ആമുഖം
This manual provides essential information for the safe installation, operation, and maintenance of your Amazon Basics 40W Waterproof LED Outdoor Motion Sensor Security Light. Please read these instructions thoroughly before installation and retain them for future reference.
സുരക്ഷാ വിവരങ്ങൾ
- മുന്നറിയിപ്പ്: വൈദ്യുതാഘാത സാധ്യത. ഇൻസ്റ്റാൾ ചെയ്യുന്നതിനോ സർവീസ് ചെയ്യുന്നതിനോ മുമ്പ് ഫ്യൂസിലോ സർക്യൂട്ട് ബ്രേക്കറിലോ വൈദ്യുതി വിച്ഛേദിക്കുക.
- ഉൽപ്പന്നത്തിൻ്റെ നിർമ്മാണവും പ്രവർത്തനവും ഉൾപ്പെട്ടിരിക്കുന്ന അപകടങ്ങളും പരിചയമുള്ള ഒരു വ്യക്തി ബാധകമായ ഇൻസ്റ്റാളേഷൻ കോഡിന് അനുസൃതമായി ഈ ഉൽപ്പന്നം ഇൻസ്റ്റാൾ ചെയ്തിരിക്കണം.
- Ground the fixture properly to avoid potential electrical shock and to ensure reliable operation.
- ഒരു ഡിമ്മർ സ്വിച്ചിലേക്ക് കണക്റ്റ് ചെയ്യരുത്.
- LED പ്രകാശ സ്രോതസ്സിലേക്ക് നേരിട്ട് നോക്കരുത്.
- എല്ലാ കണക്ഷനുകളും സുരക്ഷിതവും ശരിയായി ഇൻസുലേറ്റ് ചെയ്തതുമാണെന്ന് ഉറപ്പാക്കുക.
- പ്രവർത്തന താപനില പരിധി: -20°C മുതൽ 40°C വരെ (-4°F മുതൽ 104°F വരെ).
പാക്കേജ് ഉള്ളടക്കം
- Amazon Basics 40W LED Outdoor Motion Sensor Security Light (1 unit)
- മൗണ്ടിംഗ് ഹാർഡ്വെയർ (സ്ക്രൂകൾ, വയർ നട്ടുകൾ)
- ഇൻസ്ട്രക്ഷൻ മാനുവൽ
ഉൽപ്പന്ന സവിശേഷതകൾ
The Amazon Basics 40W LED Outdoor Motion Sensor Security Light is designed for reliable outdoor illumination with energy efficiency and adjustable features.
- ഉയർന്ന തെളിച്ചം: 2 ultra-bright LED light heads produce up to 4000 lumens at 5000K daylight color temperature.
- ചലനം കണ്ടെത്തൽ: Integrated motion sensor with up to 180° detection angle and a range of up to 49 feet.
- ക്രമീകരിക്കാവുന്ന ഡിസൈൻ: LED heads are flexibly adjustable 350° horizontally and 60° vertically. The motion sensor is adjustable 180° horizontally and 90° vertically.
- നീണ്ടുനിൽക്കുന്ന നിർമ്മാണം: Aluminum design for effective heat dissipation and a bulb lifespan of up to 50,000 hours.
- കാലാവസ്ഥാ പ്രതിരോധം: Waterproof rating ensures resilience against rain, sleet, or snow.
- ETL സാക്ഷ്യപ്പെടുത്തിയത്: Meets safety and quality standards.
ചിത്രം: മുൻഭാഗം view of the Amazon Basics 40W LED Outdoor Motion Sensor Security Light, highlighting its two adjustable light heads and motion sensor.
സജ്ജമാക്കുക
Follow these steps for proper installation of your security light. Professional installation is recommended if you are unfamiliar with electrical wiring.
- ഇൻസ്റ്റാളേഷനായി തയ്യാറെടുക്കുക:
- Turn off power at the circuit breaker or fuse box before beginning installation.
- Ensure the mounting surface is stable and can support the fixture's weight.
- ഫിക്സ്ചർ മൌണ്ട് ചെയ്യുക:
- നൽകിയിരിക്കുന്ന സ്ക്രൂകൾ ഉപയോഗിച്ച് ജംഗ്ഷൻ ബോക്സിലേക്ക് മൗണ്ടിംഗ് ബ്രാക്കറ്റ് അറ്റാച്ചുചെയ്യുക.
- Connect the electrical wires: black to black (live), white to white (neutral), and green/bare copper to ground. Secure connections with wire nuts.
- Carefully push the wires into the junction box and secure the fixture to the mounting bracket.
- ലൈറ്റ് ഹെഡുകളും സെൻസറും ക്രമീകരിക്കുക:
- Loosen the adjustment screws on the light heads and motion sensor.
- Position the light heads to cover the desired illumination area.
- Angle the motion sensor to optimize detection coverage, typically pointing slightly downwards.
- Tighten all adjustment screws securely.
- പവർ പുന ore സ്ഥാപിക്കുക: സർക്യൂട്ട് ബ്രേക്കറിൽ പവർ വീണ്ടും ഓണാക്കുക.
Image: The security light installed on the exterior wall of a building, illuminating the area below.
പ്രവർത്തന നിർദ്ദേശങ്ങൾ
The motion sensor has adjustable settings to customize its operation.
- സമയ ക്രമീകരണം: This dial controls how long the light remains on after motion is detected. Adjust from 5 seconds to 12 minutes.
- LUX (Daylight) Setting: This dial determines the ambient light level at which the motion sensor becomes active.
- Turn towards the "Sun" symbol for activation during both day and night.
- Turn towards the "Moon" symbol for activation only during nighttime or low-light conditions.
- പ്രാരംഭ പവർ-ഓൺ: Upon first power-up, the light may stay on for a short period (e.g., 5 minutes) as it calibrates. After this initial period, it will operate according to your chosen settings.
മെയിൻ്റനൻസ്
- വൃത്തിയാക്കൽ: ഒരു സോഫ്റ്റ്, ഡി ക്ലീനർ ഉപയോഗിച്ച് ഫിക്സ്ചർ വൃത്തിയാക്കുക.amp തുണി. അബ്രാസീവ് ക്ലീനറുകളോ ലായകങ്ങളോ ഉപയോഗിക്കരുത്. വൃത്തിയാക്കുന്നതിന് മുമ്പ് പവർ ഓഫ് ചെയ്തിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക.
- പരിശോധന: Periodically check for loose wiring or damaged components. Replace any damaged parts immediately.
- LED- കൾ: The integrated LED bulbs are designed for long life and are not user-replaceable.
ട്രബിൾഷൂട്ടിംഗ്
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| ലൈറ്റ് ഓണാക്കില്ല. | No power; faulty wiring; LUX setting too high (daylight). | Check circuit breaker; verify wiring connections; adjust LUX setting towards "Moon" symbol. |
| വെളിച്ചം തുടർച്ചയായി തുടരുന്നു. | Motion sensor continuously triggered; TIME setting too long; LUX setting too low (always active). | Adjust sensor angle to avoid constant triggers; reduce TIME setting; adjust LUX setting towards "Sun" symbol. |
| വെളിച്ചം മിന്നിമറയുന്നു അല്ലെങ്കിൽ മങ്ങുന്നു. | Loose wiring connection; power fluctuations. | Check and secure all wiring connections; consult an electrician if power fluctuations persist. |
| മോഷൻ സെൻസർ ശ്രേണി മോശമാണ്. | Sensor obstructed; incorrect angle; environmental factors (temperature). | Clear obstructions; adjust sensor angle; consider environmental conditions. |
സ്പെസിഫിക്കേഷനുകൾ
| മോഡൽ നമ്പർ | SM-4000-180-2H |
| ബ്രാൻഡ് | ആമസോൺ അടിസ്ഥാനങ്ങൾ |
| വാട്ട്tage | 40W |
| തെളിച്ചം | 4000 ല്യൂമെൻസ് |
| വർണ്ണ താപനില | 5000K പകൽ വെളിച്ചം |
| കണ്ടെത്തൽ ആംഗിൾ | 180° വരെ |
| കണ്ടെത്തൽ പരിധി | 49 അടി വരെ |
| വാല്യംtage | 120 വോൾട്ട് |
| മെറ്റീരിയൽ | അലുമിനിയം, പ്ലാസ്റ്റിക് |
| ജല പ്രതിരോധ നില | വാട്ടർപ്രൂഫ് |
| സർട്ടിഫിക്കേഷനുകൾ | ETL സാക്ഷ്യപ്പെടുത്തിയത് |
| ഇനത്തിന്റെ അളവുകൾ (L x W x H) | 14.96" x 6.3" x 5.12" |
| ഇനത്തിൻ്റെ ഭാരം | 1.9 പൗണ്ട് |
വാറൻ്റിയും പിന്തുണയും
For warranty information or technical support, please refer to the Amazon Basics product page or contact Amazon customer service. Keep your purchase receipt for warranty claims.