1. ആമുഖം
The Spektrum Smart ESC Programming Update Box (SPMXCA200) is designed to facilitate the setup, review, adjustment, and saving of operating parameters for your Avian and Firma electronic speed controls (ESCs). This device also allows for firmware updates via a PC using the Spektrum SmartLink app and can check the balance of your LiPo battery cells.
2. ബോക്സിൽ എന്താണുള്ളത്?
- Spektrum Smart ESC Programming Update Box: Avian and Firma, SPMXCA200
- USB കേബിൾ
- ഇൻസ്ട്രക്ഷൻ മാനുവൽ
3 സുരക്ഷാ വിവരങ്ങൾ
മുന്നറിയിപ്പ്:
Read the ENTIRE instruction manual to become familiar with the features of the product before operating. Failure to operate the product correctly can result in damage to the product, personal property and cause serious injury. This is a sophisticated hobby product. It must be operated with caution and common sense and requires some basic mechanical ability. Failure to operate this product in a safe and responsible manner could result in injury or damage to the product or other property. This product is not intended for use by children. Do not use with incompatible components or alter this product in any way outside of the instructions provided by Horizon Hobby, LLC. This manual contains instructions for safety, operation and maintenance. It is essential to read and follow all the instructions and warnings in the manual, prior to assembly, setup or use, in order to operate correctly and avoid damage or serious injury.
4. സജ്ജീകരണം
4.1. ഡിവൈസ് ഓവർview
4.2. Connecting to an ESC
- Ensure your RC vehicle is powered off.
- Locate the fan port on your Spektrum Smart ESC (Avian or Firma).
- Disconnect the fan cable from the ESC's fan port, if applicable.
- Connect the provided lead cable from the programmer to the ESC's fan port.
- Power on your RC vehicle. The programmer will automatically power on and display information from the ESC.
4.3. Connecting to a PC for Firmware Updates
- Connect the programmer to your PC using the included USB cable.
- Download and install the Spektrum SmartLink PC app from the official Spektrum webസൈറ്റ്.
- Launch the SmartLink app. The app will detect the connected programmer and allow you to check for and apply firmware updates for both the programmer and the connected ESC.
വീഡിയോ 4.1: ഒരു ഓവർview of Spektrum Smart ESCs, demonstrating their features and connectivity with Smart Technology. This video highlights the integration of ESCs within the Spektrum Smart ecosystem, which the programming box facilitates.
5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ
5.1. Adjusting ESC Parameters
Once connected to an ESC and powered on, the programmer's display will show the current settings. Use the buttons to navigate and adjust parameters:
- തിരഞ്ഞെടുക്കുക: Use to navigate through different parameters.
- എഡിറ്റ്: Press to enter edit mode for a selected parameter. Use SELECT to change values.
- പുന SE സജ്ജമാക്കുക: Resets the currently selected parameter to its default value.
- സംരക്ഷിക്കുക: Crucially, press SAVE after each individual parameter adjustment to ensure the changes are applied to the ESC. If you do not save, the changes will be lost when the device is disconnected or reset.
5.2. Checking LiPo Battery Cell Balance
The programming box also functions as a LiPo battery checker. Connect your LiPo battery's balance lead to the designated BATT port on the side of the programmer. The display will show the voltage of each cell, allowing you to monitor the battery's health and balance.
6. പരിപാലനം
- ഉപകരണം വൃത്തിയായും പൊടിയും ഈർപ്പവും ഇല്ലാതെയും സൂക്ഷിക്കുക. വൃത്തിയാക്കാൻ മൃദുവായതും ഉണങ്ങിയതുമായ തുണി ഉപയോഗിക്കുക.
- Store the programmer in a cool, dry place away from direct sunlight and extreme temperatures.
- Regularly check for firmware updates using the Spektrum SmartLink PC app to ensure optimal performance and compatibility with the latest ESCs.
7. പ്രശ്നപരിഹാരം
- Programmer not powering on: Ensure the programmer is correctly connected to a powered-on ESC or a PC via USB.
- Settings not saving: Always press the 'SAVE' button after making any adjustments to a parameter. Changes are not automatically saved.
- ESC not connecting/displaying incorrect information: Verify that both the programmer and the ESC have the latest firmware. Connect the programmer to a PC and use the Spektrum SmartLink app to update both devices. Ensure the connection cable between the programmer and ESC is secure and correctly inserted into the fan port.
- പ്രദർശന പ്രശ്നങ്ങൾ: If the display is blank or unreadable, try disconnecting and reconnecting the power source. If the issue persists, check for firmware updates.
8 സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | വിശദാംശങ്ങൾ |
|---|---|
| ബ്രാൻഡ് നാമം | സ്പെക്ട്രം |
| മോഡൽ നമ്പർ | SPMXCA200 |
| ഇനത്തിൻ്റെ തരം പേര് | Programming Update Box |
| ഉൾപ്പെടുത്തിയ ഘടകങ്ങൾ | Spektrum Smart ESC Programming Update Box: Avian and Firma, SPMXCA200, USB Cable |
| ഇനത്തിൻ്റെ ഭാരം | 2.24 ഔൺസ് |
| ഇനത്തിൻ്റെ അളവുകൾ | 4.65 x 4.31 x 1.1 ഇഞ്ച് |
| മെറ്റീരിയൽ തരം | പ്ലാസ്റ്റിക് |
| നിറം | കറുപ്പ് |
| ഓപ്പറേഷൻ മോഡ് | മാനുവൽ |
| പിന്തുണയ്ക്കുന്ന ബാറ്ററി തരങ്ങൾ | No batteries required (LiPo battery required for use) |
9. വാറൻ്റിയും പിന്തുണയും
This product is manufactured by Spektrum, a brand of Horizon Hobby, LLC. For detailed warranty information, technical support, or service inquiries, please refer to the official Horizon Hobby webസൈറ്റ് (www.horizonhobby.com) or contact their customer service directly. Always use genuine replacement parts and follow manufacturer guidelines to ensure product longevity and safe operation.
