Faber Hood Zenith FL SC AC BK 60 Chimney User Manual

1. ഉൽപ്പന്നം കഴിഞ്ഞുview

The Faber Hood Zenith FL SC AC BK 60 is a 60 cm wall-mounted angular kitchen chimney designed for efficient smoke and odor extraction. It features filterless technology, auto-clean function, and touch & gesture controls for ease of use.

ചിത്രം: മുൻഭാഗം view of the Faber Hood Zenith FL SC AC BK 60 Chimney, showcasing its sleek black finish and angular design.

2. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

2.1 അളവുകൾ

Ensure adequate space for installation. The chimney dimensions are 37 cm (Depth) x 60 cm (Width) x 98 cm (Height).

Image: Diagram illustrating the dimensions of the Faber Hood Zenith FL SC AC BK 60 Chimney, showing 37cm depth, 60cm width, and 98cm height.

2.2 മൗണ്ടിംഗ്

This is a wall-mounted chimney. Professional installation is recommended to ensure proper and secure mounting. The chimney should be installed directly above the cooking range, maintaining the recommended distance as per local safety standards and manufacturer guidelines.

2.3 ഇലക്ട്രിക്കൽ കണക്ഷൻ

The chimney operates on a single-phase power supply with a requirement of 180 Volts. Ensure the electrical outlet is properly grounded and meets the specified voltagഇ ആവശ്യകതകൾ.

3. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

3.1 നിയന്ത്രണ പാനൽ

The chimney features a touch and gesture control panel. The panel allows you to power on/off, adjust suction speed, and control the LED lighting.

ചിത്രം: ക്ലോസ്-അപ്പ് view of the touch and gesture control panel on the Faber Hood Zenith FL SC AC BK 60 Chimney, showing icons for power, speed settings (1, 2, 3), light, and auto-clean.

3.2 Suction Speeds

The chimney offers 3 speed settings to adjust the suction power according to your cooking needs. Higher speeds are suitable for heavy frying or grilling, while lower speeds are for lighter cooking.

3.3 LED ലൈറ്റിംഗ്

The chimney is equipped with 2 x 1.5 watts LED lamps to illuminate your cooking area. These can be turned on or off independently using the control panel.

3.4 ഓട്ടോ ക്ലീൻ ഫംഗ്ഷൻ

The heat auto-clean function helps in maintaining the chimney's internal components by melting and collecting oil and grease particles. Refer to the control panel for initiating the auto-clean cycle.

Image: Visual representation of key features including Motion Sensor, Auto Clean, Filterless Technology, and Suction Power of the Faber Hood Zenith FL SC AC BK 60 Chimney.

4. പരിപാലനം

4.1 Filterless Technology

This chimney utilizes filterless technology, which means it does not have traditional filters that require frequent cleaning or replacement. Instead, it uses an airflow angle to separate grease and oil, directing them into a collection tray.

4.2 Grease Collection Tray

Regularly check and empty the grease collection tray. The frequency depends on your cooking habits. To clean, carefully remove the tray, dispose of the collected grease, and wash the tray with mild detergent and water. Ensure it is completely dry before reinserting.

4.3 ബാഹ്യ ശുചീകരണം

Clean the exterior surfaces of the chimney with a soft cloth and a mild, non-abrasive cleaning solution. Avoid using harsh chemicals or abrasive materials that could damage the finish. Ensure the chimney is turned off and unplugged before cleaning.

5. പ്രശ്‌നപരിഹാരം

If you encounter any issues with your Faber chimney, refer to the following common troubleshooting steps:

• Chimney not turning on: Check if the power cord is securely plugged into a functional outlet. Verify the circuit breaker has not tripped.
• കുറഞ്ഞ സക്ഷൻ പവർ: Ensure the grease collection tray is not full. Check for any obstructions in the ducting system.
• അസാധാരണമായ ശബ്ദം: Confirm that all components are securely fastened. If the noise persists, contact customer support.
• ലൈറ്റുകൾ പ്രവർത്തിക്കുന്നില്ല: Check if the LED light function is activated on the control panel. If not, the LED lamps may require replacement by a qualified technician.

For issues not resolved by these steps, please contact Faber customer support.

6 സ്പെസിഫിക്കേഷനുകൾ

7. വാറൻ്റിയും പിന്തുണയും

7.1 വാറൻ്റി വിവരങ്ങൾ

The Faber Hood Zenith FL SC AC BK 60 Chimney comes with a ഉൽപ്പന്നത്തിന് 1 വർഷത്തെ വാറന്റി കൂടാതെ എ മോട്ടോറിന് 5 വർഷത്തെ വാറന്റി വാങ്ങിയ തീയതി മുതൽ. വാറന്റി ക്ലെയിമുകൾക്കായി നിങ്ങളുടെ വാങ്ങൽ രസീത് സൂക്ഷിക്കുക.

7.2 ഉപഭോക്തൃ പിന്തുണ

For any service requests, technical assistance, or warranty claims, please contact Faber customer support. You can find their contact information on the official Faber webസൈറ്റ് അല്ലെങ്കിൽ നിങ്ങളുടെ ഉൽപ്പന്ന ഡോക്യുമെന്റേഷൻ.

Manufacturer: Faber, Franke Faber India Pvt Ltd

കൂടുതൽ വിവരങ്ങൾക്ക്, ഉദ്യോഗസ്ഥനെ സന്ദർശിക്കുക Faber India webസൈറ്റ്.