1. ആമുഖം
Thank you for choosing the InFocus P120 INL412 Multimedia Projector. This manual provides essential information for the safe and efficient operation of your projector. Please read it thoroughly before using the device and retain it for future reference. The InFocus P120 INL412 is designed for versatile multimedia presentations, offering clear and vibrant images for various applications.
2 സുരക്ഷാ വിവരങ്ങൾ
To ensure safe operation and prevent damage to the projector, please observe the following safety precautions:
- Do not block the ventilation openings. Ensure adequate space around the projector for proper airflow to prevent overheating.
- എൽ ചെയ്യുമ്പോൾ പ്രൊജക്ടർ ലെൻസിലേക്ക് നേരിട്ട് നോക്കുന്നത് ഒഴിവാക്കുകamp തിളക്കമുള്ള വെളിച്ചം കണ്ണിന് കേടുപാടുകൾ വരുത്തുമെന്നതിനാൽ ഓണാണ്.
- Do not place the projector on an unstable cart, stand, or table. The projector may fall, causing serious injury to a child or adult, and serious damage to the unit.
- Disconnect the power cord from the wall outlet if the projector will not be used for an extended period.
- Refer all servicing to qualified service personnel. Do not attempt to open or repair the projector yourself.
- Keep the projector away from water or moisture. Do not expose it to rain or immerse it in liquid.
- Use only the power cord supplied with the projector or an authorized replacement.
3. പാക്കേജ് ഉള്ളടക്കം
Verify that all items listed below are included in your projector package:
- InFocus P120 INL412 Multimedia Projector
- പവർ കോർഡ്
- ബാറ്ററികളുള്ള റിമോട്ട് കൺട്രോൾ
- വിജിഎ കേബിൾ
- ഉപയോക്തൃ മാനുവൽ (ഈ പ്രമാണം)
- ദ്രുത ആരംഭ ഗൈഡ്
4. ഉൽപ്പന്നം കഴിഞ്ഞുview
Familiarize yourself with the main components of your InFocus P120 INL412 projector.
ചിത്രം 1: മുൻഭാഗം view of the InFocus P120 INL412 Multimedia Projector, showing the lens and ventilation grilles.
4.1 ഫ്രണ്ട് പാനൽ
- പ്രൊജക്ഷൻ ലെൻസ്: ചിത്രം സ്ക്രീനിലേക്ക് എമിറ്റ് ചെയ്യുന്നു.
- ഫോക്കസ് റിംഗ്: പ്രൊജക്റ്റ് ചെയ്ത ചിത്രത്തിന്റെ വ്യക്തത ക്രമീകരിക്കുന്നു.
- സൂം റിംഗ്: പ്രൊജക്റ്റ് ചെയ്ത ചിത്രത്തിന്റെ വലുപ്പം ക്രമീകരിക്കുന്നു.
- ഐആർ റിസീവർ: റിമോട്ട് കൺട്രോളിൽ നിന്ന് സിഗ്നലുകൾ സ്വീകരിക്കുന്നു.
4.2 ടോപ്പ് പാനൽ
- നിയന്ത്രണ പാനൽ: Buttons for power, menu navigation, source selection, and keystone correction.
- ഇൻഡിക്കേറ്റർ ലൈറ്റുകൾ: Display the projector's status (e.g., power, lamp, temperature).
4.3 പിൻ പാനൽ (കണക്റ്റിവിറ്റി)
- എച്ച്ഡിഎംഐ ഇൻപുട്ട്: Connects to HDMI-enabled devices (laptops, Blu-ray players).
- VGA ഇൻപുട്ട്: Connects to computers with VGA output.
- USB പോർട്ട്: For service or connecting USB devices (if supported by model).
- ഓഡിയോ ഇൻ/ഔട്ട്: ബാഹ്യ ഓഡിയോ ഉറവിടങ്ങളോ സ്പീക്കറുകളോ ബന്ധിപ്പിക്കുന്നതിന്.
- പവർ ഇൻലെറ്റ്: പവർ കോർഡ് ബന്ധിപ്പിക്കുന്നു.
5. സജ്ജീകരണം
നിങ്ങളുടെ പ്രൊജക്ടറിൻ്റെ പ്രാരംഭ സജ്ജീകരണത്തിനായി ഈ ഘട്ടങ്ങൾ പാലിക്കുക:
- പ്ലേസ്മെൻ്റ്: Place the projector on a stable, flat surface or mount it securely. Ensure the projector is positioned at an appropriate distance from the screen to achieve the desired image size.
- പവർ കണക്ഷൻ: Connect the power cord to the projector's power inlet and then to a grounded electrical outlet.
- ഉറവിട ഉപകരണം ബന്ധിപ്പിക്കുക: Connect your source device (e.g., laptop, DVD player) to the projector using an appropriate cable (HDMI, VGA, etc.). Ensure the cable is securely connected to both the source and the projector.
- പവർ ഓൺ: Press the power button on the projector's control panel or the remote control to turn on the projector. The power indicator light will illuminate.
- ഫോക്കസും സൂമും ക്രമീകരിക്കുക: Once an image is projected, rotate the focus ring on the lens until the image is sharp and clear. Use the zoom ring to adjust the image size to fit your screen.
- കീസ്റ്റോൺ തിരുത്തൽ: If the image appears trapezoidal, use the keystone correction function (either via buttons on the projector/remote or through the on-screen menu) to square the image.
6. പ്രവർത്തന നിർദ്ദേശങ്ങൾ
6.1 പവർ ഓൺ/ഓഫ്
- പവർ ഓണാക്കാൻ: Press the power button once. The projector will go through a warm-up sequence.
- പവർ ഓഫ് ചെയ്യാൻ: Press the power button twice. The first press will prompt a shutdown confirmation; the second press will initiate shutdown. Allow the projector to cool down completely before unplugging.
6.2 ഉറവിട തിരഞ്ഞെടുപ്പ്
Press the 'Source' button on the projector or remote control to cycle through available input sources (HDMI, VGA, etc.) until your desired source is displayed.
6.3 മെനു നാവിഗേഷൻ
Press the 'Menu' button to access the on-screen display (OSD) menu. Use the arrow buttons to navigate through options and 'Enter' or 'OK' to select. Use the 'Exit' or 'Menu' button to close the OSD.
- ചിത്ര ക്രമീകരണങ്ങൾ: Adjust brightness, contrast, color, aspect ratio, and picture mode.
- ഡിസ്പ്ലേ ക്രെമീകരണങ്ങൾ: Configure keystone, projection mode (front/rear, desktop/ceiling), and resolution.
- ഓഡിയോ ക്രമീകരണങ്ങൾ: Control volume and audio output options.
- സിസ്റ്റം ക്രമീകരണങ്ങൾ: Manage language, timer, power-saving modes, and factory reset.
7. പരിപാലനം
പതിവ് അറ്റകുറ്റപ്പണികൾ മികച്ച പ്രകടനം ഉറപ്പാക്കുകയും നിങ്ങളുടെ പ്രൊജക്ടറിന്റെ ആയുസ്സ് വർദ്ധിപ്പിക്കുകയും ചെയ്യുന്നു.
- ലെൻസ് ക്ലീനിംഗ്: ഒപ്റ്റിക്കൽ പ്രതലങ്ങൾക്കായി പ്രത്യേകം രൂപകൽപ്പന ചെയ്ത മൃദുവായ, ലിന്റ് രഹിത തുണി ഉപയോഗിച്ച് പ്രൊജക്ടർ ലെൻസ് സൌമ്യമായി തുടയ്ക്കുക. അബ്രാസീവ് ക്ലീനറുകളോ അമിതമായ ബലപ്രയോഗമോ ഉപയോഗിക്കരുത്.
- കാബിനറ്റ് ക്ലീനിംഗ്: Use a soft, dry cloth to clean the projector's exterior. For stubborn marks, dampen the cloth slightly with water. Avoid using harsh chemicals.
- എയർ ഫിൽറ്റർ വൃത്തിയാക്കൽ/മാറ്റിസ്ഥാപിക്കൽ: Check the air filter periodically. If your model has a removable filter, clean it with a soft brush or vacuum cleaner. Replace the filter as recommended in the on-screen menu or when visibly dirty to maintain proper ventilation.
- Lamp മാറ്റിസ്ഥാപിക്കൽ: പ്രൊജക്ടർ എൽamp പരിമിതമായ ആയുസ്സ് ഉണ്ട്. lamp life indicator appears, or the image brightness significantly decreases, replace the lamp according to the instructions provided in the full service manual or by a qualified technician. Always allow the projector to cool down completely before attempting lamp മാറ്റിസ്ഥാപിക്കൽ.
8. പ്രശ്നപരിഹാരം
പൊതുവായ പ്രശ്നങ്ങളും അവയുടെ പരിഹാരങ്ങളും അറിയാൻ താഴെയുള്ള പട്ടിക കാണുക:
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| ചിത്രമൊന്നും പ്രദർശിപ്പിച്ചിട്ടില്ല | Power cord disconnected, incorrect input source, source device off. | Check power connections. Select correct input source. Ensure source device is powered on. |
| ചിത്രം മങ്ങിയതാണ് | ലെൻസ് ഫോക്കസിന് പുറത്താണ്, തെറ്റായ പ്രൊജക്ഷൻ ദൂരം. | Adjust the focus ring on the lens. Reposition the projector closer or further from the screen. |
| ചിത്രം ട്രപസോയിഡൽ ആണ് | പ്രൊജക്ടർ സ്ക്രീനിന് ലംബമല്ല. | Use keystone correction (manual or automatic) to square the image. |
| പ്രൊജക്ടർ അമിതമായി ചൂടാകുകയും ഓഫാകുകയും ചെയ്യുന്നു | Blocked ventilation, dirty air filter. | വെന്റുകൾക്ക് ചുറ്റും ശൂന്യമായ ഇടം ഉറപ്പാക്കുക. എയർ ഫിൽട്ടർ വൃത്തിയാക്കുക അല്ലെങ്കിൽ മാറ്റിസ്ഥാപിക്കുക. |
| റിമോട്ട് കൺട്രോൾ പ്രവർത്തിക്കുന്നില്ല | Dead batteries, obstruction between remote and projector, incorrect angle. | Replace batteries. Ensure clear line of sight to IR receiver. Point remote directly at the projector. |
9 സ്പെസിഫിക്കേഷനുകൾ
Key technical specifications for the InFocus P120 INL412 Multimedia Projector:
| ഫീച്ചർ | സ്പെസിഫിക്കേഷൻ |
|---|---|
| മോഡൽ നമ്പർ | P120 INL412 (Item model number: 7296144) |
| ഡിസ്പ്ലേ തരം | ഡി.എൽ.പി |
| നേറ്റീവ് റെസല്യൂഷൻ | 1280 x 800 |
| പരമാവധി ഡിസ്പ്ലേ റെസല്യൂഷൻ | 1280 x 800 |
| കണക്റ്റിവിറ്റി ടെക്നോളജി | USB (and other standard inputs like HDMI, VGA) |
| ഉൽപ്പന്ന അളവുകൾ | 5.25 x 0.31 x 1.66 ഇഞ്ച് |
| ഇനത്തിൻ്റെ ഭാരം | 6.6 പൗണ്ട് |
| നിർമ്മാതാവ് | ഫോക്കസിൽ |
10. വാറൻ്റിയും പിന്തുണയും
The InFocus P120 INL412 Multimedia Projector comes with a standard manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions, including warranty duration and coverage details. For technical support, service, or further inquiries, please visit the official InFocus support webസൈറ്റ് അല്ലെങ്കിൽ അവരുടെ ഉപഭോക്തൃ സേവന വിഭാഗവുമായി ബന്ധപ്പെടുക.
ഏറ്റവും കാലികമായ പിന്തുണാ വിവരങ്ങൾക്ക്, ദയവായി സന്ദർശിക്കുക: www.infocus.com/support