ഉൽപ്പന്നം കഴിഞ്ഞുview
The Thule Bike Protector is an accessory designed to provide additional protection for bicycles when they are transported or stored in close proximity, such as on a bike rack. It prevents direct contact between bike frames and components, minimizing the risk of dents and scratches.
പ്രധാന സവിശേഷതകൾ:
- ബഹുമുഖ ഫിറ്റ്: Designed to accommodate various bike frame geometries.
- എളുപ്പത്തിലുള്ള ക്രമീകരണം: Features an adjustable design with no loose parts, simplifying installation and removal.
- Contact Prevention: Utilizes a rubber spacer to create separation between potential contact points.
- സുരക്ഷിത ഫിക്സേഷൻ: Includes a sturdy strap to secure bikes together, further preventing movement and contact.
- വിവിധോദ്ദേശ്യ ഉപയോഗം: Suitable for transportation, parking, and storage scenarios.
സജ്ജീകരണ നിർദ്ദേശങ്ങൾ
Follow these steps to properly install the Thule Bike Protector to ensure maximum protection for your bicycles.
- Identify Contact Points: Before placing bikes on a rack or in storage, identify areas where bike frames, handlebars, pedals, or other components might come into contact with each other.
- Position the Protector: Place the rubber spacer component of the Thule Bike Protector between the identified contact points. Ensure the spacer is firmly seated to create a buffer.
- Secure with Strap: Wrap the integrated sturdy strap around the bike frames or components that need to be held together. Pull the strap taut and secure it to prevent movement. The strap should be tight enough to hold the bikes firmly but not so tight as to damage components.
- പ്ലെയ്സ്മെൻ്റ് സ്ഥിരീകരിക്കുക: Once installed, gently shake the bikes to confirm that the protector is effectively separating them and that the strap is holding them securely. Adjust as necessary.
Image: Two Thule Bike Protectors, illustrating the design with a rubber spacer and securing strap.
ചിത്രം: ക്ലോസ്-അപ്പ് view of the Thule Bike Protector in use, separating two bicycles on a car-mounted rack.
Image: Wider view of bikes secured with the Thule Bike Protector on a car rack, demonstrating effective separation.
പ്രവർത്തന നിർദ്ദേശങ്ങൾ
The Thule Bike Protector is designed for continuous use during bike transportation, parking, and storage to prevent damage.
- During Transport: Ensure the protector is securely fastened before starting any journey. Periodically check its position and tightness during long trips.
- Parking and Storage: Use the protector when bikes are parked closely together or stored in a garage or shed to prevent accidental contact and damage.
- നീക്കം ചെയ്യൽ: To remove, unfasten the strap and carefully detach the rubber spacer from between the bikes.
മെയിൻ്റനൻസ്
Proper maintenance ensures the longevity and effectiveness of your Thule Bike Protector.
- വൃത്തിയാക്കൽ: Clean the protector with mild soap and water. Rinse thoroughly and allow it to air dry completely before storage. Avoid harsh chemicals or abrasive cleaners.
- പരിശോധന: Regularly inspect the rubber spacer for any signs of wear, tears, or damage. Check the strap for fraying or loss of elasticity. Replace the protector if significant wear is observed to maintain optimal protection.
- സംഭരണം: Store the protector in a cool, dry place away from direct sunlight when not in use.
ട്രബിൾഷൂട്ടിംഗ്
If you encounter issues with your Thule Bike Protector, refer to the following common solutions.
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| Bikes still touching despite protector. | Incorrect placement of the protector or insufficient strap tightness. | Reposition the rubber spacer to the exact contact point. Ensure the strap is pulled taut and securely fastened to minimize bike movement. Consider using additional protectors if multiple contact points exist. |
| Protector slips out of position. | Strap is not tight enough or protector is not properly seated. | Tighten the strap firmly. Ensure the rubber spacer is wedged securely between the bike components. The design allows for a snug fit on various frame shapes. |
| Strap appears worn or damaged. | Normal wear and tear or excessive force during tightening. | Discontinue use if the strap is compromised. Contact Thule customer support for replacement options or consider purchasing a new unit to ensure reliable protection. |
ഉൽപ്പന്ന സവിശേഷതകൾ
| മോഡലിൻ്റെ പേര് | Bike Protector |
| ഭാഗം നമ്പർ | 988000 |
| ബ്രാൻഡ് | തുലെ |
| മെറ്റീരിയൽ | പ്ലാസ്റ്റിക് |
| ഇനത്തിന്റെ അളവുകൾ (LxWxH) | 3.9 x 7 x 15 ഇഞ്ച് |
| ഇനത്തിൻ്റെ ഭാരം | 4.59 ഔൺസ് |
| പാക്കേജ് അളവുകൾ (LxWxH) | 7.17 x 6.5 x 3.35 ഇഞ്ച് |
| പാക്കേജ് ഭാരം | 0.29 കിലോഗ്രാം |
| ഇനങ്ങളുടെ എണ്ണം | 1 |
| നിർദ്ദേശിച്ച ഉപയോക്താക്കൾ | യുണിസെക്സ്-മുതിർന്നവർ |
| മോഡൽ വർഷം | 2021 |
വാറൻ്റി വിവരങ്ങൾ
The Thule Bike Protector is covered by a പരിമിതമായ ആജീവനാന്ത വാറൻ്റി. This warranty covers defects in materials and workmanship. For specific terms, conditions, and to make a warranty claim, please refer to the official Thule webസൈറ്റ് സന്ദർശിക്കുക അല്ലെങ്കിൽ തുലെ ഉപഭോക്തൃ പിന്തുണയുമായി നേരിട്ട് ബന്ധപ്പെടുക.
ഉപഭോക്തൃ പിന്തുണ
For further assistance, questions, or to report any issues not covered in this manual, please contact Thule customer support:
- Webസൈറ്റ്: ഔദ്യോഗിക തുലെ സന്ദർശിക്കുക webപതിവുചോദ്യങ്ങൾ, ഉൽപ്പന്ന രജിസ്ട്രേഷൻ, ബന്ധപ്പെടാനുള്ള വിവരങ്ങൾ എന്നിവയ്ക്കുള്ള സൈറ്റ്.
- ബന്ധപ്പെടാനുള്ള ഫോം: Utilize the online contact form available on the Thule support page.
- ഫോൺ: തുലെ കാണുക webപ്രാദേശിക ഉപഭോക്തൃ സേവന ഫോൺ നമ്പറുകൾക്കായുള്ള സൈറ്റ്.
When contacting support, please have your product model (988000) and purchase details available.