Luceco LED Inspection Head Torch

ആമുഖം

This manual provides essential information for the safe and effective use of your Luceco LED Inspection Head Torch. Please read these instructions carefully before operating the device and retain them for future reference. This head torch is designed for various applications, including professional inspection, DIY tasks, camping, and other outdoor activities, offering versatile lighting modes and hands-free operation.

ചിത്രം 1: മുൻഭാഗം view of the Luceco LED Inspection Head Torch.

ഉൽപ്പന്നം കഴിഞ്ഞുview

The Luceco LED Inspection Head Torch is a versatile and durable lighting solution. Key features include:

• 5 ലൈറ്റിംഗ് മോഡുകൾ: Includes 100% output, 50% output, flash mode, red light, and red flash mode.
• പിഐആർ മോഷൻ സെൻസർ: For hands-free operation, allowing activation and deactivation with a wave of the hand.
• ക്രമീകരിക്കാവുന്ന ടിൽറ്റ്: The torch head can be tilted up to 60 degrees to direct light precisely where needed.
• റീചാർജ് ചെയ്യാവുന്ന ബാറ്ററി: Integrated lithium polymer battery, conveniently charged via USB Type-C.
• നീണ്ടുനിൽക്കുന്ന നിർമ്മാണം: Lightweight ABS body with an IK04 rating, designed to withstand tough environments.
• ക്രമീകരിക്കാവുന്ന ഹെഡ്‌ബാൻഡ്: Elastic headband ensures a comfortable and secure fit for various head sizes.

സജ്ജമാക്കുക

1. പ്രാരംഭ ചാർജിംഗ്

Before first use, fully charge the head torch. Connect the provided USB Type-C cable to the charging port on the head torch and plug the other end into a compatible USB power source (e.g., computer, USB wall adapter). The charging indicator light will show the charging status. A full charge typically takes approximately 2.5 hours.

Figure 2: USB Type-C charging port for convenient recharging.

2. ഹെഡ്ബാൻഡ് ക്രമീകരിക്കൽ

Place the head torch on your head. Adjust the elastic headband by sliding the buckles on either side until it fits snugly and comfortably. Ensure the torch unit is centered on your forehead.

Figure 3: The adjustable headband ensures a comfortable and secure fit.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

1. പവർ ഓൺ/ഓഫ്, മോഡ് തിരഞ്ഞെടുക്കൽ

Locate the power button on the top of the head torch. Press the button to cycle through the following lighting modes:

1. ആദ്യ അമർത്തുക: 100% Light Output (150lm)
2. രണ്ടാമത്തെ അമർത്തുക: 50% Light Output
3. മൂന്നാമത്തെ അമർത്തുക: ഫ്ലാഷ് മോഡ്
4. നാലാമത്തെ അമർത്തുക: ചുവന്ന വെളിച്ചം
5. അഞ്ചാമത്തെ അമർത്തുക: റെഡ് ഫ്ലാഷ് മോഡ്
6. ആറാമത്തെ പ്രസ്സ്: ഓഫ്

To turn off the torch from any mode, press and hold the power button for approximately 2 seconds.

Figure 4: The head torch offers five versatile lighting modes.

2. PIR Motion Sensing Function

The head torch features a PIR motion sensor for hands-free control. To activate this function, press the dedicated motion sensor button (usually located near the power button). Once activated, you can turn the light on or off by waving your hand in front of the sensor.

3. Tilting the Torch Head

The torch head can be manually tilted up or down to adjust the beam angle. Gently push the torch unit to achieve the desired angle, up to 60 degrees. This allows you to focus light on specific areas without repositioning the entire head torch.

Figure 5: The torch head can be tilted for precise light direction.

മെയിൻ്റനൻസ്

1. വൃത്തിയാക്കൽ

To clean the head torch, wipe the exterior with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or internal components. Ensure the charging port cover is securely closed before cleaning to prevent water ingress.

2. ബാറ്ററി പരിചരണം

The integrated lithium polymer battery is designed for long life. To maximize battery longevity:

• Recharge the battery when the light output becomes noticeably dim.
• ബാറ്ററി ഇടയ്ക്കിടെ പൂർണ്ണമായും ഡിസ്ചാർജ് ചെയ്യുന്നത് ഒഴിവാക്കുക.
• If storing the head torch for an extended period, charge it to approximately 50% every 3-6 months.

3. സംഭരണം

Store the head torch in a cool, dry place away from direct sunlight and extreme temperatures. Keep it away from corrosive materials and out of reach of children.

ട്രബിൾഷൂട്ടിംഗ്

If you encounter issues with your Luceco LED Inspection Head Torch, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact Luceco customer support.

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റി & പിന്തുണ

The Luceco LED Inspection Head Torch comes with a 1 വർഷത്തെ നിർമ്മാതാവിന്റെ വാറന്റി വാങ്ങിയ തീയതി മുതൽ. സാധാരണ ഉപയോഗത്തിലുള്ള മെറ്റീരിയലുകളിലെയും വർക്ക്‌മാൻഷിപ്പുകളിലെയും വൈകല്യങ്ങൾ ഈ വാറന്റി ഉൾക്കൊള്ളുന്നു.

For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact the dedicated Luceco technical support team. Please have your product model number (LILH15P65-01) and proof of purchase ready when contacting support.