ഫാരെക്സൺ ഇലക്ട്രിക് സ്റ്റാൻഡിംഗ് ഡെസ്ക് ഉപയോക്തൃ മാനുവൽ

1. ഉൽപ്പന്നം കഴിഞ്ഞുview

The farexon Electric Standing Desk is designed to provide a versatile and ergonomic workspace, allowing users to easily switch between sitting and standing positions. This model features a 55 x 24 inch desktop in Oak Grey, equipped with an electric lifting system, memory presets, and anti-collision technology for safe and convenient operation. It is suitable for various environments including home offices, study rooms, and commercial settings.

Figure 1.1: The farexon Electric Standing Desk in an office setup, showcasing its spacious desktop and integrated features like the mouse pad and headphone hook.

2 സുരക്ഷാ വിവരങ്ങൾ

Please read all safety instructions carefully before assembly and operation to prevent injury or damage to the product. Keep this manual for future reference.

• Ensure anti-collision technology is enabled during operation to prevent injuries or damage. The desk will move approximately 2cm in the opposite direction if an obstacle is detected during height adjustment.
• Verify that the desk meets U.S. federal and state safe air standards for reduced formaldehyde and VOC emissions.
• Do not place excessive weight on the desk. The maximum recommended weight is 178 pounds.
• ജോലി സമയത്ത് കുട്ടികളെയും വളർത്തുമൃഗങ്ങളെയും മേശയിൽ നിന്ന് അകറ്റി നിർത്തുക.
• Ensure all cables are properly managed to avoid entanglement or damage during height adjustments.
• നൽകിയിരിക്കുന്ന പവർ അഡാപ്റ്ററും ഘടകങ്ങളും മാത്രം ഉപയോഗിക്കുക.

3. പാക്കേജ് ഉള്ളടക്കം

Before beginning assembly, please ensure all components listed below are present and undamaged. If any parts are missing or damaged, contact customer support immediately.

• Desktop (Oak Grey, 55 x 24 inches)
• Electric Lifting Columns (2 pcs)
• Desk Feet/Bases (2 pcs)
• LED ഡിസ്പ്ലേ ഉള്ള കൺട്രോൾ പാനൽ
• പവർ അഡാപ്റ്ററും കേബിളും
• Large Mouse Pad (36 x 16 inches)
• Rolling Wheels (4 pcs, lockable)
• Foot Pads (4 pcs, non-slip)
• Headphone Hooks (2 pcs)
• Wire Collecting Hole Cover
• അസംബ്ലി ഹാർഡ്‌വെയർ (സ്ക്രൂകൾ, ബോൾട്ടുകൾ മുതലായവ)
• അസംബ്ലി ഉപകരണങ്ങൾ (അലൻ റെഞ്ച്, മുതലായവ)
• ഉപയോക്തൃ മാനുവൽ (ഈ പ്രമാണം)

Figure 3.1: Key components and features of the desk, such as the wire collecting hole, rolling wheels, protective edge, and metal headphone hooks.

4. അസംബ്ലി നിർദ്ദേശങ്ങൾ

Assembly typically requires two people. Follow the steps below. A detailed installation video is also available for visual guidance.

1. ജോലിസ്ഥലം തയ്യാറാക്കുക: Clear a spacious area for assembly. Lay down a soft cloth or cardboard to protect the desktop from scratches.
2. ഡെസ്ക്ടോപ്പിലേക്ക് ലിഫ്റ്റിംഗ് കോളങ്ങൾ ഘടിപ്പിക്കുക: Carefully place the desktop upside down. Align the electric lifting columns with the pre-drilled holes on the underside of the desktop and secure them using the provided screws.
3. Install Desk Feet/Bases: Attach the desk feet to the bottom of the lifting columns. Decide whether to install the rolling wheels or the non-slip foot pads. The wheels offer mobility, while the foot pads provide stationary stability. Secure your chosen option with the appropriate hardware.
4. നിയന്ത്രണ പാനലും മോട്ടോറും ബന്ധിപ്പിക്കുക: Mount the control panel to the underside of the desktop in the designated area. Connect the motor cables from the lifting columns to the control panel, ensuring a secure fit. Connect the power adapter to the control panel.
5. ആക്‌സസറികൾ ഇൻസ്റ്റാൾ ചെയ്യുക: Attach the headphone hooks to the desired location on the underside of the desk. Insert the wire collecting hole cover into the desktop opening.
6. മേശ മറിക്കുക: സഹായത്തോടെ, കൂട്ടിച്ചേർത്ത മേശ ശ്രദ്ധാപൂർവ്വം നേരെ മറിക്കുക.
7. Initial Power-Up and Calibration: Plug the power cable into a wall outlet. The desk may perform an initial calibration cycle. Follow any on-screen prompts on the LED display.

Figure 4.1: A fully assembled farexon Electric Standing Desk, ready for use in a home office environment.

5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The farexon Electric Standing Desk features an intuitive control panel for easy height adjustment and memory functions.

5.1. നിയന്ത്രണ പാനൽ പ്രവർത്തനങ്ങൾ

Figure 5.1: The smart LED controller with its various buttons and display.

• LED ഡിസ്പ്ലേ: Shows the current height of the desk in inches.
• മുകളിലേക്കും താഴേക്കും ഉള്ള അമ്പടയാളങ്ങൾ (^ / v): Press to adjust the desk height incrementally. Hold to continuously move the desk up or down.
• Memory Buttons (1, 2, 3, 4): These buttons allow you to save and recall up to four preferred height settings.

5.2. മെമ്മറി പ്രീസെറ്റുകൾ സജ്ജീകരിക്കുന്നു.

1. മുകളിലേക്കും താഴേക്കുമുള്ള അമ്പടയാളങ്ങൾ ഉപയോഗിച്ച് നിങ്ങൾക്ക് ആവശ്യമുള്ള ഉയരത്തിലേക്ക് ഡെസ്ക് ക്രമീകരിക്കുക.
2. Press and hold one of the Memory Buttons (1, 2, 3, or 4) until the LED display flashes or beeps, indicating the height has been saved.
3. To recall a saved height, simply press the corresponding Memory Button (1, 2, 3, or 4). The desk will automatically move to the saved position.

5.3. Anti-Collision Technology

The desk is equipped with an anti-collision system to prevent damage or injury. If the desk encounters an obstacle during height adjustment, it will automatically stop and reverse approximately 2cm. This feature is designed to protect both the desk and its surroundings.

Figure 5.2: The desk's quiet operation and anti-collision feature ensure smooth and safe height adjustments.

6. പരിപാലനം

Regular maintenance will help prolong the life and performance of your farexon Electric Standing Desk.

• വൃത്തിയാക്കൽ: ഡെസ്ക്ടോപ്പും ഫ്രെയിമും ഒരു സോഫ്റ്റ്, ഡി ക്ലീനർ ഉപയോഗിച്ച് തുടയ്ക്കുക.amp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the finish. Ensure the desk is unplugged before cleaning electrical components.
• കേബിൾ മാനേജുമെന്റ്: Periodically check and organize cables to prevent tangling or interference with the lifting mechanism.
• മോട്ടോർ പരിശോധന: While the motor is designed for durability (tested for 50,000 cycles), avoid overloading the desk. Listen for unusual noises during operation, which may indicate an issue.
• Wheel/Foot Pad Check: If using wheels, ensure they are clean and roll smoothly. If using foot pads, ensure they are securely attached and provide stable support.

Figure 6.1: The robust motor designed for long-term reliability and safety features.

7. പ്രശ്‌നപരിഹാരം

If you encounter any issues with your farexon Electric Standing Desk, refer to the following common problems and solutions. If the problem persists, contact customer support.

8. ഉൽപ്പന്ന സവിശേഷതകൾ

Figure 8.1: The adjustable height range of the desk accommodates various user preferences and postures.

9. വാറൻ്റിയും പിന്തുണയും

farexon is committed to providing high-quality products and excellent customer service.

• വാറൻ്റി: This product comes with a Limited Warranty. Please refer to the warranty card included in your package for specific terms and conditions.
• റിട്ടേണുകൾ: The product is eligible for 30-day easy returns from the date of purchase.
• ഉപഭോക്തൃ പിന്തുണ: For any questions, assistance with assembly, troubleshooting, or warranty claims, please contact the farexon customer service team. Contact information can typically be found on the product packaging or the official farexon webസൈറ്റ്.

Figure 9.1: farexon's dedicated customer support team is available to assist you.