1. ആമുഖം
The Sartorius YSH13 Safe-Lock Tube Holder is an essential accessory designed to optimize the performance of Sartorius Cubis II series micro-balances. This holder provides a stable and secure platform for weighing samples in tubes up to 2 mL capacity, ensuring accurate and reproducible results in laboratory environments.
പ്രധാന സവിശേഷതകളിൽ ഇവ ഉൾപ്പെടുന്നു:
- Designed for safe and secure holding of tubes during weighing.
- Compatible with micro-balances, specifically Sartorius Cubis II series.
- Accommodates tubes with a capacity of up to 2 mL.
- Constructed for durability and stability in laboratory settings.
2. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
Proper setup of the YSH13 Safe-Lock Tube Holder is crucial for accurate weighing. Follow these steps to install the holder on your micro-balance:
- Ensure your micro-balance is powered off and stable on a level surface.
- Carefully open the weighing chamber of your micro-balance.
- Locate the designated pan or attachment point for accessories within the weighing chamber.
- Place the Sartorius YSH13 Safe-Lock Tube Holder securely onto the balance pan or attachment point. Ensure it sits flat and does not wobble.
- Close the weighing chamber door gently.
- Power on your micro-balance and allow it to stabilize and perform its self-calibration routine.
- Perform a preliminary tare or calibration with the empty tube holder in place to ensure accurate measurements.
Figure 2.1: The Sartorius YSH13 Safe-Lock Tube Holder in use on a micro-balance, with a sample being transferred into a tube.
3. പ്രവർത്തന നിർദ്ദേശങ്ങൾ
Once the tube holder is installed, follow these steps for accurate sample weighing:
- Open the weighing chamber door.
- Gently place your sample tube (up to 2 mL) into the Safe-Lock Tube Holder. Ensure the tube is seated firmly and vertically.
- Close the weighing chamber door.
- Allow the balance reading to stabilize.
- Tare the balance with the empty tube in place if you wish to measure the net weight of the sample.
- നിങ്ങളുടെ അക്കൗണ്ടുകൾ ശ്രദ്ധാപൂർവ്വം ചേർക്കുകample to the tube using appropriate laboratory tools (e.g., spatula, pipette). Avoid touching the tube holder or balance during sample കൂട്ടിച്ചേർക്കൽ.
- Wait for the balance reading to stabilize before recording the measurement.
- After weighing, remove the tube carefully and close the weighing chamber door.
പ്രധാനപ്പെട്ടത്: Always handle the tube holder and tubes with care to prevent damage to the balance or inaccurate readings. Avoid sudden movements or impacts.
4. പരിപാലനവും പരിചരണവും
To ensure the longevity and optimal performance of your Sartorius YSH13 Safe-Lock Tube Holder, follow these maintenance guidelines:
- വൃത്തിയാക്കൽ: Regularly clean the tube holder with a soft, lint-free cloth. For stubborn residues, use a mild laboratory detergent solution and wipe thoroughly. Ensure no liquid enters the balance mechanism.
- ഉണക്കൽ: After cleaning, ensure the tube holder is completely dry before placing it back on the balance.
- സംഭരണം: When not in use, store the tube holder in a clean, dry environment, preferably in its original packaging or a protective container, to prevent dust accumulation and damage.
- പരിശോധന: Periodically inspect the holder for any signs of wear, damage, or deformation. Discontinue use if any damage is observed that could affect its stability or weighing accuracy.
5. പ്രശ്നപരിഹാരം
This section addresses common issues you might encounter with the tube holder.
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| Unstable balance readings with holder in place. | Holder not seated properly; external vibrations; air currents. | Ensure holder is flat and stable. Check for drafts or vibrations in the lab. Close weighing chamber door completely. |
| Tube does not fit securely. | Tube size exceeds 2 mL capacity; incorrect tube type. | Verify tube capacity is 2 mL or less. Use standard microcentrifuge tubes or compatible lab tubes. |
| Holder appears damaged or deformed. | ശാരീരിക ആഘാതം അല്ലെങ്കിൽ അനുചിതമായ കൈകാര്യം ചെയ്യൽ. | Discontinue use. Contact Sartorius customer support for replacement options. |
6 സ്പെസിഫിക്കേഷനുകൾ
Detailed specifications for the Sartorius YSH13 Safe-Lock Tube Holder:
- മോഡൽ: YSH13
- ആക്സസറി തരം: ട്യൂബ് ഹോൾഡർ
- ശേഷി: Up to 2 mL tubes
- അനുയോജ്യത: Sartorius Cubis II series micro-balances
- പാക്കേജ് അളവുകൾ: 9 x 7 x 6 ഇഞ്ച്
- നിർമ്മാതാവ്: COLE-PARMER (as listed on product details)
- ASIN: B08CKKK729
7. വാറൻ്റിയും പിന്തുണയും
For information regarding warranty coverage, technical support, or replacement parts for your Sartorius YSH13 Safe-Lock Tube Holder, please refer to the official documentation provided with your original purchase or visit the official Sartorius webസൈറ്റ്. ഉപഭോക്തൃ സേവനത്തിനായുള്ള കോൺടാക്റ്റ് വിശദാംശങ്ങൾ സാധാരണയായി നിർമ്മാതാവിന്റെ സൈറ്റിൽ ലഭ്യമാണ്. webസൈറ്റ്.
It is recommended to register your product with Sartorius, if applicable, to receive updates and support.