Daytech Panic Button Alarm System User Manual

1. ആമുഖം

The Daytech Panic Button Alarm System is designed to provide immediate alert capabilities for various security needs, including home care, business security, and emergency situations. This system features a loud 120dB siren with a flashing strobe light, activated by wireless panic buttons or remote controls. It is suitable for indoor and outdoor use, offering reliable performance with a built-in battery for power outagഇ സംരക്ഷണം.

2. പാക്കേജ് ഉള്ളടക്കം

നിങ്ങളുടെ പാക്കേജിൽ എല്ലാ ഘടകങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കുക:

• 1 x Strobe Siren Alarm Receiver
• 5 x Remote Panic Buttons
• 2 x Call Buttons (Square type)
• Power Adapter for Siren
• മൗണ്ടിംഗ് ഹാർഡ്‌വെയർ (സ്ക്രൂകൾ, ആങ്കറുകൾ)
• ഉപയോക്തൃ മാനുവൽ (ഈ പ്രമാണം)

ചിത്രം: കഴിഞ്ഞുview of the Daytech Panic Button Alarm System components, showing the siren, a square call button, and a remote control.

3 പ്രധാന സവിശേഷതകൾ

• Wireless Outdoor/Indoor Siren: Produces a 120dB sound and flashing strobe light upon activation.
• വിപുലീകരിച്ച ശ്രേണി: Call buttons and receiver operate up to 330 feet in open areas, 130 feet with obstacles. Remote controls have an operating range of 65 feet to the receiver.
• പവർ ഓtagഇ സംരക്ഷണം: Features a built-in battery providing approximately 10 hours of standby time, ensuring continuous operation during power interruptions.
• Waterproof Panic Button: The panic buttons are waterproof, allowing installation in areas like washing rooms or near bedsides.
• Cancel/OFF Function: Allows users to deactivate the alarm using a dedicated cancel button on the call unit or the OFF button on the remote.
• എളുപ്പമുള്ള സജ്ജീകരണം: Units are pre-paired from the factory for immediate use.
• വികസിപ്പിക്കാവുന്ന സിസ്റ്റം: One siren can be paired with up to 8 transmitters (including call buttons and remote controls).

4. സജ്ജീകരണ നിർദ്ദേശങ്ങൾ

4.1 പ്രാരംഭ പവർ-അപ്പ്

1. ബോക്സിൽ നിന്ന് എല്ലാ ഘടകങ്ങളും അൺപാക്ക് ചെയ്യുക.
2. Plug the siren alarm receiver into a standard electrical outlet. The unit will emit a short sound to indicate it is powered on.
3. The system is pre-paired for immediate use. Test the system by pressing a panic button or remote to ensure the siren activates.

Image: The Daytech siren alarm plugged into a wall outlet, indicating power connection.

4.2 Pairing Additional Transmitters (Call Buttons/Remotes)

The siren can be paired with up to 8 transmitters. Follow these steps to pair new devices:

1. Locate the "Set Button" on the back of the siren receiver.
2. Press and hold the "Set Button" until the siren emits a short beep, indicating it is in pairing mode.
3. Within 10 seconds, press the "CALL" button on the new call button or the "ON" button on the new remote control.
4. The siren will emit another beep to confirm successful pairing.
5. Repeat for any additional transmitters.
6. To exit pairing mode, wait 10 seconds without pressing any transmitter, or press the "Set Button" again.

Image: Close-up of the back of the siren unit, highlighting the "Set Button" for pairing.

4.3 Mounting the Call Buttons

The call buttons can be fixed to a wall or placed on a flat surface.

• For wall mounting, use the provided screws and anchors. Ensure the button is easily accessible in an emergency.
• The waterproof design allows installation in bathrooms or other areas where moisture may be present.

Image: A panic button being tested with water spray, demonstrating its waterproof feature.

5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

5.1 Activating the Alarm

• Using a Call Button: Press the large "CALL" button on the square call unit. This will send a signal to the siren, activating the alarm sound and flashing lights.
• Using a Remote Control: Press the "ON" button on the remote control. This will activate the siren.

Image: A hand pressing the call button, illustrating alarm activation.

5.2 Deactivating the Alarm

• Using a Call Button: Press the small "CANCEL" button on the square call unit. This will silence the siren.
• Using a Remote Control: Press the "OFF" button on the remote control. This will deactivate the siren.

Image: A hand pressing the "OFF" key on a remote control to cancel the alarm.

5.3 പവർ ഔtagഇ പ്രവർത്തനം

The siren receiver includes a built-in battery that provides approximately 10 hours of standby power. In the event of a power outage, the system will automatically switch to battery power, ensuring continued operation.

Image: Illustration showing the siren alarm operating on its built-in battery during a power outage, with a 10-hour standby time.

6. പരിപാലനം

6.1 Battery Renewal for Call Units

The call units (panic buttons) are powered by a 1*23A 12V battery. When the battery is low, the unit's performance may degrade.

1. Carefully open the call unit casing using a small flat-head screwdriver or similar tool.
2. Remove the old 1*23A 12V battery.
3. Insert a new 1*23A 12V battery, ensuring correct polarity.
4. സി അടയ്ക്കുകasinഗ്രാം സുരക്ഷിതമായി.

Image: Diagram illustrating the internal components of the call button and the 1*23A 12V battery.

6.2 വൃത്തിയാക്കൽ

Wipe the surfaces of the siren and transmitters with a soft, dry cloth. Avoid using abrasive cleaners or solvents.

7. പ്രശ്‌നപരിഹാരം

8 സ്പെസിഫിക്കേഷനുകൾ

• ബ്രാൻഡ്: Daytech
• മോഡൽ നമ്പർ: Model 1 (JH003 8-2)
• ഊർജ്ജ സ്രോതസ്സ്: Battery Powered (Siren has built-in battery for backup)
• നിയന്ത്രണ രീതി: റിമോട്ട്
• ശബ്ദ നില: 120 ഡെസിബെൽ
• Maximum Range (Call Button to Siren): 330 Feet (open areas), 130 Feet (with obstacles)
• Maximum Range (Remote to Siren): 65 അടി
• മൗണ്ടിംഗ് തരം: Door Mount (for siren), Wall Mount/Surface (for call buttons)
• UPC: 762102193270

Image: Detailed diagram showing the dimensions and key features of the siren, call button, and remote control.

9. വാറൻ്റിയും പിന്തുണയും

Daytech products are covered by a manufacturer's warranty. For specific warranty details, technical support, or customer service inquiries, please refer to the contact information provided with your purchase or visit the official Daytech webസൈറ്റ്.

നിർമ്മാതാവ്: Daytech co.,Ltd.