HANSSHOW Tesla Head Up Display (Model HUD Screen-9") Instruction Manual

1. ഉൽപ്പന്നം കഴിഞ്ഞുview

The HANSSHOW Tesla Head Up Display is a 9-inch IPS touch screen designed to integrate seamlessly into Tesla Model 3 and Model Y vehicles. It provides essential driving information, supports wireless CarPlay and Android Auto, and offers various control methods including original car steering wheel buttons and touch screen input. This display is compatible with both AMD and Intel versions of the Tesla infotainment processor.

Figure 1: HANSSHOW Head Up Display integrated into a Tesla dashboard.

2. ബോക്സിൽ എന്താണുള്ളത്?

Upon unboxing your HANSSHOW Head Up Display, you should find the following components:

• 9-inch IPS Touch Screen Display: The main unit for displaying information and interaction.
• Wiring Harnesses: Includes specific harnesses for Intel Atom CPU and AMD Ryzen CPU versions of Tesla vehicles.
• Plastic Pry Bar: For safely removing interior trim pieces during installation.
• Metal Backing Plate: Used for securing the display to the dashboard vents.
• Six Screws: For attaching the backing plate to the display and dashboard.
• ഓപ്പറേഷൻ ഗൈഡ്: A printed manual detailing device usage (installation guide available online).

ചിത്രം 2: ഉൽപ്പന്ന പാക്കേജിംഗിൽ ഉൾപ്പെടുത്തിയിരിക്കുന്ന എല്ലാ ഘടകങ്ങളും.

3 സ്പെസിഫിക്കേഷനുകൾ

• സ്ക്രീൻ വലിപ്പം: 9 ഇഞ്ച്
• റെസലൂഷൻ: 1920 x 720
• ഡിസ്പ്ലേ തരം: ഐപിഎസ് ടച്ച് സ്‌ക്രീൻ
• കണക്റ്റിവിറ്റി: USB, Bluetooth, WiFi
• അനുയോജ്യമായ ഉപകരണങ്ങൾ: Mobile Phone (for CarPlay/Android Auto)
• പിന്തുണയ്ക്കുന്ന സവിശേഷതകൾ: Wireless CarPlay, Wireless/Wired Android Auto, CarLife
• ഓപ്പറേറ്റിംഗ് സിസ്റ്റം: ലിനക്സ് സിസ്റ്റം
• പ്രത്യേക സവിശേഷതകൾ: Blue-light filtering technology, Day/Night modes, Steering wheel button control, Voice control (Mandarin Chinese only)
• ഇനത്തിൻ്റെ ഭാരം: 2.86 പൗണ്ട്
• പാക്കേജ് അളവുകൾ: 10.79 x 5.87 x 4.61 ഇഞ്ച്

4. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

Proper installation is crucial for the optimal performance of your HANSSHOW Head Up Display. Please follow these steps carefully. It is recommended to watch the official installation video for visual guidance.

4.1 Identify Your Tesla's CPU Type

The wiring harness required depends on your Tesla's infotainment processor (CPU). To identify your CPU:

1. On your Tesla's main screen, navigate to Controls > Software.
2. ടാപ്പ് ചെയ്യുക അധിക വാഹന വിവരങ്ങൾ (usually in blue letters).
3. കണ്ടെത്തുക Infotainment Processor to see if it's ഇൻ്റൽ ആറ്റം or എഎംഡി റൈസൺ.

4.2 Power Down Your Tesla

Before beginning any electrical work, it is essential to power down your vehicle:

1. Open all car doors and pop the hood (frunk).
2. On your Tesla's main screen, navigate to Controls > Safety.
3. ടാപ്പ് ചെയ്യുക പവർ ഓഫ്. Confirm the power off.
4. Wait approximately 15 minutes until you hear a distinct click sound, indicating the car is fully powered down.
5. In the frunk, use a 10mm socket wrench to loosen and remove the negative terminal cable from the 12V battery. Secure the cable away from any metal objects.
6. For Model 3, lift the rear seat cushion to access and disconnect the high-voltagഇ കണക്റ്റർ.

4.3 Dashboard Disassembly

Carefully remove the dashboard trim pieces using the provided plastic pry bar:

1. Remove the side trim pieces on both the driver and passenger sides of the dashboard.
2. Gently lift the front edge of the dashboard panel to release it from its clips. Do this on both sides.
3. Angle the dashboard upwards and carefully lift the entire panel out.
4. On the passenger side, remove the panel underneath the glove box by popping out its five trim clips. Disconnect the two wires for the speaker and footwell light.
5. Remove the long trim piece that runs from the dash down along the door sill.

4.4 വയറിംഗ് കണക്ഷനുകൾ

Connect the appropriate wiring harness based on your CPU type:

1. Locate the main wiring harness connector behind the passenger side dashboard. This is typically the second plug from the right, next to the inside wall.
2. Carefully disconnect the existing car harness.
3. Connect the female end of the provided Y-harness to the car's original connector.
4. Connect the male end of the Y-harness to the now-empty port on the car.
5. For AMD Ryzen CPUs, run the additional power cable (red and black wires) through the car's front firewall and connect it to the 12V battery in the frunk.
6. Route the red and blue wires from the display through the dashboard vent holes. Use painter's tape to mark the 25th vent hole (for the left tab) and the 32nd vent hole (for the blue wire).
7. Insert the display's left-most tab into the marked 25th vent hole and push the display all the way in. Ensure wires are not pinched.
8. Attach the metal backing plate to the underside of the dashboard, aligning the holes with the display tabs. Insert and tighten the six screws.

4.5 വീണ്ടും കൂട്ടിച്ചേർക്കൽ

Reassemble the dashboard and trim pieces in reverse order of disassembly. Ensure all connections are secure and wires are neatly tucked away to prevent rattling.

5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Your HANSSHOW Head Up Display offers intuitive controls and various display modes.

5.1 ഡിസ്പ്ലേ മോഡുകളും തെളിച്ചവും

• The display supports Day and Night modes for optimal visibility in different lighting conditions.
• Brightness is automatically adjusted based on the main Tesla screen's brightness settings.
• The display features blue-light filtering technology to reduce eye strain during prolonged use.

Figure 3: Day and Night modes of the display, showing clear visibility in different lighting.

5.2 Smartphone Connection (CarPlay/Android Auto)

To connect your smartphone for wireless CarPlay or Android Auto:

1. In the system settings menu, choose your desired connection type: CarPlay, Display Mode (Normal or Full Screen).
2. On your smartphone, search for the Bluetooth ID BT-LINK ഉപകരണത്തിലേക്ക് കണക്റ്റുചെയ്യുക.
3. After approximately 10 seconds, your smartphone will prompt you to confirm using CarPlay/Android Auto.
4. ക്ലിക്ക് ചെയ്യുക സ്ഥിരീകരിക്കുക. CarPlay/Android Auto will automatically connect.

Figure 4: Smartphone connection guide for wireless CarPlay and Android Auto.

5.3 നിയന്ത്രണ രീതികൾ

• Original Car Steering Wheel Buttons: The display supports linkage adjustment and individual adjustment of the original car's steering wheel controls.
• ടച്ച് സ്‌ക്രീൻ നിയന്ത്രണം: Directly interact with the 9-inch IPS touch screen.
• ശബ്ദ നിയന്ത്രണം: Supports Mandarin Chinese voice commands.

6. പരിപാലനം

To ensure the longevity and optimal performance of your Head Up Display:

• Regularly clean the screen with a soft, lint-free cloth. Avoid harsh chemicals.
• എല്ലാ വയറിംഗ് കണക്ഷനുകളും സുരക്ഷിതമായി തുടരുന്നുവെന്ന് ഉറപ്പാക്കുക.
• തീവ്രമായ താപനിലയിലോ നേരിട്ടുള്ള സൂര്യപ്രകാശത്തിലോ ഉപകരണം ദീർഘനേരം തുറന്നുകാട്ടുന്നത് ഒഴിവാക്കുക.

7. പ്രശ്‌നപരിഹാരം

If you encounter issues with your HANSSHOW Head Up Display, consider the following:

• സ്ക്രീൻ ഓണാക്കുന്നില്ല: Verify all power connections are secure and the car's 12V battery is properly reconnected. Ensure the car was fully powered down and restarted correctly.
• കാർപ്ലേ/ആൻഡ്രോയിഡ് ഓട്ടോ കണക്ഷൻ പ്രശ്നങ്ങൾ: Double-check Bluetooth pairing and ensure the correct connection type is selected in the display's settings. Try restarting both the display (by powering off/on the car) and your smartphone.
• അലറുന്ന ശബ്ദങ്ങൾ: Ensure all wires are securely tucked away and not pinched. Use electrical tape or zip ties to secure loose wires if necessary.
• Screen Freezing/Restarting: This could indicate a software or power issue. Ensure all connections are firm. If the issue persists, check for available firmware updates.

8. ഫേംവെയർ അപ്ഡേറ്റുകൾ

Firmware updates can be applied via the USB-C port on the side of the display. Visit the HANSSHOW webഏറ്റവും പുതിയ ഫേംവെയറും നിങ്ങളുടെ ഉപകരണം എങ്ങനെ അപ്‌ഡേറ്റ് ചെയ്യാമെന്നതിനുള്ള നിർദ്ദേശങ്ങളും ലഭിക്കുന്നതിന് സൈറ്റ് സന്ദർശിക്കുക.

9. വാറൻ്റിയും പിന്തുണയും

For any installation questions or technical support, please refer to the QR code provided on the product packaging or contact HANSSHOW customer service via Amazon email or WhatsApp at +86 156 2278 2181.

Figure 5: QR code for installation video and support contact details.