MOMIMO Bike Tail Light with Turn Signals

1. ആമുഖം

Thank you for choosing the MOMIMO Bike Tail Light with Turn Signals. This device is designed to significantly enhance your visibility and safety while cycling, especially during night rides or in low-light conditions. Featuring ultra-bright LEDs, wireless remote control, and multiple lighting modes, it provides clear signaling capabilities for turns and warnings. Please read this manual thoroughly before installation and use to ensure proper operation and to maximize the lifespan of your product.

Image: The MOMIMO Bike Tail Light unit attached to a bike seat post, with its wireless remote control.

2 സുരക്ഷാ വിവരങ്ങൾ

• സവാരി ചെയ്യുന്നതിന് മുമ്പ് എല്ലായ്പ്പോഴും ടെയിൽ ലൈറ്റ് സുരക്ഷിതമായി ഘടിപ്പിച്ചിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക.
• Do not look directly into the light when it is on, as it may cause temporary vision impairment.
• While the light is IPX4 waterproof, avoid prolonged submersion in water.
• Regularly check the battery level and charge the device to ensure optimal performance.
• Use turn signals appropriately and in conjunction with hand signals where required by local traffic laws.

3. ഉൽപ്പന്നം കഴിഞ്ഞുview

ഘടകങ്ങൾ:

• Bike Tail Light Unit
• വയർലെസ് റിമോട്ട് കൺട്രോൾ
• Mounting Straps (for tail light and remote)
• യുഎസ്ബി ചാർജിംഗ് കേബിൾ

ചിത്രം: വിശദമായത് view of the tail light unit, remote control, mounting accessories, and USB charging port.

പ്രധാന സവിശേഷതകൾ:

• Ultra Bright LED: 100 lm output for excellent visibility.
• വയർലെസ് റിമോട്ട് കൺട്രോൾ: Easily activate turn signals and change light modes.
• ഒന്നിലധികം ലൈറ്റ് മോഡുകൾ: Red light (solid), Red light-flashing, All flashing (hazard).
• ടേൺ സിഗ്നലുകൾ: Dedicated left and right turn indicators.
• വാട്ടർപ്രൂഫ് ഡിസൈൻ: IPX4 rated for reliable performance in rainy conditions.
• റീചാർജ് ചെയ്യാവുന്ന ബാറ്ററി: Built-in 1000mAh battery, charged via USB.
• വിശാലമായ ദൃശ്യപരത: 270-degree visual range with adjustable angle.
• ഉച്ചഭാഷിണി: Integrated 120 decibel loudspeaker for audible alerts.

4. സജ്ജീകരണം

4.1 Charging the Tail Light

Before first use, fully charge the tail light unit. Connect the supplied USB charging cable to the charging port on the back of the tail light and plug the other end into a USB power source (e.g., computer, wall adapter, power bank). The indicator light will show charging status.

4.2 Installing the Tail Light Unit

1. Select a suitable position on your bike's seat post.
2. Attach the mounting bracket to the seat post using the provided rubber strap. Ensure it is tight and stable.
3. Slide the tail light unit onto the mounting bracket until it clicks securely into place.
4. Adjust the angle of the tail light for optimal visibility (270-degree range).

Image: Step-by-step guide for attaching the tail light to the seat post.

4.3 Installing the Wireless Remote Control

1. Choose a convenient location on your bike's handlebar, within easy reach of your thumb.
2. Use the smaller rubber strap to securely attach the remote control to the handlebar.
3. Ensure the remote is stable and does not interfere with braking or gear shifting.

4.4 ജോടിയാക്കൽ (ആവശ്യമെങ്കിൽ)

The tail light and remote control are typically pre-paired from the factory. If they do not respond to each other, ensure both devices are powered on. Refer to the user manual for specific pairing instructions if needed, though the unboxing video suggests they are ready to use out of the box after removing the battery protector from the remote.

5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

5.1 പവർ ഓൺ/ഓഫ്

Press the main power button on the tail light unit to turn it on or off. The remote control will automatically connect when the tail light is on.

5.2 Switching Light Modes

The tail light offers three primary modes for enhanced visibility:

• ചുവന്ന വെളിച്ചം (ഖര): Constant red illumination.
• Red Light-Flashing: Red light flashes intermittently.
• All Flashing (Hazard): All LEDs (red and amber) flash simultaneously for maximum attention.

Use the central button on the remote control to cycle through these modes.

Image: Visual representation of the tail light's different illumination patterns.

5.3 Activating Turn Signals

The remote control has dedicated buttons for left and right turn signals:

• അമർത്തുക ഇടത് അമ്പ് button to activate the left turn signal. The left amber LEDs on the tail light will flash, accompanied by an audible beep.
• അമർത്തുക വലത് അമ്പടയാളം button to activate the right turn signal. The right amber LEDs on the tail light will flash, accompanied by an audible beep.

Press the same arrow button again to deactivate the turn signal.

5.4 Using the Loudspeaker (Horn)

The tail light features a 120 decibel loudspeaker for alerting pedestrians or other cyclists. This is typically integrated with the turn signal activation, providing an audible cue when signaling a turn.

Image: A cyclist on a road at night, demonstrating the visibility and audible alert of the tail light.

6. പരിപാലനം

6.1 Charging the Tail Light

Charge the tail light regularly to ensure it is ready for use. A full charge typically takes approximately 2 hours. The light can be charged via a power bank, wall charger, laptop/PC, or car charger.

Image: Various methods for charging the tail light unit.

6.2 വൃത്തിയാക്കൽ

ടെയിൽ ലൈറ്റും റിമോട്ട് കൺട്രോളും ഒരു സോഫ്റ്റ്, ഡി ഉപയോഗിച്ച് തുടയ്ക്കുകamp അഴുക്കും അവശിഷ്ടങ്ങളും നീക്കം ചെയ്യാൻ തുണി ഉപയോഗിക്കുക. അബ്രാസീവ് ക്ലീനറുകളോ ലായകങ്ങളോ ഉപയോഗിക്കരുത്.

6.3 വാട്ടർപ്രൂഫിംഗ്

The device is IPX4 waterproof, meaning it is resistant to splashing water from any direction. While it can withstand rain, avoid submerging it in water for extended periods.

Image: The tail light being tested under splashing water, demonstrating its IPX4 waterproof rating.

7. പ്രശ്‌നപരിഹാരം

• ലൈറ്റ് ഓണാക്കുന്നില്ല: ബാറ്ററി ചാർജ്ജ് ചെയ്തിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക. പവർ ബട്ടൺ ദൃഢമായി അമർത്തുക.
• റിമോട്ട് പ്രതികരിക്കുന്നില്ല: Check if the remote's battery is functional (remove plastic protector if new). Ensure the tail light is powered on. Re-pair if necessary (refer to manual for specific steps).
• ടേൺ സിഗ്നലുകൾ പ്രവർത്തിക്കുന്നില്ല: Verify the remote is paired and the tail light is on. Check for any obstructions.
• ബാറ്ററി ചാർജ്ജുചെയ്യുന്നില്ല: Ensure the USB cable and power source are working correctly. Check the charging port for debris.

8 സ്പെസിഫിക്കേഷനുകൾ

Image: Diagram showing the dimensions of the tail light and remote control.

9. വാറണ്ടിയും പിന്തുണയും

MOMIMO products are manufactured to the highest quality standards. If you encounter any issues or have questions regarding your Bike Tail Light with Turn Signals, please contact our customer support. We are committed to providing excellent service and ensuring your satisfaction.

For warranty information and support, please refer to the contact details provided on the product packaging or our official webസൈറ്റ്.