1. ആമുഖം
Thank you for choosing the AmmToo LED Motion Sensor Night Light. This manual provides essential information for the safe and efficient use of your new night lights. Designed for convenience and energy efficiency, these lights offer warm white illumination and automatic activation based on motion detection in low-light conditions.
2. ഉൽപ്പന്ന സവിശേഷതകൾ
- ഊഷ്മള വെളുത്ത പ്രകാശം: Provides a soft, non-glaring light (3200K - 2800K) for comfortable visibility in the dark.
- പിഐആർ മോഷൻ സെൻസർ: Automatically detects movement within a 3-meter range and 120-degree angle.
- സ്വയമേവ ഓൺ/ഓഫ്: Lights turn on when motion is detected in darkness and turn off after 30 seconds of no movement.
- ലൈറ്റ് സെൻസർ: Ensures the light only activates in dark conditions, saving energy during the day.
- ഊർജ്ജ കാര്യക്ഷമത: Low power consumption of 0.5W, powered by 3 AAA batteries (not included).
- ദീർഘായുസ്സ്: LED lifespan of up to 50,000 hours.
- ഒതുക്കമുള്ള & പോർട്ടബിൾ ഡിസൈൻ: Slim and lightweight, suitable for various indoor locations.
- എളുപ്പമുള്ള ഇൻസ്റ്റാളേഷൻ: Mounts easily with double-sided adhesive tape, no tools required.
3. പാക്കേജ് ഉള്ളടക്കം
The AmmToo LED Motion Sensor Night Light package includes:
- 4 x AmmToo LED Motion Sensor Night Lights
- 4 x ഇരട്ട-വശങ്ങളുള്ള പശ പാഡുകൾ
- 1 x ഉപയോക്തൃ മാനുവൽ (ഈ പ്രമാണം)

Image: Four AmmToo LED Motion Sensor Night Lights, showing the compact design and integrated motion sensor.

Image: The complete package contents, including four night lights, adhesive mounting pads, and the instruction manual.
4. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
Follow these steps to set up and install your AmmToo LED Motion Sensor Night Light:
- ബാറ്ററികൾ ചേർക്കുക:
- Gently slide the back cover of the night light to open it.
- Insert 3 AAA batteries (not included) into the battery compartment, ensuring correct polarity (+/-).
- പിൻ കവർ സുരക്ഷിതമായി അടയ്ക്കുക.

Image: A visual guide demonstrating how to open the back cover, insert 3 AAA batteries, apply the adhesive, and mount the light.
- ഇൻസ്റ്റലേഷൻ ലൊക്കേഷൻ തിരഞ്ഞെടുക്കുക:
- Select a smooth, clean, and dry surface for mounting.
- Consider areas where you need light in the dark, such as hallways, staircases, bathrooms, bedrooms, or inside cabinets.
- പശ പാഡ് ഘടിപ്പിക്കുക:
- Peel off one side of the double-sided adhesive pad.
- Firmly attach it to the back of the night light.

Image: A hand applying the circular 3M adhesive pad to the back of the night light, preparing it for mounting.
- വെളിച്ചം മൌണ്ട് ചെയ്യുക:
- Peel off the other side of the adhesive pad.
- Press the night light firmly onto the chosen surface for at least 30 seconds to ensure a strong bond.
No screws or tools are required for installation.
5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ
The AmmToo LED Motion Sensor Night Light operates automatically:
- യാന്ത്രിക സജീവമാക്കൽ: The built-in light sensor detects ambient light levels. The motion sensor will only become active when the environment is dark.
- ചലനം കണ്ടെത്തൽ: When motion is detected within a 3-meter (10 feet) range and a 120-degree angle in a dark environment, the night light will automatically turn on.
- യാന്ത്രിക നിർജ്ജീവമാക്കൽ: If no further motion is detected for approximately 30 seconds, the night light will automatically turn off to conserve battery life.

Image: A diagram illustrating the automatic illumination feature, showing the light activating only in darkness upon motion detection and turning off after 30 seconds.

Image: A three-panel image demonstrating the light sensor preventing activation in daylight, auto-on by motion sensor in darkness, and auto-off after 20 seconds of no motion.
6. പരിപാലനം
- ബാറ്ററി മാറ്റിസ്ഥാപിക്കൽ: When the light dims or stops functioning, it's time to replace the batteries. Open the back cover, remove the old AAA batteries, and insert new ones, observing polarity.
- വൃത്തിയാക്കൽ: നൈറ്റ് ലൈറ്റിന്റെ പ്രതലം മൃദുവായതും ഉണങ്ങിയതുമായ തുണി ഉപയോഗിച്ച് തുടയ്ക്കുക. അബ്രാസീവ് ക്ലീനറുകൾ ഉപയോഗിക്കരുത് അല്ലെങ്കിൽ ഉപകരണം വെള്ളത്തിൽ മുക്കരുത്.
- സംഭരണം: If storing the night lights for an extended period, remove the batteries to prevent leakage.
7. പ്രശ്നപരിഹാരം
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| ലൈറ്റ് ഓണാക്കില്ല. |
|
|
| വെളിച്ചം നിരന്തരം കത്തിക്കൊണ്ടിരിക്കുന്നു. |
|
|
| Motion detection is inconsistent. |
|
|
| Adhesive not holding. |
|
|
8 സ്പെസിഫിക്കേഷനുകൾ
| ബ്രാൻഡ്: | AmmToo |
| മോഡൽ നമ്പർ: | ZN01 |
| അളവുകൾ (L x W x H): | 6.4 x 4.4 x 2.7 സെ.മീ (2.52 x 1.73 x 1.06 ഇഞ്ച്) |
| ഭാരം: | 120 g (per light) |
| ഊർജ്ജ സ്രോതസ്സ്: | 3 x AAA ബാറ്ററികൾ (ഉൾപ്പെടുത്തിയിട്ടില്ല) |
| വൈദ്യുതി ഉപഭോഗം: | 0.5 W |
| ഇളം നിറം: | Warm White (3200K - 2800K) |
| സെൻസർ തരം: | PIR Motion Sensor, Light Sensor |
| കണ്ടെത്തൽ പരിധി: | 3 മീറ്റർ വരെ (10 അടി) |
| കണ്ടെത്തൽ ആംഗിൾ: | 120 ഡിഗ്രി |
| Auto-off Time: | Approx. 30 seconds after last motion detected |
| ജീവിതകാലയളവ്: | 50,000 മണിക്കൂർ വരെ |
| മെറ്റീരിയൽ: | അക്രിലോണിട്രൈൽ ബ്യൂട്ടാഡീൻ സ്റ്റൈറൈൻ (എബിഎസ്) |
| ഇൻസ്റ്റലേഷൻ തരം: | Wall Mount (adhesive) |
9. വാറണ്ടിയും പിന്തുണയും
Specific warranty information is not provided in the product details. For any product inquiries, technical support, or warranty claims, please refer to the retailer or contact AmmToo customer service through their official channels.
Please retain your purchase receipt for any warranty-related issues.