ULANZI ST-06S Camera Hot Shoe Phone Holder Instruction Manual

1. ആമുഖം

The ULANZI ST-06S is a versatile phone holder designed for photographers and videographers. It allows you to securely mount your smartphone to a camera's hot shoe or a tripod, providing flexible positioning for various shooting scenarios. This manual provides detailed instructions for the proper setup, operation, and care of your ST-06S phone holder.

2. ഉൽപ്പന്ന സവിശേഷതകൾ

• Adjustable Z-Axis Angle: Allows for pitch angle adjustments without a separate ball head.
• ബഹുമുഖ മൗണ്ടിംഗ് ഓപ്ഷനുകൾ: Features a standard 1/4" screw hole and two cold shoe mounts for accessories.
• Enhanced Safety & Ease of Use: Push-and-lock mechanism with thick, non-slip silicone pads and reinforced fixing gear.
• 360° റൊട്ടേഷൻ: Quickly switch between portrait and landscape modes.
• Compact & Compatible: Lightweight (51g) and compatible with smartphones 2.36 to 3.54 inches wide.

3. പാക്കേജ് ഉള്ളടക്കം

• 1 x ULANZI ST-06S Camera Hot Shoe Phone Holder

4. സജ്ജീകരണ നിർദ്ദേശങ്ങൾ

4.1 Attaching to a Camera Hot Shoe

1. Locate the hot shoe mount on your camera.
2. Slide the base of the ULANZI ST-06S into the camera's hot shoe.
3. Tighten the locking knob at the base of the phone holder to secure it firmly in place.

Figure 4.1: Phone holder attached to a DSLR camera.

4.2 Attaching to a Tripod or Monopod

1. Locate the 1/4" screw hole at the bottom of the ULANZI ST-06S.
2. Screw the phone holder onto the 1/4" screw of your tripod, monopod, or selfie stick until secure.

Figure 4.2: Wide compatibility with various mounting options.

4.3 നിങ്ങളുടെ സ്മാർട്ട്ഫോൺ ചേർക്കൽ

1. Press the release button on the side of the phone holder to expand the clamp.
2. Carefully place your smartphone between the silicone pads.
3. Release the button to allow the clamp to securely grip your phone. Ensure the phone is centered and held firmly.

Figure 4.3: Close-up of the phone clamp മെക്കാനിസം.

5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

5.1 Adjusting the Z-Axis Angle

The ST-06S features an adjustable Z-axis angle for pitch adjustments. Loosen the knob located below the phone clamp to adjust the tilt angle. Once the desired angle is achieved, tighten the knob firmly to prevent movement.

Figure 5.1: Adjusting the tilt angle.

5.2 360° ഭ്രമണം

The phone holder can rotate 360 degrees, allowing for quick switching between portrait and landscape orientations. Simply rotate the phone clamp to your preferred orientation.

Figure 5.2: 360-degree rotation for orientation changes.

5.3 കോൾഡ് ഷൂ മൗണ്ടുകൾ ഉപയോഗിക്കുന്നത്

The ST-06S is equipped with two cold shoe mounts on top of the phone clamp. These can be used to attach external accessories such as microphones or LED lights. Slide your accessory into the cold shoe mount until it clicks into place or is secured by its own locking mechanism.

ചിത്രം 5.3: ഉദാamples of using cold shoe mounts with accessories.

6. പരിപാലനം

To ensure the longevity and optimal performance of your ULANZI ST-06S phone holder, follow these maintenance guidelines:

• വൃത്തിയാക്കൽ: Wipe the holder with a soft, dry cloth. For stubborn dirt, a slightly damp തുണി ഉപയോഗിക്കാം, തുടർന്ന് ഉടനടി ഉണക്കാം. കഠിനമായ രാസവസ്തുക്കളോ ഉരച്ചിലുകളോ ഉള്ള ക്ലീനറുകളോ ഒഴിവാക്കുക.
• സംഭരണം: Store the phone holder in a cool, dry place away from direct sunlight and extreme temperatures.
• പരിശോധന: Periodically check all moving parts and screws for tightness. Ensure the silicone pads are free from debris and damage to maintain a secure grip.

7. പ്രശ്‌നപരിഹാരം

If you encounter any issues with your ULANZI ST-06S, refer to the following common problems and solutions:

8 സ്പെസിഫിക്കേഷനുകൾ

9. വാറൻ്റിയും പിന്തുണയും

For information regarding warranty coverage, technical support, or replacement parts, please refer to the official ULANZI webസൈറ്റിൽ പ്രവേശിക്കുകയോ അവരുടെ ഉപഭോക്തൃ സേവനവുമായി നേരിട്ട് ബന്ധപ്പെടുകയോ ചെയ്യുക. പ്രത്യേക വാറന്റി നിബന്ധനകൾ പ്രദേശത്തെയും റീട്ടെയിലറെയും ആശ്രയിച്ച് വ്യത്യാസപ്പെടാം.