ജെമ്മ ജോയ് AT100

Gemma Joy Baby Sleep Soother Bunny Instruction Manual

മോഡൽ: AT100

ആമുഖം

Thank you for choosing the Gemma Joy Baby Sleep Soother Bunny. This device is designed to provide a comforting and soothing environment for your baby, aiding in sleep with various sounds and a gentle night light. Please read this manual thoroughly before use to ensure proper operation and safety.

സുരക്ഷാ വിവരങ്ങൾ

  • Always ensure the soother is placed securely and out of reach of the baby's face to prevent suffocation hazards.
  • Do not place the soother inside the crib with a sleeping infant. Utilize the Velcro strap to attach it to the outside of the crib.
  • Keep the soother away from water and moisture.
  • Use only the specified batteries (3 AA) and ensure correct polarity during installation.
  • പഴയതും പുതിയതുമായ ബാറ്ററികളോ വ്യത്യസ്ത തരം ബാറ്ററികളോ മിക്സ് ചെയ്യരുത്.
  • Remove batteries if the soother will not be used for an extended period.
  • ഈ ഉൽപ്പന്നം ഒരു കളിപ്പാട്ടമല്ല. മുതിർന്നവരുടെ മേൽനോട്ടം ശുപാർശ ചെയ്യുന്നു.

പാക്കേജ് ഉള്ളടക്കം

  • 1 x Gemma Joy Baby Sleep Soother Bunny
  • 3 x AA ബാറ്ററികൾ (ഉൾപ്പെട്ടിരിക്കുന്നു)
  • 1 x ഇൻസ്ട്രക്ഷൻ മാനുവൽ

സജ്ജമാക്കുക

  1. Unpack the Gemma Joy Baby Sleep Soother Bunny from its packaging.
  2. Locate the battery compartment on the back of the soother, usually secured with a Velcro closure.
  3. Open the compartment and insert the 3 AA batteries, ensuring correct polarity.
  4. ബാറ്ററി കമ്പാർട്ട്മെൻ്റ് സുരക്ഷിതമായി അടയ്ക്കുക.
  5. The soother is now ready for use.
Gemma Joy Baby Sleep Soother Bunny in a crib

Image: The Gemma Joy Baby Sleep Soother Bunny positioned on the side of a crib, ready for use.

Video: A demonstration of the Gemma Joy Bedtime Bunny, showing its features and how it can be used in a nursery setting.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The Gemma Joy Baby Sleep Soother Bunny features multiple functions to help soothe your baby. Controls are typically located on the paws and ears of the bunny.

  • പവർ ഓൺ/ഓഫ്: Press and hold the power button (often on one of the paws) for 3 seconds to turn the unit on or off.
  • ശബ്‌ദ തിരഞ്ഞെടുപ്പ്: Press the buttons on the paws to cycle through different sound modes, including white noise, shush, heartbeat, and lullabies.
  • വോളിയം നിയന്ത്രണം: Use the buttons located on the ears to adjust the volume up or down.
  • രാത്രി വെളിച്ചം: Activate the gentle red glow by pressing the designated button (often on a paw or the belly). This light creates a calming atmosphere without harsh brightness.
  • ക്രൈ സെൻസർ: The soother is equipped with a smart cry sensor. When activated, it will automatically detect your baby's fussiness and play calming sounds to help them resettle.
Gemma Joy Baby Sleep Soother Bunny with feature callouts

Image: The Gemma Joy Baby Sleep Soother Bunny highlighting its cry sensor, gentle red glow, and various calming sounds.

Video: A demonstration of the Gemma Joy Bedtime Baby Soothers, showcasing their various sound and light features.

Video: A demonstration focusing on the cry-activated heartbeat feature of the Gemma Joy Bedtime Baby Soothers.

മെയിൻ്റനൻസ്

  • വൃത്തിയാക്കൽ: Surface clean only. Do not immerse the soother in water. Use a damp cloth with mild soap to gently clean the surface. Allow to air dry completely.
  • സംഭരണം: ഉപയോഗത്തിലില്ലാത്തപ്പോൾ തണുത്തതും ഉണങ്ങിയതുമായ സ്ഥലത്ത് സൂക്ഷിക്കുക.
  • ബാറ്ററി മാറ്റിസ്ഥാപിക്കൽ: Replace all 3 AA batteries when the sound or light functions become weak or inconsistent.

ട്രബിൾഷൂട്ടിംഗ്

പ്രശ്നംസാധ്യമായ കാരണംപരിഹാരം
Soother does not turn on.ബാറ്ററികൾ ഡെഡ് അല്ലെങ്കിൽ തെറ്റായി ഇൻസ്റ്റാൾ ചെയ്തു.ബാറ്ററി പോളാരിറ്റി പരിശോധിക്കുക അല്ലെങ്കിൽ പുതിയ ബാറ്ററികൾ ഉപയോഗിച്ച് മാറ്റിസ്ഥാപിക്കുക.
ശബ്ദം വികലമാണ് അല്ലെങ്കിൽ വളരെ കുറവാണ്.Low battery power or volume setting is too low.Replace batteries or adjust volume using the ear buttons.
Cry sensor not activating.Sensor sensitivity may be too low or obstructed.Ensure the sensor area is clear. Check if the cry sensor mode is enabled.
ലൈറ്റ് പ്രവർത്തിക്കുന്നില്ല.Light function is not activated or batteries are low.Press the light button to activate. Replace batteries if necessary.

സ്പെസിഫിക്കേഷനുകൾ

  • ഉൽപ്പന്ന അളവുകൾ: 5 x 7 x 11 ഇഞ്ച്
  • ഇനം മോഡൽ നമ്പർ: AT100
  • ബാറ്ററികൾ: 3 AA ബാറ്ററികൾ ആവശ്യമാണ് (ഉൾപ്പെടുന്നു)
  • മെറ്റീരിയൽ തരം: പരുത്തി
  • ഇനത്തിൻ്റെ ഭാരം: 10.2 ഔൺസ്
  • അധിക സവിശേഷതകൾ: Light, Sound, Cry Sensor

വാറൻ്റി & പിന്തുണ

Gemma Joy products are designed for quality and durability. For any issues or support needs, please refer to the contact information provided on the product packaging or visit the official Gemma Joy webസൈറ്റ്. വാറൻ്റി ക്ലെയിമുകൾക്കായി നിങ്ങളുടെ വാങ്ങൽ രസീത് സൂക്ഷിക്കുക.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.