1. ആമുഖം
The Hafele Loox5 LED 2060 Strip Light is a flexible, dimmable 12V LED ribbon designed for functional and indirect lighting applications. It is ideal for use within furniture, cabinets, and display cases, providing high-quality illumination with a high Color Rendering Index (CRI) of >90 for accurate color representation.
This manual provides essential information for the safe and correct installation, operation, and maintenance of your LED strip light.
Image 1: Hafele Loox5 LED 2060 Strip Light installed in a wooden shelf, providing accent lighting for a vase.
2 സുരക്ഷാ വിവരങ്ങൾ
Please read and understand all safety instructions before installing or operating this product. Failure to follow these instructions may result in electric shock, fire, or other hazards.
- പവർ വിച്ഛേദിക്കുക: Always ensure the power supply is disconnected before performing any installation, maintenance, or troubleshooting.
- വാല്യംtagഇ അനുയോജ്യത: This LED strip operates on 12V DC. Use only with a compatible 12V LED driver (not included). Connecting to a higher voltagഇ ഉൽപ്പന്നത്തെ നശിപ്പിക്കും.
- ഇൻഡോർ ഉപയോഗത്തിന് മാത്രം: The product has an IP20 rating, meaning it is protected against solid objects larger than 12.5mm but has no protection against water. Do not use in wet or damp സ്ഥാനങ്ങൾ.
- മുറിക്കൽ: Only cut the LED strip at the designated cut marks (every 1 inch / 25 mm). Cutting in other areas will damage the circuit and render that section inoperable.
- താപ വിസർജ്ജനം: Ensure adequate ventilation around the LED strip. Do not cover the strip with materials that could trap heat.
- പ്രൊഫഷണൽ ഇൻസ്റ്റാളേഷൻ: ഇൻസ്റ്റലേഷൻ പ്രക്രിയയുടെ ഏതെങ്കിലും ഭാഗത്തെക്കുറിച്ച് നിങ്ങൾക്ക് ഉറപ്പില്ലെങ്കിൽ, യോഗ്യതയുള്ള ഒരു ഇലക്ട്രീഷ്യനെ സമീപിക്കുക.
- ഉപയോക്തൃ സേവനയോഗ്യമായ ഭാഗങ്ങൾ ഇല്ല: Do not attempt to open or repair the LED strip. This will void the warranty.
3. പാക്കേജ് ഉള്ളടക്കം
അൺപാക്ക് ചെയ്യുമ്പോൾ എല്ലാ ഘടകങ്ങളും ഉണ്ടെന്നും കേടുപാടുകൾ സംഭവിച്ചിട്ടില്ലെന്നും ഉറപ്പാക്കുക:
- 1x Hafele Loox5 LED 2060 Strip Light (16.4 ft / 5m)
- 1x Lead Cable (approx. 2m / 78 3/4 inches)
Note: A compatible 12V LED driver is required for operation and is sold separately.
4. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
4.1 തയ്യാറാക്കൽ
- ഉപരിതലം: Ensure the installation surface is clean, dry, smooth, and free of dust or grease.
- ആസൂത്രണം: Plan the exact routing of the LED strip and the location of the 12V driver. Measure the required length of the strip.
- പവർ ഓഫ്: Disconnect power to the installation area before proceeding.
4.2 LED സ്ട്രിപ്പ് മുറിക്കൽ
The LED strip can be shortened to your desired length. Locate the designated cut marks, which occur every 1 inch (25 mm) along the strip. These marks are typically indicated by a copper pad and a scissor icon.
- Using sharp scissors, carefully cut the strip precisely on the designated cut line.
- മുന്നറിയിപ്പ്: Do not cut the strip in any other location, as this will permanently damage the circuit.
Image 2: Diagram illustrating the correct cutting points (every 1 inch / 25 mm) on the LED strip. The diagram also shows the narrow 5mm width of the strip.
4.3 Mounting the LED Strip
The LED strip features a self-adhesive backing for easy installation.
- Carefully peel off a small section of the protective liner from the back of the LED strip.
- Align the strip with your planned installation path and firmly press the exposed adhesive section onto the surface.
- Continue to peel off the liner gradually while pressing the strip firmly along its entire length to ensure good adhesion.
4.4 ഇലക്ട്രിക്കൽ കണക്ഷൻ
Connect the LED strip to a compatible 12V LED driver (sold separately).
- Connect the provided lead cable to the end of the LED strip. Ensure the connection is secure and the polarity (+ and -) is correct.
- Connect the other end of the lead cable to the output terminals of your 12V LED driver. Again, observe correct polarity.
- Connect the 12V LED driver to your main power supply according to the driver's specific installation instructions.
- പ്രധാനപ്പെട്ടത്: Ensure the 12V driver's wattage capacity is sufficient for the total length of the LED strip being used.
5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ
Once the Hafele Loox5 LED 2060 Strip Light is correctly installed and connected to a 12V LED driver, it can be operated.
- പവർ ഓൺ/ഓഫ്: The light will turn on when power is supplied to the 12V driver. Use the switch or control mechanism associated with your driver to turn the light on or off.
- മങ്ങുന്നു: This LED strip is dimmable. If your 12V driver and control system support dimming, you can adjust the light intensity using the compatible dimmer switch or control unit. Refer to the instructions provided with your dimming system for specific operation.
6. പരിപാലനം
The Hafele Loox5 LED 2060 Strip Light requires minimal maintenance.
- വൃത്തിയാക്കൽ: To clean the LED strip, ensure power is disconnected. Gently wipe the surface with a dry, soft, lint-free cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the strip.
- പരിശോധന: Periodically inspect the strip for any signs of damage, wear, or loose connections. Ensure the adhesive backing remains secure.
- അറ്റകുറ്റപ്പണികൾ: There are no user-serviceable parts inside the LED strip. Do not attempt to repair it yourself. If the strip is damaged, it should be replaced.
7. പ്രശ്നപരിഹാരം
If you encounter issues with your LED strip light, refer to the following troubleshooting guide:
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| LED സ്ട്രിപ്പ് പ്രകാശിക്കുന്നില്ല. | No power to the 12V driver. തെറ്റായ വയറിംഗ് അല്ലെങ്കിൽ അയഞ്ഞ കണക്ഷനുകൾ. Faulty 12V driver. Incorrectly cut LED strip. | Check power supply to the driver. Verify all connections (strip to lead, lead to driver) are secure and polarity is correct. Test the 12V driver with another compatible load if possible. Ensure the strip was cut only at designated marks. |
| LED strip flickers or is too dim. | Insufficient power from the 12V driver. Driver wattage capacity too low. Dimmer setting too low or incompatible dimmer. | ഇൻപുട്ട് വോളിയം പരിശോധിക്കുകtage to the driver. Ensure the driver's wattage റേറ്റിംഗ് മൊത്തം വാട്ടിനെ കവിയുന്നുtagLED സ്ട്രിപ്പിന്റെ ഇ. Adjust dimmer setting. Confirm dimmer compatibility with 12V LED products. |
| LED സ്ട്രിപ്പിന്റെ ഒരു ഭാഗം മാത്രമേ പ്രകാശിക്കുന്നുള്ളൂ. | Damage to the circuit in the unlit section. തെറ്റായ കട്ട്. | The damaged section may need to be replaced or removed. Ensure cuts are made only at designated points. |
If the problem persists after attempting these solutions, please contact Hafele customer support.
8 സ്പെസിഫിക്കേഷനുകൾ
Detailed technical specifications for the Hafele Loox5 LED 2060 Strip Light:
- മോഡൽ: Loox5 LED 2060
- വാല്യംtage: 12 V DC
- LEDs per Meter: 120
- ആകെ നീളം: 16.4 അടി (5 മീറ്റർ)
- വീതി: 3/16 ഇഞ്ച് (5 മിമി)
- ഉയരം: 1/16 ഇഞ്ച് (1.3 മിമി)
- ഇളം നിറം: Cool White 5000 K
- മങ്ങിയത്: അതെ
- കളർ റെൻഡറിംഗ് ഇൻഡക്സ് (CRI): >90
- ജീവിതകാലം: L80/B10 >50000 hours
- Power Consumption per Meter: 4.8 W
- ഊർജ്ജ കാര്യക്ഷമത ക്ലാസ്: A+
- IP കോഡ്: IP20 (ഇൻഡോർ ഉപയോഗത്തിന് മാത്രം)
- Cuttable Interval: Every 1 inch (25 mm)
- ലീഡ് കേബിൾ നീളം: 78 3/4 inches (2 m)
- സർട്ടിഫിക്കേഷനുകൾ: യുഎൽ സാക്ഷ്യപ്പെടുത്തി
- മെറ്റീരിയൽ: Vinyl, Metal, PCB
8.1 Light Output Performance (5000K)
Image 3: Light output chart indicating Lux levels at different distances (250mm, 500mm, 750mm, 1000mm) for various color temperatures, including 5000K.
9. വാറൻ്റിയും പിന്തുണയും
For detailed warranty information, product registration, or technical assistance, please visit the official Hafele website or contact Hafele customer service directly. Keep your purchase receipt as proof of purchase.