POFAN Q5-TX Wireless HDMI Transmitter User Manual

1. ഉൽപ്പന്നം കഴിഞ്ഞുview

The POFAN Q5-TX is a wireless HDMI transmitter designed to extend HDMI signals wirelessly. It is compatible with specific POFAN wireless receivers (ASIN: B09QKHKPCM ഒപ്പം ASIN: B09FPHWNHY). This transmitter supports 2.4GHz and 5GHz frequencies for stable video and audio streaming and features a compact design with a built-in antenna for discreet placement. One receiver can support up to 8 transmitters, allowing for flexible switching between multiple sources.

Figure 1: POFAN Q5-TX Wireless HDMI Transmitter. This image shows the compact, oval-shaped transmitter with a short USB-C cable and an HDMI male connector, featuring a central button and an indicator light.

2. പാക്കേജ് ഉള്ളടക്കം

നിങ്ങളുടെ പാക്കേജിൽ എല്ലാ ഇനങ്ങളും ഉണ്ടെന്ന് ദയവായി പരിശോധിക്കുക:

• POFAN Q5-TX Wireless HDMI Transmitter
• ഉപയോക്തൃ മാനുവൽ (ഈ പ്രമാണം)
• (Note: Receiver unit and other accessories are sold separately and are required for operation.)

3. ഘടക ഐഡന്റിഫിക്കേഷൻ

Figure 2: Diagram illustrating the components of the POFAN Wireless HDMI Receiver and Transmitter. The receiver unit is shown with ports for 3.5mm Audio Jack, USB-C Input, HDMI Port, VGA Port, Antennas, Power Indicator Light, and ON/OFF switch. The transmitter unit is shown with HDMI Male connector, Mesh Vent, USB-C Input, Signal Projection Switch, and Power Indicator Light.

Receiver (Example, sold separately)

1. 3.5 എംഎം ഓഡിയോ ജാക്ക്
2. USB-C ഇൻപുട്ട്
3. HDMI പോർട്ട്
4. വിജിഎ പോർട്ട്
5. ആൻ്റിന
6. Smooth Glass Surface
7. പവർ ഇൻഡിക്കേറ്റർ ലൈറ്റ്
8. ഓൺ/ഓഫ് സ്വിച്ച്

Transmitter (Q5-TX)

1. HDMI Male Connector
2. മെഷ് വെൻ്റ്
3. USB-C Input (for power)
4. Signal Projection Switch (main button)
5. പവർ ഇൻഡിക്കേറ്റർ ലൈറ്റ്
6. Smooth Glass Surface

4. സജ്ജീകരണ, ജോടിയാക്കൽ നിർദ്ദേശങ്ങൾ

The POFAN Q5-TX transmitter is designed for plug-and-play operation. It requires pairing with a compatible POFAN wireless receiver (ASIN: B09QKHKPCM or B09FPHWNHY) to function. Follow these steps to establish a connection:

Initial Pairing Process

1. റിസീവർ തയ്യാറാക്കുക: Ensure your POFAN receiver is powered on and connected to your display (TV, monitor, or projector) via HDMI or VGA.
2. Activate Receiver Pairing Mode: Locate the "Pairing Button" hole at the bottom of the receiver. Use a card pin or a similar thin object to press and hold this button for 5-8 seconds.
3. Confirm Receiver Status: Observe your display. The message "Ready to Pair" should appear on the TV screen, indicating the receiver is awaiting a connection.
4. Activate Transmitter Pairing Mode: Take your Q5-TX transmitter. Press and hold the main button (Signal Projection Switch) on the transmitter for approximately 5 seconds.
5. Confirm Transmitter Status: The indicator light in the middle of the transmitter will begin to flash. Release the button.
6. യാന്ത്രിക ജോടിയാക്കൽ: The transmitter and receiver will automatically attempt to pair. Once successful, the indicator light on the transmitter will become solid, and the display will show the transmitted content.

Figure 3: Visual guide for the initial pairing process. Step 1 shows pressing the pairing button on the receiver. Step 2 shows the "Ready to Pair" message on the TV screen. Step 3 shows pressing the button on the transmitter to initiate pairing.

Reset and Re-pairing Procedure

If you encounter issues or need to re-pair your transmitter, follow these steps:

Figure 4: Step-by-step guide for resetting and re-pairing the POFAN Wireless HDMI system. Step 1 illustrates inserting a thimble into the receiver's RESET position. Step 2 shows pressing the transmitter button for 3 seconds. Step 3 depicts the screen showing "Pairing" and waiting for connection. Step 4 indicates the transmitter indicator light remaining on for a successful connection.

1. റിസീവർ പുനഃസജ്ജമാക്കുക: With the receiver powered on, insert a thimble or a similar thin object into the "RESET" position on the receiver. Hold for 3 seconds. The receiver will enter pairing mode.
2. Activate Transmitter Pairing: Press the main button on the transmitter for 3 seconds. The light status will become fast flashing, indicating it is ready to pair.
3. Monitor Pairing: The display screen will show "Pairing." Kindly wait for approximately 20 seconds for the connection to be established between the transmitter and receiver.
4. കണക്ഷൻ സ്ഥിരീകരണം: Once successfully paired, the transmitter indicator light will remain solid on.

5. ഓപ്പറേഷൻ

Once the Q5-TX transmitter is successfully paired with a compatible receiver, operation is straightforward.

Connecting to Source Devices

The Q5-TX transmitter features an HDMI male connector. Simply plug it into the HDMI output port of your source device. Compatible devices include:

• PC (Desktop Computers)
• ലാപ്ടോപ്പ്
• സെറ്റ്-ടോപ്പ് ബോക്സ്
• Gaming Consoles (PS3/PS4, Nintendo Switch)
• ക്യാമറകൾ
• DV (Digital Video Cameras)

The transmitter also has a USB-C input for power. Ensure it is connected to a power source (e.g., a USB port on your laptop or a USB power adapter) if your source device's HDMI port does not provide sufficient power.

Figure 5: This diagram illustrates the wide compatibility of the POFAN Wireless HDMI system. It shows various input devices (PC, Laptop, Set-top box, PS3/4, Nintendo Switch, Camera, DV) connecting to the transmitter, which then wirelessly transmits to the receiver, connected to output devices (Projector, Monitor, TV).

Multi-Transmitter Switching (Many-to-One Mode)

A single POFAN receiver can support up to 8 Q5-TX transmitters. This allows for seamless switching between multiple source devices connected to different transmitters, all displaying on the same receiver-connected screen.

1. Ensure all transmitters are paired with the receiver.
2. To switch between active transmitters, simply press the main button (Signal Projection Switch) on the desired transmitter. The receiver will automatically switch to display the content from that transmitter.
3. This operation allows for quick and efficient content sharing without reconnecting cables.

Figure 6: This image demonstrates the "Many-to-One Mode" feature, showing multiple laptops (each with a transmitter) wirelessly connecting to a single receiver, which is then connected to a large display, allowing for one-click switching between sources.

6. പരിപാലനം

The POFAN Q5-TX Wireless HDMI Transmitter requires minimal maintenance. Follow these guidelines to ensure longevity and optimal performance:

• വൃത്തിയാക്കൽ: ഉപകരണത്തിന്റെ പുറംഭാഗം വൃത്തിയാക്കാൻ മൃദുവായതും ഉണങ്ങിയതുമായ തുണി ഉപയോഗിക്കുക. ദ്രാവക ക്ലീനറുകളോ ഉരച്ചിലുകളുള്ള വസ്തുക്കളോ ഉപയോഗിക്കുന്നത് ഒഴിവാക്കുക.
• സംഭരണം: നേരിട്ടുള്ള സൂര്യപ്രകാശവും കടുത്ത താപനിലയും ഏൽക്കാത്ത തണുത്തതും വരണ്ടതുമായ സ്ഥലത്ത് ട്രാൻസ്മിറ്റർ സൂക്ഷിക്കുക.
• കൈകാര്യം ചെയ്യൽ: ഉപകരണം ശ്രദ്ധയോടെ കൈകാര്യം ചെയ്യുക. അത് താഴെയിടുകയോ ശക്തമായ ആഘാതങ്ങൾക്ക് വിധേയമാക്കുകയോ ചെയ്യരുത്.
• ശക്തി: Always use the recommended power source (USB-C 5V) to power the transmitter if the HDMI source does not provide sufficient power.

7. പ്രശ്‌നപരിഹാരം

If you encounter issues with your POFAN Q5-TX Wireless HDMI Transmitter, please refer to the following troubleshooting tips:

• ഡിസ്പ്ലേയിൽ സിഗ്നൽ ഇല്ല:
  • Ensure the transmitter is properly connected to the source device's HDMI output.
  • Verify the transmitter is receiving power (check the indicator light). If necessary, connect a USB-C power source.
  • Confirm the receiver is powered on and correctly connected to the display.
  • Ensure the display is set to the correct HDMI input channel.
  • Perform the re-pairing procedure as described in Section 4.
• Intermittent Signal or Poor Quality:
  • ട്രാൻസ്മിറ്ററും റിസീവറും തമ്മിലുള്ള ദൂരം കുറയ്ക്കുക.
  • Ensure there are no significant obstructions (walls, large metal objects) between the devices.
  • Minimize interference from other wireless devices operating on 2.4GHz or 5GHz frequencies.
  • Check if the source device's resolution is supported by the receiver and display.
• Transmitter Not Pairing:
  • Follow the "Initial Pairing Process" or "Reset and Re-pairing Procedure" carefully (Section 4).
  • Ensure the receiver is in "Ready to Pair" mode.
  • Confirm the transmitter's indicator light is flashing during its pairing attempt.
• ഓഡിയോ പ്രശ്നങ്ങൾ:
  • Verify that the source device is outputting audio via HDMI.
  • Check audio settings on your display or connected audio system.
  • Ensure the receiver's 3.5mm audio jack (if used) is connected correctly to an audio output device.

8 സ്പെസിഫിക്കേഷനുകൾ

9. വാറൻ്റിയും പിന്തുണയും

POFAN is committed to providing high-quality products and excellent customer service. While specific warranty details are not provided in this manual, we encourage you to register your product on the official POFAN webസഹായത്തിനായി സൈറ്റ് അല്ലെങ്കിൽ ഞങ്ങളുടെ പിന്തുണാ ടീമിനെ ബന്ധപ്പെടുക.

For technical support, troubleshooting, or warranty inquiries, please visit the POFAN Store on Amazon അല്ലെങ്കിൽ നിങ്ങളുടെ വാങ്ങലിനൊപ്പം നൽകിയിരിക്കുന്ന കോൺടാക്റ്റ് വിവരങ്ങൾ പരിശോധിക്കുക.

Figure 7: The official POFAN brand logo.