CallToU CC01-DS04

CallToU Wireless Door/Window Sensor Chime

Model: CC01-DS04

ഇൻസ്ട്രക്ഷൻ മാനുവൽ

1. ആമുഖവും അവസാനവുംview

The CallToU Wireless Door/Window Sensor Chime (Model CC01-DS04) is a versatile security and alert system designed to notify you when a door or window is opened. It consists of a receiver unit and a magnetic sensor. When the magnetic sensor detects an opening, it wirelessly transmits a signal to the receiver, which then sounds an alarm or chime.

This system is suitable for various applications, including:

  • ഹോം സെക്യൂരിറ്റി: Detects unauthorized entry through doors or windows.
  • കുട്ടികളുടെ സുരക്ഷ: Alerts you if children open restricted doors or windows.
  • വളർത്തുമൃഗ നിരീക്ഷണം: Notifies you if pets open doors or gates.
  • Customer Alert: Functions as a welcome chime for retail stores or offices.
CallToU Wireless Door/Window Sensor Chime components: receiver and magnetic sensor.

Figure 1: CallToU Wireless Door/Window Sensor Chime system overview.

2. പാക്കേജ് ഉള്ളടക്കം

എല്ലാ ഇനങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കാൻ പാക്കേജ് പരിശോധിക്കുക:

  • 1 x റിസീവർ യൂണിറ്റ്
  • 1 x Magnetic Sensor (Transmitter)
  • 1 x ഇൻസ്ട്രക്ഷൻ മാനുവൽ
  • Mounting Accessories (Double-sided tape, screws)
  • 1 x 12V 23A Alkaline Battery (pre-installed in transmitter)

3. ഉൽപ്പന്ന സവിശേഷതകൾ

  • ക്രമീകരിക്കാവുന്ന വോളിയം: 5 levels of volume adjustment, ranging from 0dB (silent) to 110dB.
  • ഒന്നിലധികം മെലഡികൾ: 55 selectable chime melodies.
  • LED സൂചകം: Visual alert with LED flashing.
  • വിപുലീകരിച്ച ശ്രേണി: Up to 200 meters (650 feet) in open areas, and up to 80 meters (260 feet) indoors.
  • നീണ്ട ബാറ്ററി ലൈഫ്: Magnetic sensor battery lasts for approximately 13,000 triggers (about 8 months with 50 uses per day).
  • എളുപ്പമുള്ള ഇൻസ്റ്റാളേഷൻ: Wireless design with no complex wiring required.
  • വികസിപ്പിക്കാവുന്ന സിസ്റ്റം: One receiver can pair with up to 30 transmitter sensors.
Receiver unit showing volume and melody selection buttons, and LED indicator.

Figure 2: Receiver features including 55 melodies and 5 volume levels.

4. സജ്ജീകരണ നിർദ്ദേശങ്ങൾ

4.1 ഘടകങ്ങൾ കഴിഞ്ഞുview

Diagram showing the receiver with plug, speaker, volume/navigation buttons, and the door/window magnetic sensor.

ചിത്രം 3: വിശദമായി view of receiver and magnetic sensor components.

4.2 പ്രാരംഭ സജ്ജീകരണവും ജോടിയാക്കലും

  1. Power On the Receiver: Plug the receiver unit into a standard electrical outlet. The receiver will power on and be ready for pairing.
    2. Image showing the receiver being plugged into an electrical outlet.

    Figure 4: Plug the receiver into an outlet.

  2. Select Melody: Press the 'Up' or 'Down' buttons on the side of the receiver to cycle through the 55 available melodies. Select your preferred chime sound.
    3. Image showing a hand pressing the melody selection button on the receiver.

    Figure 5: Select your desired melody.

  3. ജോടിയാക്കൽ മോഡ് നൽകുക: Press and hold the volume button on the side of the receiver for approximately 5 seconds until you hear a "ding-dong" sound and the blue LED light flashes. This indicates the receiver is in pairing mode.
    4. Image showing a hand pressing the volume button to enter pairing mode.

    Figure 6: Enter pairing mode by holding the volume button.

  4. Activate Magnetic Sensor: Separate the two parts of the magnetic sensor by more than 1.5 cm (0.6 inches). The receiver will emit the selected chime sound and its LED will flash, indicating successful pairing.

    5. Video 1: Demonstrates the door sensor setup method, including powering on, selecting a melody, entering pairing mode, and activating the magnetic sensor for successful pairing.

  5. സെൻസർ മൌണ്ട് ചെയ്യുക: Use the provided double-sided tape or screws to attach the magnetic sensor to your desired door or window frame. Ensure the two parts of the sensor are aligned and within 1.5 cm (0.6 inches) of each other when the door/window is closed.
    6. Diagram showing the two parts of the magnetic sensor installed on a door frame, with a red line indicating the separation that triggers the signal.

    Figure 7: Proper installation of the magnetic sensor on a door or window.

    Step-by-step visual guide for installing the magnetic sensor and pairing it with the receiver.

    Figure 8: Visual guide for the setup and pairing process.

5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

  1. അലാറം ട്രിഗർ ചെയ്യുന്നു: When the magnetic sensor's two parts separate (e.g., a door or window opens), the sensor will send a signal to the paired receiver.
  2. Receiver Alert: The receiver will sound the selected melody and its LED light will flash, alerting you to the opening.
  3. വോളിയം ക്രമീകരണം: Press the volume button on the receiver to adjust the sound level through 5 different settings.
  4. മെലഡി തിരഞ്ഞെടുക്കൽ: Use the 'Up' and 'Down' buttons on the receiver to change the chime melody.
Illustrations of various use cases for the door sensor: child safety, pet escape prevention, family entry notification, and customer arrival alert in a shop.

ചിത്രം 9: ഉദാamples of how the door sensor chime can be used in different scenarios.

6. പരിപാലനം

6.1 Battery Replacement (Magnetic Sensor)

The magnetic sensor is powered by a 12V 23A alkaline battery. When the battery is low, the sensor's indicator light may flash or the transmission range may decrease. Replace the battery as follows:

  1. Carefully pry open the magnetic sensor casing using a small screwdriver.
  2. പഴയ 12V 23A ബാറ്ററി നീക്കം ചെയ്യുക.
  3. Insert a new 12V 23A alkaline battery, ensuring correct polarity.
  4. സെൻസർ c അടയ്ക്കുകasinഗ്രാം സുരക്ഷിതമായി.

Video 2: Detailed instructions on how to replace the battery in the door sensor.

Diagram showing the steps to replace the 12V 23A battery in the magnetic sensor.

Figure 10: Visual guide for magnetic sensor battery replacement.

6.2 വൃത്തിയാക്കൽ

മൃദുവായതും ഉണങ്ങിയതുമായ തുണി ഉപയോഗിച്ച് യൂണിറ്റുകൾ തുടയ്ക്കുക. അബ്രാസീവ് ക്ലീനറുകളോ ലായകങ്ങളോ ഉപയോഗിക്കരുത്.

7. പ്രശ്‌നപരിഹാരം

പ്രശ്നംസാധ്യമായ കാരണംപരിഹാരം
Receiver does not chime when sensor is triggered.1. Sensor and receiver are not paired.
2. Sensor battery is low or dead.
3. Sensor and receiver are out of range.
4. Obstructions between sensor and receiver.		1. Re-pair the sensor and receiver (refer to Section 4.2).
2. Replace the sensor battery (refer to Section 6.1).
3. Move the receiver closer to the sensor.
4. Reduce obstructions or reposition units.
Chime sound is too low or too loud.വോളിയം ക്രമീകരണം തെറ്റാണ്.റിസീവറിലെ വോളിയം ബട്ടൺ ഉപയോഗിച്ച് വോളിയം ക്രമീകരിക്കുക.
തെറ്റായ അലാറങ്ങൾ.Magnetic sensor parts are too far apart or misaligned.Ensure the magnetic sensor parts are within 1.5 cm (0.6 inches) when the door/window is closed and are properly aligned.

8 സ്പെസിഫിക്കേഷനുകൾ

  • ബ്രാൻഡ്: CallToU
  • മോഡൽ: CC01-DS04
  • നിറം: കറുപ്പ്
  • റിസീവർ അളവുകൾ: 8.17 x 8.17 x 3 സെ.മീ (ഏകദേശം 3.22 x 3.22 x 1.18 ഇഞ്ച്)
  • Magnetic Sensor Dimensions: 9.5 x 9 x 9 cm (overall product dimension, specific sensor dimensions not provided but implied to be smaller)
  • ഊർജ്ജ സ്രോതസ്സ്: Receiver: AC Plug-in; Transmitter: 1 x 12V 23A Alkaline Battery (included)
  • വയർലെസ് ശ്രേണി: Up to 200 meters (650 feet) outdoors (line of sight), up to 80 meters (260 feet) indoors
  • വോളിയം ലെവലുകൾ: 5 (0-110dB)
  • മെലഡികൾ: 55 തിരഞ്ഞെടുക്കാവുന്നതാണ്
  • സെൻസർ ടെക്നോളജി: Contact Sensor (Magnetic)
  • UPC: 779584902443
Diagram showing the dimensions of the receiver and magnetic sensor in inches.

ചിത്രം 11: ഉൽപ്പന്ന അളവുകൾ.

9. വാറൻ്റിയും പിന്തുണയും

This CallToU product comes with a 1 വർഷത്തെ ഗുണനിലവാര വാറന്റി. If you encounter any issues or have questions regarding the product during use, please contact CallToU customer support through Amazon's order details page. We are committed to providing prompt assistance and replacements if necessary.

For further assistance, please refer to the contact information provided with your purchase or visit the official CallToU brand store on Amazon.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.