ആമുഖം
The Gustard U18 is a high-performance USB Digital Interface designed to enhance your audio system. It functions as a ground isolation USB bridge and a hi-end audio interface, supporting high-resolution audio formats such as DSD512 and PCM768K. Featuring advanced components like the XMOS XU216 processor, K2 clock synthesizer, and AS338 audio oscillators, the U18 provides multiple output interfaces including IIS, AES, Optical, Coaxial, and Clock outputs for versatile connectivity with various audio devices.
സുരക്ഷാ കുറിപ്പുകൾ
- നേരിട്ട് സൂര്യപ്രകാശം, താപ സ്രോതസ്സുകൾ, വൈബ്രേഷൻ, പൊടി, ഈർപ്പം അല്ലെങ്കിൽ തണുപ്പ് എന്നിവയിൽ നിന്ന് അകലെ, നന്നായി വായുസഞ്ചാരമുള്ളതും, തണുത്തതും, വരണ്ടതും, വൃത്തിയുള്ളതുമായ സ്ഥലത്ത് ഈ യൂണിറ്റ് സ്ഥാപിക്കുക.
- നിർദ്ദിഷ്ട വോള്യം മാത്രം ഉപയോഗിക്കുകtage for this unit. Using this unit with a higher voltage than specified is dangerous and may cause fire, damage to this unit, or personal injury. The manufacturer is not responsible for any damage resulting from the use of this unit with an incorrect voltage.
- Do not attempt to modify or repair this unit yourself. Contact the salesperson or customer service when any service is needed. The cabinet should never be opened for any reason.
- When not planning to use this unit for long periods (e.g., during vacation), disconnect the power cable from the AC wall outlet.
ഫീച്ചറുകൾ
- XMOS XU216 Processor: Equipped with 16 cores for rich resources and a smooth audio experience, supporting DSD512 and PCM768K.
- Independent CPLD for Signal Shaping: The isolated IIS signal is reshaped to remove jitter introduced by the isolator.
- Complete Grounding Isolation: Achieved by a 200 Mbps isolator to eliminate all interference from your PC.
- 2nd Generation K2 Clock Synthesizer: Features ultra-low noise and supports external OCXO. K2 can generate audio-specific frequencies using a 10MHz clock source with extremely low loss.
- Accusilicon AS338 Hi-End Audio Oscillators: Two AS338 oscillators ensure strict requirements, packaged with nitrogen gas and 100% checked by phase noise analyzer. Jitter is as low as 38fs, improving bass quality and harmony.
- LT3045 Linear Regulator: The clock power supply is based on LT3045, a high-performance low dropout linear regulator with an RMS Noise of only 0.8µVRMS (10Hz to 100KHz).
- Configurable IIS Pinout: Offers 4 modes for compatibility with various DACs.
- റിച്ച് ഇന്റർഫേസുകൾ: Includes USB, IIS-H, AES, Coaxial, Optical, and Clock inputs/outputs.
പാക്കേജ് ഉള്ളടക്കം
Upon unboxing your Gustard U18, please verify that all the following items are included:
- Gustard U18 USB Digital Interface Unit
- USB കേബിൾ
- എസി പവർ കേബിൾ
- ഉപയോക്തൃ മാനുവൽ
- വാറൻ്റി കാർഡ്
വീഡിയോ: Unboxing the Gustard U18 USB Digital Interface. This video demonstrates the contents of the package and the initial unboxing experience.

ചിത്രം: A visual representation of the Gustard U18 unit and its included accessories, such as cables and documentation.
ഉൽപ്പന്നം കഴിഞ്ഞുview
ഫ്രണ്ട് പാനൽ

ചിത്രം: ഫ്രണ്ട് view of the Gustard U18, showing the display screen, REF button, and IIS button.
- ഡിസ്പ്ലേ സ്ക്രീൻ: Shows current status and settings.
- REF ബട്ടൺ: Used for input selection or other reference functions.
- IIS Button: Used for IIS pinout configuration or DSD flag settings.
പിൻ പാനൽ

ചിത്രം: പിൻഭാഗം view of the Gustard U18, highlighting all input and output ports.
- ഒപ്റ്റിക്കൽ ഔട്ട്പുട്ട്: Digital audio output via optical fiber.
- AES ഔട്ട്പുട്ട്: Professional digital audio output via XLR connector.
- COAX Output: Digital audio output via coaxial cable.
- IIS Output: Digital audio output via HDMI connector (not standard HDMI video).
- WCK Output: Word Clock output.
- 10M CLK Input: Input for external 10MHz clock.
- യുഎസ്ബി ഇൻപുട്ട്: USB Type-B female connector for connecting to a computer or other USB audio source.
- വാല്യംtage Switching (110/220V): Switch to select appropriate input voltage.
- പവർ ഇൻപുട്ട്: AC power connector.
- വൈദ്യുതി സ്വിച്ച്: മെയിൻ പവർ ഓൺ/ഓഫ് സ്വിച്ച്.
- ഫ്യൂസ്: Fuse holder for power protection.
സജ്ജമാക്കുക
Follow these steps to set up your Gustard U18:
- പവർ കണക്ഷൻ: വോളിയം ഉറപ്പാക്കുകtage switch on the rear panel is set to the correct local voltage (110V or 220V). Connect the supplied AC power cable to the unit's power input and then to a wall outlet.
- USB Source Connection: Connect your audio source (e.g., PC, Android device, iOS device, PS5, Nintendo Switch) to the യുഎസ്ബി ഇൻപുട്ട് on the rear panel using the provided USB cable.
- ഓഡിയോ ഔട്ട്പുട്ട് കണക്ഷൻ: Connect the Gustard U18 to your DAC or amplifier using one of the available digital outputs: IIS ഔട്ട്പുട്ട് (via HDMI cable, ensure your DAC supports IIS over HDMI), AES ഔട്ട്പുട്ട്, COAX ഔട്ട്പുട്ട്, അല്ലെങ്കിൽ ഒപ്റ്റിക്കൽ put ട്ട്പുട്ട്. Choose the output that best suits your receiving device.
- External Clock (Optional): If you are using an external 10MHz clock, connect it to the 10M CLK Input.
- പവർ ഓൺ: ഫ്ലിപ്പുചെയ്യുക പവർ സ്വിച്ച് on the rear panel to the 'ON' position. The front display screen will illuminate.
- Driver Installation (for PC): For Windows operating systems, you may need to install specific drivers. Refer to the official Gustard website for the latest drivers. macOS and Linux typically do not require additional drivers.
പ്രവർത്തന നിർദ്ദേശങ്ങൾ
The Gustard U18 features intuitive controls for seamless operation:
- ഇൻപുട്ട് തിരഞ്ഞെടുക്കൽ: അമർത്തുക REF ബട്ടൺ on the front panel to cycle through the available digital inputs (USB, Optical, Coaxial, 10M CLK). The selected input will be indicated on the display screen.
- IIS Pinout Configuration: The IIS output has 4 configurable modes. Press the IIS Button to change the pinout mode. The current mode will be displayed. Please confirm your DAC's pinout before changing this option. Only these 4 modes are supported.
- DSD Flag Setting: ദീർഘനേരം അമർത്തുക IIS Button to change the DSD Flag setting. This is important for proper DSD signal recognition by your DAC.
- വിവരങ്ങൾ പ്രദർശിപ്പിക്കുക: The front display screen provides real-time information about the active input, sampling rate, and DSD status.
സ്പെസിഫിക്കേഷനുകൾ
| ഇൻപുട്ട് | ഒപ്റ്റിക്കൽ / ഏകോപന / യുഎസ്ബി |
| ഔട്ട്പുട്ട് ലെവൽ | 2 വിരകൾ |
| THD+N | 0.00009% (-105dB) |
| ഡൈനാമിക് റേഞ്ച് | 125dB |
| എസ്.എൻ.ആർ | 125dB |
| USB സ്പെസിഫിക്കേഷനുകൾ | UAC1/UAC2 (selectable by switch) |
| USB അനുയോജ്യത | Windows 7/8/8.1/10/11 (needs drivers), Mac OSX0.6+, Linux (Driverless), Android, iOS, SONY PS5 (UAC1), Nintendo SWITCH (UAC1) |
| യുഎസ്ബി പിസിഎം എസ്ampലിംഗ് നിരക്ക് | 44.1-768kHz (32bit) |
| USB DSD Sampലിംഗ് നിരക്ക് | 2.8224-22.5792MHz (1bit), DoP256 |
| Optical/Coaxial PCM Sampലിംഗ് നിരക്ക് | 44.1-192kHz (24bit) |
| Optical/Coaxial DoP | DoP64 |
| വൈദ്യുതി ഉപഭോഗം | <5W |
| സ്റ്റാൻഡ്ബൈ പവർ | <0.1W |
| അളവുകൾ (WxHxD) | 220 x 170 x 50mm (excluding protrusions) |
| ഭാരം (പാക്കേജിനൊപ്പം) | 2.5 കിലോ |
ട്രബിൾഷൂട്ടിംഗ്
If you encounter issues with your Gustard U18, please refer to the following common troubleshooting steps:
- ശക്തിയില്ല: Ensure the AC power cable is securely connected to both the unit and the wall outlet. Check the power switch position and the fuse. Verify the voltagഇ സ്വിച്ച് ശരിയായി സജ്ജീകരിച്ചിരിക്കുന്നു.
- സൗണ്ട് ഔട്ട്പുട്ട് ഇല്ല:
- Verify the correct input is selected on the U18 using the REF button.
- Check all audio cables (USB, IIS, AES, Coaxial, Optical) for secure connections.
- Ensure your DAC/amplifier is powered on and the correct input is selected on that device.
- If using IIS output, confirm the IIS pinout mode on the U18 matches your DAC's requirements.
- For PC connections, ensure the correct audio driver is installed and selected as the output device in your operating system's sound settings.
- Intermittent Audio/Signal Drops:
- Check USB cable quality and connection. Try a different USB port or cable.
- Ensure your computer's USB port is providing stable power.
- Minimize other USB devices connected to the same hub or computer.
- If using an external clock, ensure it is stable and properly connected.
- വികലമായ ശബ്ദം:
- എസ് എന്ന് പരിശോധിക്കുകampling rate and bit depth settings on your source device match the capabilities of the U18 and your DAC.
- ഏതെങ്കിലും അയഞ്ഞ കേബിൾ കണക്ഷനുകൾ ഉണ്ടോയെന്ന് പരിശോധിക്കുക.
If the problem persists after trying these steps, please contact AOSHIDA customer support for further assistance.
മെയിൻ്റനൻസ്
To ensure the longevity and optimal performance of your Gustard U18, follow these maintenance guidelines:
- വൃത്തിയാക്കൽ: യൂണിറ്റിന്റെ പുറംഭാഗം തുടയ്ക്കാൻ മൃദുവായതും ഉണങ്ങിയതുമായ തുണി ഉപയോഗിക്കുക. അബ്രാസീവ് ക്ലീനറുകൾ, ലായകങ്ങൾ അല്ലെങ്കിൽ കെമിക്കൽ സ്പ്രേകൾ എന്നിവ ഉപയോഗിക്കുന്നത് ഒഴിവാക്കുക, കാരണം ഇവ ഫിനിഷിന് കേടുവരുത്തും.
- വെൻ്റിലേഷൻ: Ensure the unit has adequate ventilation. Do not block the ventilation holes or place the unit in an enclosed space that restricts airflow.
- സംഭരണം: When not in use for extended periods, store the unit in a cool, dry place, away from direct sunlight and extreme temperatures. Disconnect the power cable.
- കേബിൾ കണക്ഷനുകൾ: എല്ലാ കേബിൾ കണക്ഷനുകളും സുരക്ഷിതമാണെന്നും കേടുപാടുകൾ സംഭവിച്ചിട്ടില്ലെന്നും ഉറപ്പാക്കാൻ ഇടയ്ക്കിടെ പരിശോധിക്കുക.
വാറൻ്റിയും പിന്തുണയും
AOSHIDA provides comprehensive support for its products, including the Gustard U18 USB Digital Interface.
- വാറൻ്റി കാലയളവ്: The product comes with a one-year free repair period, which may be extended depending on the specific brand and product. Please refer to your warranty card for detailed terms and conditions.
- തിരികെ നൽകൽ നയം: 30 ദിവസത്തെ റിട്ടേൺ പോളിസി വാഗ്ദാനം ചെയ്യുന്നു.
- കസ്റ്റമർ സർവീസ്: 24-hour online service is available for any questions or assistance you may need.
- ബന്ധപ്പെടാനുള്ള വിവരങ്ങൾ: For consulting and after-sales service, please contact our after-sales team via email at service@aoshida-audio.com.