CASIO G-Shock AWR-M100SDC-1A Instruction Manual

ആമുഖം

This manual provides detailed instructions for the proper use and care of your CASIO G-Shock AWR-M100SDC-1A watch. This timepiece features a shock-resistant construction, 20 ATM water resistance, and Tough Solar power, combining analog and digital displays for versatile functionality.

ചിത്രം: മുൻഭാഗം view of the CASIO G-Shock AWR-M100SDC-1A watch, showcasing its black case, band, and dial with lime green accents and analog-digital display.

സജ്ജമാക്കുക

പ്രാരംഭ ചാർജിംഗ്

Your watch is equipped with Tough Solar technology, which converts light into power. Before initial use, expose the watch face to bright light for several hours to ensure a full charge. Avoid blocking the watch face from light for extended periods to maintain optimal performance.

സമയവും തീയതിയും ക്രമീകരണം

The watch automatically receives time calibration signals in certain regions. If manual adjustment is needed or if you are outside a signal reception area, refer to the 'Operating' section for detailed instructions on setting the home city, time, and date. Ensure your home city is correctly set for accurate timekeeping and world time functions.

പ്രവർത്തിക്കുന്നു

ചിത്രം: വശം view of the CASIO G-Shock AWR-M100SDC-1A watch, highlighting the buttons on the left and right sides of the case, used for mode selection and adjustments.

മോഡ് നാവിഗേഷൻ

അമർത്തുക മോഡ് button (typically bottom left) to cycle through the watch's various modes: Timekeeping, World Time, Stopwatch, Countdown Timer, and Alarm. The current mode will be indicated on the digital display.

ലോക സമയം

വേൾഡ് ടൈം മോഡിൽ, നിങ്ങൾക്ക് കഴിയും view the current time in 31 time zones (48 cities + Coordinated Universal Time). Use the മുന്നോട്ട് ഒപ്പം റിവേഴ്സ് buttons (typically top right and bottom right) to scroll through cities. To swap your Home City and World Time City, press and hold the appropriate button as indicated in the watch's on-screen prompts.

സ്റ്റോപ്പ് വാച്ച്

The 1/100 second stopwatch measures elapsed time, split times, and two finishes. In Stopwatch mode, press the ആരംഭിക്കുക/നിർത്തുക button (usually top right) to begin and end timing. Press the പുനഃസജ്ജമാക്കുക button (usually bottom right) to clear the measurement.

കൗണ്ട്ഡൗൺ ടൈമർ

The countdown timer can be set for durations up to 24 hours. In Countdown Timer mode, use the adjustment buttons to set the desired countdown start time. Press the ആരംഭിക്കുക/നിർത്തുക button to begin and pause the countdown. An alarm will sound when the countdown reaches zero.

അലാറങ്ങൾ

The watch features 5 daily alarms and an hourly time signal. In Alarm mode, select an alarm number and use the adjustment buttons to set the alarm time. Activate or deactivate alarms as needed. The hourly time signal will beep every hour on the hour when enabled.

Full Auto LED Light

The full auto LED light illuminates the display for easy reading in low light conditions. The light activates automatically when the watch is tilted towards your face in dim environments. This feature can be enabled or disabled through the watch settings.

Hand Shift Function

If the analog hands obstruct the digital display, the hand shift function allows you to temporarily move them out of the way. Refer to the watch's on-screen prompts or specific button combinations to activate and deactivate this function.

മെയിൻ്റനൻസ്

ജല പ്രതിരോധം (20 ATM)

Your watch is water resistant to 20 ATM (200 meters), suitable for swimming, showering, and snorkeling. വെള്ളത്തിനടിയിൽ ബട്ടണുകൾ പ്രവർത്തിപ്പിക്കരുത്. Avoid exposing the watch to hot water or steam, as this can compromise the seals. After exposure to saltwater, rinse the watch with fresh water and wipe it dry.

വൃത്തിയാക്കൽ

Wipe the watch case and band with a soft, dry cloth to remove dirt and moisture. For stubborn dirt, use a soft cloth dampened with a mild soap solution, then wipe dry. Avoid using chemical cleaners or solvents, as these can damage the resin materials.

Solar Cell Care

To ensure continuous operation, regularly expose the watch face to light. Avoid storing the watch in dark places for extended periods. If the charge level becomes low, the watch's functions may be limited. A full charge can take several hours under direct sunlight or longer under fluorescent light.

ഷോക്ക് റെസിസ്റ്റൻസ്

While designed to be shock-resistant, avoid subjecting the watch to excessive impacts or vibrations, which could potentially damage internal components.

ട്രബിൾഷൂട്ടിംഗ്

സമയ കൃത്യതയില്ലായ്മ

• ചാർജ് ലെവൽ പരിശോധിക്കുക: Ensure the watch is sufficiently charged by exposing it to light. Low charge can affect timekeeping accuracy.
• ഹോം സിറ്റി ക്രമീകരണം: Verify that your Home City is correctly set, especially if you rely on automatic time calibration.
• മാനുവൽ അഡ്ജസ്റ്റ്മെൻ്റ്: If automatic calibration is unavailable or unsuccessful, manually adjust the time and date as described in the 'Operating' section.

Digital Display Blank or Dim

• This typically indicates a low battery charge. Expose the watch to bright light for an extended period to recharge.
• Ensure the Power Saving function (if enabled) is not causing the display to go blank in darkness.

ബട്ടണുകൾ പ്രതികരിക്കുന്നില്ല

• വാച്ച് ലോക്ക് ചെയ്ത മോഡിലല്ലെന്ന് ഉറപ്പാക്കുക (ബാധകമെങ്കിൽ).
• ബട്ടണുകളെ തടസ്സപ്പെടുത്തുന്ന ഏതെങ്കിലും അവശിഷ്ടങ്ങളോ വിദേശ വസ്തുക്കളോ പരിശോധിക്കുക.
• If the watch has been exposed to water, ensure it is completely dry before attempting to operate buttons.

സ്പെസിഫിക്കേഷനുകൾ

ചിത്രം: പിന്നിലേക്ക് view of the CASIO G-Shock AWR-M100SDC-1A watch, showing the stainless steel case back with engraved model information and the resin band.

വാറൻ്റിയും പിന്തുണയും

For warranty information, service, or technical support, please refer to the warranty card included with your purchase or visit the official CASIO website. Contact details for customer service are typically provided on the manufacturer's support pages.