VSYSTO Motorcycle Drive Recorder Anti-Theft Handlebar Mount User Manual

1. ആമുഖം

വാങ്ങിയതിന് നന്ദി.asing the VSYSTO Motorcycle Drive Recorder Anti-Theft Handlebar Mount. This all-metal bracket is designed to securely hold your drive recorder on motorcycle handlebars, offering robust protection and flexible positioning. It features a durable construction and an anti-theft design to safeguard your device.

This mount is compatible with various VSYSTO drive recorder models and standard GoPro-style camera adapters.

2. പാക്കേജ് ഉള്ളടക്കം

• VSYSTO Anti-Theft Handlebar Mount (1 unit)
• Dedicated Hex Wrench (1 unit)
• Mounting Hardware (screws, nuts)

3 അനുയോജ്യത

This mount is specifically designed for the following VSYSTO drive recorder models:

• VSYSTO A6F
• VSYSTO A2F
• VSYSTO A2X
• VSYSTO B2U
• VSYSTO P4.5

It also supports various commercially available camera adapters and brackets that utilize the GoPro standard mounting interface.

4 സുരക്ഷാ വിവരങ്ങൾ

• Ensure all screws are tightened securely before riding to prevent the device from falling off.
• നിങ്ങളുടെ കാര്യം തടസ്സപ്പെടുത്തരുത് view or interfere with the operation of your motorcycle controls when installing the mount.
• Regularly check the mount for any signs of wear or loosening, especially after long rides or exposure to vibrations.
• Installation should be performed by an adult or under adult supervision.

5. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

Follow these steps to install the VSYSTO handlebar mount and attach your drive recorder:

5.1. Attaching the Mount to the Handlebar

1. Identify a suitable position on your motorcycle's handlebar that does not obstruct your view or interfere with controls.
2. Loosen the screws on the handlebar clamp section of the mount using the dedicated hex wrench.
3. cl സ്ഥാപിക്കുകamp around the handlebar and align it to your desired position.
4. Tighten the screws firmly with the hex wrench until the mount is securely fixed to the handlebar. Do not overtighten.

Image: The VSYSTO handlebar mount shown with its hex wrench and examples of installation on motorcycle handlebars, demonstrating its secure fit and adjustability.

5.2. Attaching Your Drive Recorder

1. The mount features a universal interface compatible with GoPro standard brackets. Attach your drive recorder's adapter or bracket to the mount's top plate.
2. Secure the drive recorder to the mount using the appropriate screws or locking mechanisms provided with your recorder or adapter.
3. Ensure the connection is firm and the drive recorder is stable.

Image: The VSYSTO mount displaying its compatibility with various VSYSTO drive recorder models (A2F, A2X, P4.5, P6F, A6X) and its adjustable design.

6. പ്രവർത്തനവും ക്രമീകരണവും

The VSYSTO mount offers extensive adjustability for optimal viewകോണുകൾ:

• 360° റൊട്ടേഷൻ: The entire mount can be rotated 360 degrees around the handlebar axis, allowing for flexible positioning.
• 270° ടിൽറ്റ് ക്രമീകരണം: The tripod head section, which secures the main unit (drive recorder), can be adjusted up to 270 degrees vertically. This allows you to fine-tune the camera's tilt angle.

To adjust the angle, slightly loosen the relevant adjustment screws, position the device as desired, and then re-tighten the screws firmly using the hex wrench.

7. പരിപാലനം

• വൃത്തിയാക്കൽ: മൗണ്ട് ഒരു സോഫ്റ്റ്, ഡി ക്ലീനർ ഉപയോഗിച്ച് തുടയ്ക്കുക.amp പൊടിയും അഴുക്കും നീക്കം ചെയ്യാനുള്ള തുണി. കഠിനമായ രാസവസ്തുക്കളോ ഉരച്ചിലുകളുള്ള ക്ലീനറുകളോ ഉപയോഗിക്കുന്നത് ഒഴിവാക്കുക.
• പരിശോധന: Periodically inspect all screws and joints for tightness. Re-tighten any loose components using the dedicated hex wrench.
• സംഭരണം: If removing the mount for extended periods, store it in a dry, cool place away from direct sunlight.

8. പ്രശ്‌നപരിഹാരം

• Mount feels loose on handlebar: ഹാൻഡിൽബാർ cl ഉറപ്പാക്കുകamp screws are fully tightened with the hex wrench. If the handlebar diameter is too small, consider using rubber shims (not included) for a tighter fit.
• Device wobbles or shakes: Check that the connection between the drive recorder and the mount's top plate is secure. Ensure all adjustment screws on the mount are tightened.
• ആംഗിൾ ക്രമീകരിക്കുന്നതിലെ ബുദ്ധിമുട്ട്: Loosen the adjustment screws slightly more before attempting to reposition. Ensure no debris is obstructing the moving parts.

9 സ്പെസിഫിക്കേഷനുകൾ

Image: Detailed dimensions of the VSYSTO handlebar mount, including height, width, and clamp diameter, for reference during installation.

10. വാറൻ്റിയും പിന്തുണയും

The VSYSTO Motorcycle Drive Recorder Anti-Theft Handlebar Mount (under the Motocam product line) comes with a six-month warranty period വാങ്ങിയ തീയതി മുതൽ. ഈ വാറന്റി സാധാരണ ഉപയോഗത്തിൽ നിർമ്മാണ വൈകല്യങ്ങളും മെറ്റീരിയൽ വൈകല്യങ്ങളും ഉൾക്കൊള്ളുന്നു.

For warranty claims, technical support, or any inquiries regarding your product, please contact VSYSTO customer service through the retailer where you purchased the product or visit the official VSYSTO webബന്ധപ്പെടാനുള്ള വിവരങ്ങൾക്കുള്ള സൈറ്റ്.

വാറന്റി സാധൂകരണത്തിനായി നിങ്ങളുടെ വാങ്ങിയതിന്റെ തെളിവ് സൂക്ഷിക്കുക.