LEKATO Triple Looper Station M0-1698 Instruction Manual

ആമുഖം

Thank you for choosing the LEKATO Triple Looper Station. This compact and versatile guitar effect pedal is designed to enhance your musical creativity with its synchronous recording capabilities, built-in tuner, and extensive looping features. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure you get the most out of your device.

പ്രധാന സവിശേഷതകൾ

• Synchronous Recording & Tuner Function: Enter recording mode at any time during playback to capture ideas instantly. Features a high-sensitivity built-in tuner for accurate tuning.
• Extended Recording Time: Three independent loop slots, each capable of storing up to 6 minutes of audio, totaling 18 minutes of recording time. Recorded files are automatically saved even after power-off.
• Uncompressed Audio Quality: Supports 48K/24-bit sampling rate for professional, lossless, uncompressed sound quality with digital bypass design.
• Lossless Import/Export: Easily transfer WAV loop files to and from a PC via USB. No driver installation required.
• ഉപയോക്തൃ സൗഹൃദ പ്രവർത്തനം: Clear looping with unlimited overdubbing. Record, Undo/Redo, Stop, and Erase functions are all accessible via a single footswitch. A single knob controls loop playback volume.

പാക്കേജ് ഉള്ളടക്കം

അൺബോക്സ് ചെയ്യുമ്പോൾ പാക്കേജ് ഉള്ളടക്കങ്ങൾ പരിശോധിക്കുക. ഏതെങ്കിലും ഇനങ്ങൾ നഷ്ടപ്പെട്ടാലോ കേടായാലോ, നിങ്ങളുടെ റീട്ടെയിലറെ ബന്ധപ്പെടുക.

• 1 x LEKATO Triple Looper Station (Guitar Effect Pedal)
• 1 x USB കേബിൾ
• 1 x ഉപയോക്തൃ മാനുവൽ

Image: Contents of the LEKATO Triple Looper Station package, showing the pedal, USB cable, and user manual.

നിയന്ത്രണങ്ങളും ഇന്റർഫേസും

Familiarize yourself with the various controls and connections on your LEKATO Triple Looper Station.

ചിത്രം: മുൻഭാഗം view of the LEKATO Triple Looper Station, highlighting the level knob, LED display, and multi-function footswitch.

• ലെവൽ നോബ്: Adjusts the playback volume of the recorded loops.
• LED ഡിസ്പ്ലേ: Shows current loop bank (1-3), recording status (REC), playback status (PLAY), and tuner information (TUNE).
• Multi-Function Footswitch: Controls recording, playback, overdubbing, undo/redo, stop, and erase functions.
• DC 9V ഇൻപുട്ട്: Power supply connection (center negative, 9V DC, 100mA minimum).
• USB പോർട്ട്: For connecting to a computer to import/export WAV files.
• ഇൻപുട്ട് ജാക്ക്: Connect your instrument (guitar, bass, etc.) here.
• Jackട്ട്പുട്ട് ജാക്ക്: നിങ്ങളിലേക്ക് ബന്ധിപ്പിക്കുക ampലൈഫയർ അല്ലെങ്കിൽ മറ്റ് ഇഫക്റ്റുകൾ പെഡലുകൾ.

ചിത്രം: വിശദമായത് view of the LEKATO Triple Looper Station's input/output jacks, power input, and USB port.

സജ്ജമാക്കുക

1. പവർ കണക്ഷൻ: Connect a 9V DC center-negative power adapter (not included) to the DC 9V input jack. Ensure the power supply meets the specifications (9V DC, 100mA minimum).
2. ഉപകരണ കണക്ഷൻ: Connect your guitar or bass to the INPUT jack of the looper pedal using a standard 1/4-inch instrument cable.
3. Ampലൈഫയർ കണക്ഷൻ: Connect the OUTPUT jack of the looper pedal to your amplifier or the input of your next effects pedal in the signal chain using a standard 1/4-inch instrument cable.
4. പവർ ഓൺ: എല്ലാ കണക്ഷനുകളും സുരക്ഷിതമായിക്കഴിഞ്ഞാൽ, നിങ്ങളുടെ amplifier and then the looper pedal.

Image: The LEKATO Triple Looper Station integrated into a guitar pedalboard setup, showing connections to other pedals and an ampജീവൻ.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Selecting Loop Tracks

The looper has three independent loop tracks (1, 2, 3).

• ഒരിക്കൽ അമർത്തുക: Briefly press the footswitch once to cycle through the available loop tracks (1, 2, 3). The LED display will indicate the currently selected track.

Image: Diagram illustrating the multi-function footswitch operations: single press to select tracks, hold for 1 second to enter synchronous recording mode, and hold for 3 seconds to enter tuning mode.

Recording a Loop

1. Select an empty loop track (or one you wish to overwrite) by pressing the footswitch once.
2. Press the footswitch once to start recording. The LED display will show "REC".
3. Press the footswitch once again to stop recording and immediately start playback of the recorded loop. The LED display will show "PLAY".

ഓവർഡബ്ബിംഗ്

While a loop is playing, press the footswitch once to enter overdub mode. The LED display will show "OVERDUB". Play your new part, and it will be added to the existing loop. Press the footswitch once again to stop overdubbing and continue playback. You can overdub multiple times.

പഴയപടിയാക്കുക/വീണ്ടും ചെയ്യുക

• പഴയപടിയാക്കുക: While a loop is playing, press and hold the footswitch for approximately 1 second to undo the last recorded overdub.
• വീണ്ടും ചെയ്യുക: After performing an undo, press and hold the footswitch for approximately 1 second again to redo the undone overdub.

Stop and Erase

• പ്ലേബാക്ക് നിർത്തുക: While a loop is playing, double-press the footswitch quickly to stop playback.
• Erase Current Loop: While playback is stopped, press and hold the footswitch for approximately 3 seconds to erase the current loop. The LED display will flash to confirm deletion.
• Erase All Loops: To erase all three loops, power off the device, then press and hold the footswitch while powering it back on. Keep holding until the display confirms all loops are erased.

ട്യൂണർ പ്രവർത്തനം

The LEKATO Triple Looper Station includes a high-sensitivity built-in tuner.

• Enter Tuner Mode: Press and hold the footswitch for approximately 3 seconds. The LED display will switch to tuner mode, showing the note and pitch deviation.
• Exit Tuner Mode: Press the footswitch once to exit tuner mode and return to the previous operating state.

Synchronous Recording Mode

This mode allows you to start recording seamlessly during playback without interruption.

• Activate Sync Record: While a loop is playing, press and hold the footswitch for approximately 1 second. The LED display will indicate "SYNC REC". You can now start playing your instrument, and the recording will begin in sync with the existing loop.
• Exit Sync Record: Press the footswitch once to stop synchronous recording and continue playback.

വോളിയം ക്രമീകരണം

ഉപയോഗിക്കുക ലെവൽ knob to adjust the playback volume of the loops. This does not affect your dry instrument signal.

Importing/Exporting Loops via USB

You can transfer WAV audio files between your looper and a computer.

1. Connect the looper pedal to your computer using the provided USB cable.
2. The looper will appear as a removable storage device.
3. You can drag and drop WAV files (48K/24-bit) to and from the looper's folders (Loop1, Loop2, Loop3).
4. Ensure to safely eject the device from your computer before disconnecting the USB cable.

Image: The LEKATO Triple Looper Station connected to a laptop, demonstrating the USB interface for importing and exporting lossless WAV files.

മെയിൻ്റനൻസ്

• വൃത്തിയാക്കൽ: പെഡൽ വൃത്തിയാക്കാൻ മൃദുവായതും ഉണങ്ങിയതുമായ തുണി ഉപയോഗിക്കുക. അബ്രാസീവ് ക്ലീനറുകളോ ലായകങ്ങളോ ഉപയോഗിക്കരുത്.
• സംഭരണം: Store the pedal in a dry environment, away from direct sunlight and extreme temperatures.
• വൈദ്യുതി വിതരണം: Always use a compatible 9V DC center-negative power supply to prevent damage.
• കണക്ഷനുകൾ: എല്ലാ കേബിൾ കണക്ഷനുകളിലും തേയ്മാനം സംഭവിച്ചിട്ടുണ്ടോ എന്ന് ഇടയ്ക്കിടെ പരിശോധിക്കുക.

ട്രബിൾഷൂട്ടിംഗ്

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റിയും പിന്തുണയും

The LEKATO Triple Looper Station comes with a 1 വർഷത്തെ വാറൻ്റി from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper power supply.

For technical support, warranty claims, or any questions regarding your product, please contact LEKATO customer service through the retailer where you purchased the product or visit the official LEKATO website for contact information. Please have your purchase receipt and model number (M0-1698) ready when contacting support.