1. ആമുഖം
The Peak Elara Pen is a professional-grade permanent makeup machine designed for precision and versatility. Its lightweight and ergonomic design provides pen-like control, making it suitable for a wide range of permanent makeup procedures, including microblading, lip blush, and color correction. This manual provides essential information for the safe and effective use of your Elara Pen.
2 സുരക്ഷാ വിവരങ്ങൾ
- Always ensure the machine is disconnected from the power source before cleaning or performing maintenance.
- Use only compatible, sterile cartridge needles.
- Do not immerse the machine in liquid.
- യന്ത്രം കുട്ടികൾക്ക് ലഭ്യമാകാതെ സൂക്ഷിക്കുക.
- This device is intended for professional use by trained and certified permanent makeup artists only.
- Inspect the RCA cable for any damage before each use. Do not use if damaged.
3. ഉൽപ്പന്നം കഴിഞ്ഞുview
The Peak Elara Pen features a durable body, a detachable textured grip, and an internal drive system. It is designed for use with standard cartridge needles.
Figure 1: Peak Elara Pen Permanent Makeup Machine with a needle cartridge inserted, showcasing its sleek rose gold design.
Figure 2: The Peak Elara Pen with its textured grip detached, revealing the connection point for the grip and the RCA port at the rear.
Figure 3: The Peak Elara Pen disassembled, showing the main body, the detachable grip, and the internal drive bar, illustrating its modular design.
4. സജ്ജീകരണം
Follow these steps to set up your Peak Elara Pen for operation:
- പവർ ബന്ധിപ്പിക്കുക: Plug the included RCA cable into the machine's RCA port and connect the other end to a compatible power supply.
- Insert Cartridge Needle: Securely insert a compatible cartridge needle into the front of the machine.
- സൂചിയുടെ ആഴം ക്രമീകരിക്കുക: Rotate the grip clockwise to decrease needle depth or counter-clockwise to increase it.
- Adjust Stroke Length (Optional): The machine comes with a 3mm cam installed. To change the stroke length, detach the grip and replace the cam with either the 2.5mm or 3.5mm cam using the provided allen key.
Figure 4: Visual guide for initial setup, demonstrating power connection, needle insertion, and needle depth adjustment.
5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ
Once set up, operate your Elara Pen as follows:
- പവർ ഓൺ: Turn on your power supply and set the desired voltage.
- വാല്യംtagഇ ശ്രേണി: The Elara Pen supports a broad voltage range. A midrange voltage of 7V is optimal for most procedures. Lower voltages (5–6V) are suitable for stippling and pixel shading, while higher voltages (8V) are recommended for lip blushing and color correction.
- നടപടിക്രമം: Begin your permanent makeup procedure, maintaining proper technique and hygiene.
- പവർ ഓഫ്: After use, turn off the power supply and disconnect the machine.
6. പരിപാലനം
Proper maintenance ensures the longevity and performance of your Elara Pen:
- വൃത്തിയാക്കൽ: After each use, wipe down the exterior of the machine with a suitable disinfectant wipe. Ensure no liquids enter the internal components.
- വന്ധ്യംകരണം: The machine itself is not autoclavable. Only the needle cartridges are sterile and disposable.
- സംഭരണം: നേരിട്ടുള്ള സൂര്യപ്രകാശവും കടുത്ത താപനിലയും ഏൽക്കാത്ത വൃത്തിയുള്ളതും വരണ്ടതുമായ സ്ഥലത്ത് മെഷീൻ സൂക്ഷിക്കുക.
- പരിശോധന: Regularly inspect the machine for any signs of wear or damage, especially the RCA port and grip connection.
7. പ്രശ്നപരിഹാരം
If you encounter issues with your Elara Pen, refer to the following common solutions:
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| മെഷീൻ ഓണാക്കുന്നില്ല | Loose RCA connection, faulty power supply, damaged cable. | Check all connections. Test with a different RCA cable or power supply if available. |
| Needle not moving or weak operation | തെറ്റായ വോളിയംtage setting, needle cartridge issue, drive bar obstruction. | വോളിയം ക്രമീകരിക്കുകtage. Replace needle cartridge. Ensure drive bar moves freely. |
| അമിതമായ വൈബ്രേഷൻ അല്ലെങ്കിൽ ശബ്ദം | Loose components, worn O-rings, incorrect assembly. | Ensure grip is securely attached. Check O-rings for wear and replace if necessary (2 O-rings included). Reassemble carefully. |
8 സ്പെസിഫിക്കേഷനുകൾ
- ബ്രാൻഡ്: കൊടുമുടി
- മോഡൽ: Elara Pen
- Stroke Lengths: 2.5mm, 3mm (pre-installed), 3.5mm (interchangeable cams included)
- സൂചിയുടെ ആഴം: Adjustable by rotating grip
- വാല്യംtagഇ ശ്രേണി: Broad, suitable for various procedures (e.g., 5-6V for stippling, 8V for lip blush)
- അനുയോജ്യത: Most standard cartridge needles
- കണക്ഷൻ: ആർസിഎ
- ഉൾപ്പെടുത്തിയ ആക്സസറികൾ: RCA cable, 2 O-rings, spring, allen key, drive bar
- ASIN: B09G3ZKXW4
- UPC: 850011407547
9. വാറൻ്റിയും പിന്തുണയും
For detailed warranty information and customer support, please refer to the official Peak website or contact your authorized distributor. Keep your proof of purchase for any warranty claims.
ഉദ്യോഗസ്ഥൻ Webസൈറ്റ്: Visit the Peak Store on Amazon