പ്രധാനപ്പെട്ട സുരക്ഷാ വിവരങ്ങൾ
- Use only cold tap water. Do not filter hot water.
- സിസ്റ്റത്തിന് മുമ്പോ ശേഷമോ വേണ്ടത്ര അണുവിമുക്തമാക്കാതെ മൈക്രോബയോളജിക്കൽ സുരക്ഷിതമല്ലാത്തതോ ഗുണനിലവാരമില്ലാത്തതോ ആയ വെള്ളം ഉപയോഗിക്കരുത്.
- Keep the pitcher away from direct sunlight and heat sources.
- Wash all parts of the pitcher (except the filter) by hand with mild detergent. Do not use abrasive cleaners.
- ഫിൽട്ടർ ഡിഷ്വാഷർ സുരക്ഷിതമല്ല.
ഉൽപ്പന്നം കഴിഞ്ഞുview
The Brita Everyday Elite Water Filter Pitcher is designed to provide cleaner, great-tasting tap water by reducing various contaminants. It features a 10-cup capacity and a SmartLight filter indicator for convenient usage.
Image: The Brita Everyday Elite Water Filter Pitcher in black, shown with a blue Elite filter. The pitcher has a clear body and a black lid with a handle.
Image: A graphic illustrating the Brita Elite filter's capabilities, stating it reduces 5X contaminants including Chlorine, Lead, Microplastics, Select Pharmaceuticals & Pesticides, Mercury, and Cadmium.
സജ്ജമാക്കുക
- Wash Pitcher Components: Hand-wash the pitcher, lid, and reservoir with mild soap and water. Rinse thoroughly. Do not wash the filter with soap.
- ഫിൽറ്റർ തയ്യാറാക്കുക: Remove the Brita Elite filter from its packaging. Rinse the filter under cold tap water for 15 seconds.
- ഫിൽട്ടർ ചേർക്കുക: Insert the prepared filter into the reservoir by aligning the grooves and pressing down firmly until it clicks into place.
- പിച്ചർ കൂട്ടിച്ചേർക്കുക: Place the reservoir with the inserted filter into the pitcher. Secure the lid onto the pitcher.
- Initial Filter Flush: Fill the reservoir with cold tap water. Allow the water to filter through completely. Discard the first two pitchers of filtered water to flush out any carbon dust.
- Activate SmartLight Indicator: For Elite filters, press and hold the reset button on the lid for 6 seconds until the green light flashes. This indicates the filter life tracking has started.
Video: A demonstration of setting up the Brita Everyday Elite Water Filter Pitcher, including unpacking, inserting the filter, and filling with water. This video shows the ease of assembly and initial use.
പ്രവർത്തന നിർദ്ദേശങ്ങൾ
- കുടം നിറയ്ക്കൽ: Open the easy-fill lid and place the pitcher under cold tap water. Fill the reservoir to the maximum fill line. The water will filter through to the main pitcher body.
- വെള്ളം ഒഴിക്കൽ: Once the water has filtered, you can pour clean, filtered water from the pitcher.
- SmartLight Indicator: The SmartLight indicator on the lid will flash green, yellow, or red to indicate the filter's status. Green means good, yellow means it's time to order a new filter, and red means it's time to replace the filter.
Image: An illustration highlighting the key features of the Brita pitcher, such as the SmartFilter Alert on the lid, easy-fill lid, and the included Elite filter.
മെയിൻ്റനൻസ്
ഫിൽട്ടർ മാറ്റിസ്ഥാപിക്കൽ
Replace the Brita Elite water filter approximately every 6 months or after filtering 120 gallons of water. The SmartLight indicator will signal when a replacement is needed.
- പഴയ ഫിൽറ്റർ നീക്കം ചെയ്യുക: Lift the reservoir out of the pitcher and remove the old filter by pulling it upwards.
- പുതിയ ഫിൽറ്റർ തയ്യാറാക്കുക: Follow the preparation steps for a new filter as described in the Setup section (rinse under cold water for 15 seconds).
- പുതിയ ഫിൽറ്റർ ചേർക്കുക: Insert the new filter into the reservoir, ensuring a snug fit.
- റീസെറ്റ് ഇൻഡിക്കേറ്റർ: After replacing the filter, press and hold the reset button on the lid for 6 seconds until the green light flashes to reset the filter life tracker.
Image: The Brita Everyday Elite Water Filter Pitcher, showing the filter visible within the reservoir. This image helps visualize where the filter is located for replacement.
പിച്ചർ വൃത്തിയാക്കൽ
- Hand-wash all pitcher components (except the filter) with mild detergent.
- എല്ലാ സോപ്പ് അവശിഷ്ടങ്ങളും നീക്കം ചെയ്യാൻ നന്നായി കഴുകുക.
- Do not use abrasive cleaning agents or put any part of the pitcher in the dishwasher.
ട്രബിൾഷൂട്ടിംഗ്
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| സ്ലോ ഫിൽട്രേഷൻ | ഫിൽട്ടർ അടഞ്ഞുപോയി അല്ലെങ്കിൽ അതിന്റെ ഉപയോഗ കാലാവധി അവസാനിക്കാൻ പോകുന്നു. | Replace the filter. Ensure the filter was properly rinsed before first use. |
| Water has an unusual taste/odor | Filter needs replacement or was not properly flushed. | Discard the first two pitchers of filtered water. If problem persists, replace the filter. |
| SmartLight indicator not working | Battery issue or not reset properly. | Ensure the indicator was reset by holding the button for 6 seconds. If still not working, contact Brita customer support. |
| Black flecks in water | പുതിയ ഫിൽട്ടറിൽ നിന്നുള്ള കാർബൺ പൊടി. | This is normal for new filters. Discard the first two pitchers of filtered water. If flecks persist, re-rinse the filter. |
| Pitcher leaks | Lid or reservoir not properly seated. | Ensure the lid and reservoir are securely in place. Check for any cracks in the pitcher body. |
| Water not filtering | Filter not properly seated or clogged. | Remove and re-insert the filter, ensuring it is firmly seated. If still not filtering, replace the filter. |
| വെള്ളം പ്ലാസ്റ്റിക്കിന്റെ രുചിയാണ് | New pitcher plastic residue. | Wash all pitcher components thoroughly with mild soap and water before first use. Repeat if taste persists. |
| Water tastes like chlorine | Filter not effectively reducing chlorine. | Ensure filter is properly seated and reset. If taste persists, replace the filter. |
| Water tastes metallic | Filter not effectively reducing metals. | Ensure filter is properly seated and reset. If taste persists, replace the filter. |
| വെള്ളം മേഘാവൃതമാണ് | Air bubbles or sediment. | This is usually harmless air bubbles. Let the water sit for a few minutes. If sediment persists, replace the filter. |
| Pitcher is discolored | Staining from beverages or food. | Clean immediately after use. For stubborn stains, try a mixture of baking soda and water. |
| Filter indicator light not changing | Indicator malfunction. | Try resetting the indicator again. If it remains unresponsive, contact Brita customer support. |
| Water flow too fast | Filter not properly seated or defective. | Remove and re-insert the filter firmly. If flow remains too fast, replace the filter. |
| Water tastes like dirt/earthy | Filter is saturated or water source issue. | Replace the filter. If the taste persists, consider testing your tap water quality. |
സ്പെസിഫിക്കേഷനുകൾ
- ബ്രാൻഡ്: ബ്രിട്ട
- മോഡലിൻ്റെ പേര്: Everyday Elite
- മോഡൽ നമ്പർ: OB46/OB06
- ശേഷി: 10 Cups (approx. 2.36 liters)
- മെറ്റീരിയൽ: BPA-free Polystyrene
- ഉൽപ്പന്ന അളവുകൾ: 10.95"L x 10.83"W x 6.06"H
- ഇനത്തിൻ്റെ ഭാരം: 2.14 പൗണ്ട്
- പ്രത്യേക സവിശേഷത: SmartLight Filter Change Indicator
- ഫിൽട്ടർ തരം: Brita Elite Filter (included)
- ഫിൽട്ടർ ലൈഫ്: Approximately 6 months or 120 gallons
- മലിനീകരണം കുറയ്ക്കൽ: Reduces 99% of Lead, Chlorine (taste and odor), Cadmium, Mercury, Benzene, Asbestos, and more.
- ഇൻസ്റ്റലേഷൻ തരം: ഫ്രീസ്റ്റാൻഡിംഗ്
- ഊർജ്ജ സ്രോതസ്സ്: മാനുവൽ ഓപ്പറേഷൻ
- പിന്തുണയ്ക്കുന്ന ജലത്തിന്റെ TDS ലെവൽ പരമാവധി (PPM): 500
- താപനില റേറ്റിംഗ്: 32-85 ഡിഗ്രി ഫാരൻഹീറ്റ്
വാറൻ്റി & പിന്തുണ
For warranty information or customer support, please refer to the official Brita webസൈറ്റിൽ ബന്ധപ്പെടുകയോ അവരുടെ ഉപഭോക്തൃ സേവനവുമായി നേരിട്ട് ബന്ധപ്പെടുകയോ ചെയ്യുക. ഏതെങ്കിലും വാറന്റി ക്ലെയിമുകൾക്കായി നിങ്ങളുടെ വാങ്ങലിന്റെ തെളിവ് സൂക്ഷിക്കുക.
Brita Elite filters are compatible with all Brita pitchers and dispensers except Stream models.
Note: Using non-Brita certified filters may void your warranty and may not provide the same level of contaminant reduction.
Image: A graphic emphasizing Brita's certifications, stating all products are certified by the Water Quality Association and filters meet NSF/ANSI standards 53, 42, and 401.