Andoer AD560 IV Speedlite Flash User Manual

1. ആമുഖം

The Andoer AD560 IV is a versatile 2.4G wireless universal on-camera slave speedlite flash designed for various DSLR cameras, including Canon, Nikon, Olympus, Pentax, and Sony Alpha series. This manual provides detailed instructions for setting up, operating, and maintaining your AD560 IV speedlite to ensure optimal performance.

The Andoer AD560 IV Speedlite Flash, showcasing its compact design and adjustable flash head.

2. ഉൽപ്പന്നം കഴിഞ്ഞുview ഘടകങ്ങളും

Familiarize yourself with the main parts of your Andoer AD560 IV Speedlite:

Detailed diagram illustrating the key components of the Andoer AD560 IV Speedlite, including the control panel, flash head, built-in wide panel, lock ring, battery compartment, universal hotshoe, sync cord jack, and external power port.

• ഫ്ലാഷ് ഹെഡ്: Adjustable for bounce flash and direct lighting.
• Built-in Wide Panel: Retractable panel for wider flash coverage.
• നിയന്ത്രണ പാനൽ: LCD display and buttons for mode selection and settings adjustment.
• ബാറ്ററി കമ്പാർട്ട്മെൻ്റ്: 4 AA ബാറ്ററികൾ ഉൾക്കൊള്ളുന്നു.
• Universal Hotshoe: For mounting the speedlite onto a camera.
• ലോക്ക് റിംഗ്: Secures the speedlite to the camera's hotshoe.
• Sync Cord Jack (PC Port): For wired synchronization with a camera or trigger.
• External Power Port: For connecting an external power pack (not included).

3. സജ്ജീകരണം

3.1. ബാറ്ററി ഇൻസ്റ്റാളേഷൻ

1. Open the battery compartment cover located on the side of the speedlite.
2. Insert four (4) AA batteries (not included) according to the polarity indicators (+/-) inside the compartment.
3. ബാറ്ററി കമ്പാർട്ട്മെൻ്റ് കവർ സുരക്ഷിതമായി അടയ്ക്കുക.

Note: Ensure batteries are inserted correctly. Incorrect insertion can damage the unit. Always use fresh, high-quality batteries for optimal performance.

3.2. Mounting the Speedlite

1. Slide the speedlite's hotshoe foot into your camera's hotshoe mount.
2. Rotate the lock ring clockwise until the speedlite is securely fastened to the camera.
3. To remove, rotate the lock ring counter-clockwise and slide the speedlite off the hotshoe.

4. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

4.1. പവർ ഓൺ/ഓഫ്

അമർത്തുക ഓൺ/ഓഫ് button to power the speedlite on or off. The LCD display will illuminate when powered on.

4.2. M Flash Mode (Manual Mode)

In M mode, you manually set the flash output level. Press the മോഡ് button until 'M' is displayed on the LCD. Use the - ഒപ്പം + buttons to adjust the flash output from 1/128 to 1/1 (full power).

4.3. S Flash Mode (Slave Mode)

The AD560 IV operates as a slave unit. It cannot function as a master unit to trigger other speedlites. In S mode, the speedlite will fire when it detects a flash from another flash unit. Press the മോഡ് button to cycle through modes until 'S' is displayed.

4.4. Wireless Mode

The speedlite features a 2.4G wireless triggering sensor with a range of approximately 100 meters. This allows for off-camera flash operation when triggered by a compatible wireless transmitter (not included). To activate wireless mode, select the appropriate mode on the control panel.

The Andoer AD560 IV Speedlite highlighting its 2.4G wireless transmission capability, enabling remote triggering up to 100 meters.

4.5. Flash Output Control

The AD560 IV offers 8 levels of output control (1/128 to 1/1) with 29 levels of fine tuning. Use the - ഒപ്പം + buttons to precisely adjust the flash power according to your lighting requirements.

Visual representation of the Andoer AD560 IV Speedlite's flash output control, ranging from 1/128 to full power (1/1), demonstrating its versatility for various lighting conditions.

4.6. Sound Prompt Function

The speedlite includes a sound prompt function where different sounds indicate various working situations, helping you focus on shooting without constantly checking the display. This function can be enabled or disabled as needed.

4.7. PC Port Synchronization

Utilize the PC port to synchronize the flash with your camera or an external trigger via a PC sync cable (not included). This provides an alternative method for triggering the flash.

4.8. High-Speed Continuous Shooting

When the flash output level is set to 1/8 or below, the AD560 IV supports high-speed continuous shooting at up to 8 frames per second (FPS).

4.9. Automatic Setting Saving

The Andoer AD560 IV speedlite automatically saves your current settings, so they are retained even after powering off the unit.

5. പരിപാലനം

• Keep the speedlite clean and dry. Avoid exposure to dust, dirt, and moisture.
• പുറംഭാഗം വൃത്തിയാക്കാൻ മൃദുവായതും ഉണങ്ങിയതുമായ തുണി ഉപയോഗിക്കുക. കഠിനമായ അഴുക്കിന്, അല്പം ഡി.amp തുണി ഉപയോഗിക്കാം, തുടർന്ന് ഉണങ്ങിയ തുണി ഉപയോഗിക്കാം.
• വീര്യം കൂടിയ ഡിറ്റർജന്റുകളോ ലായകങ്ങളോ ഉപയോഗിക്കരുത്.
• When not in use for extended periods, remove the batteries to prevent leakage and damage.
• Store the speedlite in its protective bag in a cool, dry place.

6. പ്രശ്‌നപരിഹാരം

• ഫ്ലാഷ് കത്തുന്നില്ല: Ensure batteries are correctly installed and charged. Check that the speedlite is securely mounted on the camera's hotshoe or properly connected via PC sync cable. Verify the camera's flash settings.
• Low flash power: Check the flash output setting (M mode). Ensure batteries have sufficient charge.
• Wireless triggering issues: Confirm the speedlite is in the correct slave mode. Ensure the wireless trigger (if used) is compatible and functioning correctly. Check for obstructions between the trigger and the speedlite.
• Speedlite not powering on: Verify battery installation and charge level.
• പ്രധാന കുറിപ്പ്: This speedlite is designed as a slave unit and cannot function as a master unit to trigger other speedlites.

7 സ്പെസിഫിക്കേഷനുകൾ

8. വാറൻ്റിയും പിന്തുണയും

Warranty information for the Andoer AD560 IV Speedlite Flash is typically provided at the point of purchase or included with the product packaging. Please refer to your purchase documentation for specific warranty terms and conditions.

For technical support, service, or inquiries regarding your product, please contact Andoer customer service through their official website or the retailer from whom you purchased the product. Ensure you have your product model and purchase details available when seeking support.