ആമുഖം
The Aquacomputer High Flow 2 G1/4 Flow Sensor is designed for integration into liquid cooling systems to provide continuous flow rate measurement and coolant temperature monitoring. This manual provides instructions for proper installation, operation, and maintenance of the device.
ഉൽപ്പന്നം കഴിഞ്ഞുview
Image: The Aquacomputer High Flow 2 G1/4 Flow Sensor, featuring a black acetal housing with a brushed stainless steel top plate. The top plate is engraved with "highflow 2 FLOW SENSOR" and "made in germany". The sensor has G1/4 connection threads on its sides.
The High Flow 2 sensor measures liquid flow using a rotor/impeller system. Its rotation speed is detected contact-free via a magnetic system. The sensor also integrates a precise water temperature sensor. Its compact design and symmetrical structure allow for flexible installation without specific flow direction requirements.
സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
- തയ്യാറാക്കൽ: Ensure your liquid cooling system is drained and depressurized before installation.
- മൗണ്ടിംഗ്: The sensor features three M3 threads in its base for secure attachment. Use the included M3 screws to mount the sensor to a stable surface within your system.
- Integration into Cooling Circuit: The sensor has G1/4 connection threads. Integrate it into your cooling loop using appropriate G1/4 fittings and tubing. The sensor's symmetrical design allows for integration without considering the direction of flow. It can also be operated in any installation position.
- ഇലക്ട്രിക്കൽ കണക്ഷൻ: Connect the sensor's 3-pin power connector to a compatible device with a flow sensor input. കുറിപ്പ്: A separate device with a flow sensor input is required to evaluate the flow signal and is not included with this sensor.
- ചോർച്ച പരിശോധന: After installation, refill your cooling system and perform a thorough leak test before powering on your computer.
പ്രവർത്തന നിർദ്ദേശങ്ങൾ
Once installed and connected to a compatible monitoring device, the Aquacomputer High Flow 2 sensor will continuously measure the flow rate and coolant temperature. The sensor provides reliable measurements within a range of approximately 35 l/h to 1000 l/h.
- Flow Rate Measurement: The internal rotor/impeller is driven by the coolant. The rotation speed is converted into a flow rate signal.
- താപനില അളക്കൽ: The integrated temperature sensor provides real-time coolant temperature data.
- ഡാറ്റ വ്യാഖ്യാനം: Refer to the instruction manual of your connected monitoring device for details on how to interpret and display the flow and temperature data.
മെയിൻ്റനൻസ്
The Aquacomputer High Flow 2 sensor is designed for low maintenance. Regular checks of your cooling system are recommended.
- വൃത്തിയാക്കൽ: If the sensor requires cleaning, ensure the cooling system is drained. The stainless steel cover is magnetically attached and can be removed without tools for access to the internal components. Clean with distilled water and a soft brush if necessary. Avoid abrasive materials or harsh chemicals.
- ദ്രാവക ഗുണനിലവാരം: Use high-quality coolants specifically designed for computer liquid cooling systems to prevent buildup and ensure optimal sensor performance.
ട്രബിൾഷൂട്ടിംഗ്
- No Flow Reading:
- Check electrical connection to the monitoring device.
- Ensure the pump in your cooling system is operating correctly and coolant is flowing.
- Verify that the monitoring device is configured correctly for the flow sensor input.
- Inspect the sensor for any obstructions or debris that might impede the impeller's rotation.
- കൃത്യമല്ലാത്ത വായനകൾ:
- Ensure the sensor is installed correctly and there are no air bubbles trapped within the sensor housing.
- Confirm the flow rate is within the sensor's specified operating range (35 l/h to 1000 l/h).
- Consult the manual of your monitoring device for calibration options.
സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | വിശദാംശങ്ങൾ |
|---|---|
| മോഡൽ നമ്പർ | 53292 |
| Connection Threads | G1/4 |
| ഫ്ലോ റേറ്റ് റേഞ്ച് | Approx. 35 l/h to 1000 l/h |
| സംയോജിത സെൻസറുകൾ | Flow sensor, Water temperature sensor |
| മെറ്റീരിയൽ | Acetal housing, Stainless steel cover |
| മൗണ്ടിംഗ് | 3x M3 threads in base (screws included) |
| പവർ കണക്റ്റർ തരം | 3-പിൻ |
| തണുപ്പിക്കൽ രീതി | വെള്ളം |
| അനുയോജ്യമായ ഉപകരണങ്ങൾ | Desktop, Radiator (within a liquid cooling loop) |
വാറൻ്റി വിവരങ്ങൾ
For warranty details, please refer to the official Aquacomputer webനിങ്ങളുടെ വാങ്ങൽ കേന്ദ്രത്തിന്റെ സൈറ്റിൽ ബന്ധപ്പെടുക അല്ലെങ്കിൽ ബന്ധപ്പെടുക. വാറന്റി ക്ലെയിമുകൾക്കായി നിങ്ങളുടെ വാങ്ങിയതിന്റെ തെളിവ് സൂക്ഷിക്കുക.
പിന്തുണ
For technical assistance or further inquiries, please visit the Aquacomputer official website or contact their customer support. Ensure you have your product model number (53292) available when seeking support.
ഉദ്യോഗസ്ഥൻ Webസൈറ്റ്: www.aquacomputer.de