VEVOR 5T Pneumatic Air Jack Instruction Manual

1. ആമുഖം

The VEVOR 5T Pneumatic Air Jack is a robust and efficient lifting device designed for various vehicles, including cars, minivans, and SUVs. Constructed from high-strength steel, this air jack offers a maximum lifting capacity of 5 tons (11023 lbs) and can raise a vehicle from 6.3 inches (16 cm) to 15.75 inches (40 cm) in approximately 3-5 seconds. Its triple airbag design ensures stable and secure lifting, making it suitable for use on diverse terrains, including soft ground, sand, or muddy roads.

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your VEVOR Pneumatic Air Jack. Please read it thoroughly before initial use.

Image 1.1: The VEVOR 5T Pneumatic Air Jack positioned under a vehicle for lifting. It features a triple airbag design and a sturdy base with wheels for maneuverability.

Image 1.2: The VEVOR Pneumatic Air Jack demonstrating its lifting capability, supporting a vehicle with its inflated airbags. The image highlights its application for automotive maintenance.

2. സുരക്ഷാ നിർദ്ദേശങ്ങൾ

മുന്നറിയിപ്പ്: ഈ സുരക്ഷാ നിർദ്ദേശങ്ങൾ പാലിക്കുന്നതിൽ പരാജയപ്പെടുന്നത് ഗുരുതരമായ പരിക്കോ സ്വത്ത് നാശമോ ഉണ്ടാക്കിയേക്കാം.

• എയർ ജാക്ക് പ്രവർത്തിപ്പിക്കുന്നതിന് മുമ്പ് എല്ലായ്പ്പോഴും മുഴുവൻ മാനുവലും വായിച്ച് മനസ്സിലാക്കുക.
• Ensure the jack is placed on a firm, level surface. Avoid uneven or soft ground.
• Never exceed the rated lifting capacity of 5 tons (11023 lbs).
• Always use appropriate jack stands to support the vehicle once it is lifted. Never work under a vehicle supported only by the air jack.
• Keep hands, feet, and other body parts clear of the jack and the vehicle during lifting and lowering operations.
• Ensure the air supply is clean and dry. Use an air compressor with sufficient capacity and pressure.
• Do not modify the air jack in any way. Use only original replacement parts.
• Inspect the jack for damage or wear before each use. Do not use if damaged.
• സുരക്ഷാ ഗ്ലാസുകളും കയ്യുറകളും പോലുള്ള ഉചിതമായ വ്യക്തിഗത സംരക്ഷണ ഉപകരണങ്ങൾ ധരിക്കുക.
• ജോലിസ്ഥലത്ത് നിന്ന് കുട്ടികളെയും കാഴ്ചക്കാരെയും അകറ്റി നിർത്തുക.

3. ഉൽപ്പന്ന ഘടകങ്ങൾ

The VEVOR Pneumatic Air Jack consists of several key components designed for durability and ease of use:

• High-Strength Steel Frame: Provides overall structural integrity and durability.
• Triple Airbag System: Made from rugged, high-tightness rubber to prevent air leakage and ensure stable lifting.
• Thickened Rubber Pad: Located at the top contact point, it protects the vehicle's chassis from damage during lifting.
• നിയന്ത്രണ ഹാൻഡിൽ: Ergonomically designed for easy maneuvering and operation of the air valves.
• Air Inlet Valve (Green): Controls the inflation of the airbags.
• Air Release Valve (Red): Controls the deflation of the airbags.
• Durable Rubber Wheels: Facilitate easy movement and positioning of the jack, suitable for various surfaces.

ചിത്രം 3.1: ക്ലോസ്-അപ്പ് views of the VEVOR Air Jack's construction, highlighting the thickened rubber pad for chassis protection, the rugged triple airbag for durability, and the durable rubber wheels for mobility.

ചിത്രം 3.2: വിശദമായ view of the thickened rubber pad, designed to prevent damage to the vehicle's chassis during lifting operations.

Image 3.3: A close-up of the rugged triple airbag, emphasizing its high sealing performance and wear resistance for reliable and scratch-free operation.

Image 3.4: A detailed image of one of the durable rubber wheels, highlighting its suitability for various terrains, including soft or muddy surfaces.

4. സജ്ജീകരണം

Before using the VEVOR Pneumatic Air Jack, ensure proper setup:

1. ഘടകങ്ങൾ അൺപാക്ക് ചെയ്യുക: പാക്കേജിംഗിൽ നിന്ന് എല്ലാ ഘടകങ്ങളും ശ്രദ്ധാപൂർവ്വം നീക്കം ചെയ്യുക. എല്ലാ ഭാഗങ്ങളും ഉണ്ടെന്നും കേടുപാടുകൾ സംഭവിച്ചിട്ടില്ലെന്നും ഉറപ്പാക്കുക.
2. ഹാൻഡിൽ കൂട്ടിച്ചേർക്കുക: Attach the control handle to the main body of the air jack using the provided fasteners. Ensure it is securely tightened.
3. എയർ ഹോസ് ബന്ധിപ്പിക്കുക: Connect your air compressor hose to the air inlet valve (green valve) on the jack's control unit. Ensure a tight, leak-free connection.
4. വർക്ക് ഏരിയ തയ്യാറാക്കുക: Position the vehicle on a firm, level surface. Engage the parking brake and block the wheels that will not be lifted.

Image 4.1: The VEVOR Air Jack disassembled into its main components, including the airbag unit, handle, and control valve, illustrating its compact size for storage and ease of assembly.

ചിത്രം 4.2: ഒരു ഓവർഹെഡ് view of the VEVOR Air Jack components laid out, demonstrating its compact design and the parts required for assembly and operation.

5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Follow these steps for safe and effective operation of your VEVOR Pneumatic Air Jack:

5.1. Lifting the Vehicle

1. ജാക്ക് സ്ഥാപിക്കുക: Roll the air jack under the vehicle, ensuring the thickened rubber pad is centered directly under a strong, load-bearing point of the vehicle's frame or designated jacking point.
2. Close Red Valve: Ensure the red air release valve is fully closed.
3. Open Green Valve: Slowly open the green air inlet valve to allow compressed air to enter the airbags. The jack will begin to inflate and lift the vehicle.
4. Monitor Lifting: Continuously monitor the lifting process, ensuring the vehicle remains stable and the jack is not shifting.
5. ആവശ്യമുള്ള ഉയരത്തിൽ എത്തുക: Once the vehicle reaches the desired height, close the green air inlet valve completely.
6. ജാക്ക് സ്റ്റാൻഡുകൾ ഉപയോഗിച്ച് സുരക്ഷിതമാക്കുക: Immediately place appropriate jack stands under the vehicle's designated support points. Lower the vehicle onto the jack stands by slightly opening the red valve until the vehicle rests securely on the stands.

5.2. വാഹനം താഴ്ത്തുന്നു

1. ചെറുതായി ഉയർത്തുക: If the vehicle is on jack stands, use the air jack to lift the vehicle slightly off the jack stands.
2. ജാക്ക് സ്റ്റാൻഡുകൾ നീക്കം ചെയ്യുക: വാഹനത്തിനടിയിൽ നിന്ന് ജാക്ക് സ്റ്റാൻഡുകൾ ശ്രദ്ധാപൂർവ്വം നീക്കം ചെയ്യുക.
3. Open Red Valve: Slowly open the red air release valve to gradually deflate the airbags and lower the vehicle. Control the rate of descent by adjusting how much the valve is opened.
4. Fully Lower: Continue to lower the vehicle until it is fully on the ground.
5. ജാക്ക് നീക്കം ചെയ്യുക: Once the vehicle is fully lowered and stable, remove the air jack.

Image 5.1: A visual guide to the effortless operation of the VEVOR Air Jack, showing the three steps: 1. Close red valve, open green valve to inflate. 2. Turn off green valve when inflated. 3. Open red valve to bleed air and lower.

Image 5.2: A comparison showing the VEVOR Air Jack before inflation (compact) and after inflation (extended), illustrating the rapid lifting capability within 5 seconds.

Image 5.3: An illustration detailing the minimum height (6.3 inches / 16 cm) and maximum height (15.75 inches / 40 cm) of the VEVOR Air Jack, along with arrows indicating the lifting motion.

6. പരിപാലനം

Regular maintenance ensures the longevity and safe operation of your VEVOR Pneumatic Air Jack:

• വൃത്തിയാക്കൽ: After each use, wipe down the jack with a clean, dry cloth to remove dirt, grease, and debris. Avoid using harsh chemicals that could damage rubber components.
• പരിശോധന: Periodically inspect the airbags for cuts, punctures, or signs of wear. Check all connections, hoses, and valves for leaks or damage. Ensure the handle and wheels are securely attached and functioning correctly.
• എയർ സപ്ലൈ: Ensure your air compressor system includes a moisture trap to prevent water from entering the jack, which can cause internal corrosion.
• സംഭരണം: Store the air jack in a clean, dry place, away from direct sunlight and extreme temperatures. Ensure it is fully deflated before storage.
• ലൂബ്രിക്കേഷൻ: Lightly lubricate moving parts, such as wheel axles, if necessary, with a suitable lubricant.

7. പ്രശ്‌നപരിഹാരം

പൊതുവായ പ്രശ്നങ്ങളും അവയുടെ പരിഹാരങ്ങളും അറിയാൻ താഴെ കൊടുത്തിരിക്കുന്ന പട്ടിക കാണുക:

ഇവിടെ പട്ടികപ്പെടുത്തിയിട്ടില്ലാത്ത പ്രശ്നങ്ങൾ നേരിടുന്നുണ്ടെങ്കിലോ നിർദ്ദേശിച്ച പരിഹാരങ്ങൾ പ്രശ്നം പരിഹരിക്കുന്നില്ലെങ്കിലോ, ദയവായി VEVOR ഉപഭോക്തൃ പിന്തുണയുമായി ബന്ധപ്പെടുക.

8 സ്പെസിഫിക്കേഷനുകൾ

Technical specifications for the VEVOR 5T Pneumatic Air Jack:

Image 8.1: A visual representation of the VEVOR Air Jack with key dimensions (height, width, length) and product weight, alongside examples of compatible vehicles.

9. വാറൻ്റിയും പിന്തുണയും

VEVOR products are designed for durability and performance. This product comes with a standard manufacturer's warranty against defects in materials and workmanship. For specific warranty details, including duration and coverage, please refer to the warranty card included with your product or visit the official VEVOR webസൈറ്റ്.

For technical assistance, troubleshooting, or to inquire about replacement parts, please contact VEVOR customer support through their official website or the contact information provided in your product packaging. When contacting support, please have your product model number (Cric Pneumatico ad Aria) and ASIN (B08HLRYM7L) ready.