Jasco V-630 iRM UV-Vis Spectrophotometer User Manual

1. ആമുഖം

The Jasco V-630 iRM UV-Vis Spectrophotometer is a high-performance analytical instrument designed for precise absorbance and transmittance measurements across the ultraviolet and visible spectrum (190-1100nm). Featuring an intuitive touch panel interface, this device is suitable for a wide range of applications in research, quality control, and educational settings.

പ്രധാന സവിശേഷതകളിൽ ഇവ ഉൾപ്പെടുന്നു:

• Jasco V-630 iRM UV-Vis Spectrophotometer with Touch Panel 190-1100nm
• Manufacturer Model Number: V-630
• Manufacturer Name: Jasco

ചിത്രം 1.1: മുൻഭാഗം view of the Jasco V-630 iRM UV-Vis Spectrophotometer, showing the main unit with the sample compartment on the left and the integrated touch panel on the right.

2. സജ്ജീകരണം

2.1 അൺപാക്കിംഗും പരിശോധനയും

Carefully remove the spectrophotometer and all accessories from the packaging. Inspect for any signs of damage during transit. Retain all packaging materials for future transport or storage.

2.2 പ്ലേസ്മെൻ്റ്

Place the instrument on a stable, level surface away from direct sunlight, excessive vibration, and strong magnetic fields. Ensure adequate ventilation around the unit to prevent overheating. Maintain a clear space of at least 10 cm around all sides.

2.3 പവർ കണക്ഷൻ

Connect the provided power cord to the instrument's power inlet and then to a grounded electrical outlet. Ensure the power supply matches the instrument's voltagഇ ആവശ്യകതകൾ.

2.4 പ്രാരംഭ പവർ-ഓൺ

Press the power button located on the front panel. The system will initiate a self-test and calibration sequence. Allow the instrument to warm up for at least 15-30 minutes for optimal performance and stability.

ചിത്രം 2.1: ക്ലോസപ്പ് view of the Jasco V-630 iRM Spectrophotometer's side panel, showing the product label with model number and manufacturer information.

3. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

3.1 Touch Panel Interface

The V-630 iRM features an integrated touch panel for all operational controls and data display. Navigate through menus by tapping the corresponding icons or text. Use the stylus provided for precise input if necessary.

3.2 എസ്ample തയ്യാറാക്കൽ

നിങ്ങളുടെ എസ് തയ്യാറാക്കുകamples according to standard laboratory procedures. Ensure cuvettes are clean, free of scratches, and compatible with the desired wavelength range. For UV measurements, quartz cuvettes are recommended.

3.3 അളക്കൽ നടപടിക്രമങ്ങൾ

1. From the main menu, select the desired measurement mode (e.g., Absorbance, Transmittance, Quantitative Analysis).
2. Follow the on-screen prompts to set parameters such as wavelength range, scan speed, and data interval.
3. Insert a blank (reference) cuvette into the sample compartment and perform a baseline correction or zeroing as prompted.
4. Replace the blank with your sampലെ cuvette.
5. Initiate the measurement. The results will be displayed on the touch panel.

3.4 Data Analysis and Export

The instrument allows for basic on-board data analysis. Data can typically be saved to internal memory or exported via USB or network connection (if available) for further analysis on external software.

Figure 3.1: Composite image showing the Jasco V-630 iRM's touch panel interface with various menu options and a view യുടെample compartment designed for cuvettes.

4. പരിപാലനം

4.1 വൃത്തിയാക്കൽ

ഉപകരണത്തിന്റെ പുറംഭാഗം പതിവായി മൃദുവായ, ഡി-ക്ലാസ്സർ ഉപയോഗിച്ച് വൃത്തിയാക്കുക.amp cloth. For the touch panel, use a screen-specific cleaner and a microfiber cloth. Avoid abrasive cleaners or solvents. Keep the sample compartment clean and free of spills.

4.2 കാലിബ്രേഷൻ

Periodic calibration using certified reference materials is recommended to ensure measurement accuracy. Refer to the instrument's on-screen calibration menu or consult a qualified service technician for advanced calibration procedures.

4.3 സംഭരണം

When not in use for extended periods, power off the instrument and cover it with a dust cover to protect it from environmental contaminants. Store in a dry, temperature-controlled environment.

5. പ്രശ്‌നപരിഹാരം

For issues not listed here or if solutions do not resolve the problem, please contact Jasco customer support.

6 സ്പെസിഫിക്കേഷനുകൾ

• നിർമ്മാതാവ്: ജാസ്കോ
• ഭാഗം നമ്പർ: വി-630
• ASIN: B0B7X37887
• Amazon.co.jp-യിൽ ആദ്യം ലഭ്യമാകുന്ന തീയതി: ജൂലൈ 27, 2022
• തരംഗദൈർഘ്യ ശ്രേണി: 190-1100nm
• ഇൻ്റർഫേസ്: ടച്ച് പാനൽ

7. വാറൻ്റിയും പിന്തുണയും

This product is covered by the manufacturer's standard warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or contact Jasco directly. Support for the Jasco V-630 iRM Spectrophotometer is available through authorized service centers and the manufacturer's customer service channels.

For technical assistance, service requests, or to inquire about replacement parts, please visit the official Jasco webസൈറ്റ് അല്ലെങ്കിൽ അവരുടെ ഉപഭോക്തൃ പിന്തുണാ ലൈനുമായി ബന്ധപ്പെടുക.