ALEASHA Widespread Bathroom Sink Faucet with Pop-Up Drain

ആമുഖം

This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your ALEASHA Widespread Bathroom Sink Faucet. Please read this manual thoroughly before installation and keep it for future reference. Proper installation and care will ensure optimal performance and longevity of your faucet.

ഉൽപ്പന്നം കഴിഞ്ഞുview

The ALEASHA Widespread Bathroom Sink Faucet is designed for 3-hole installations, offering a blend of modern aesthetics and reliable functionality. It features a matte black finish, durable stainless steel construction, and a lead-free design. The faucet includes a pop-up drain with overflow for convenience.

പ്രധാന സവിശേഷതകൾ:

• ഉയർന്ന നിലവാരമുള്ള നിർമ്മാണം: Matte black finish, anti-scratch and rustproof. Made of stainless steel and zinc with brass O-rings.
• Drip-Free Reliability: Ceramic valves tested for 500,000 on & off cycles.
• വ്യാപകമായ രൂപകൽപ്പന: Fits 6-16 inch widespread bathroom sinks with 3 holes.
• സുപ്പീരിയർ എയറേറ്റർ: Includes a 1.2 GPM aerator (California Energy Commission standards compliant) for dense, soft, splash-free water flow, saving 35% water. A 2.2 GPM replacement aerator is also included.
• പോപ്പ്-അപ്പ് ഡ്രെയിൻ: Comes with a pop-up drain with overflow.
• ദ്രുത ഇൻസ്റ്റാളേഷൻ: Pre-installed water supply hoses on hot & cold handles for simplified setup.

പാക്കേജ് ഉള്ളടക്കം:

ഇൻസ്റ്റാളേഷൻ ആരംഭിക്കുന്നതിന് മുമ്പ് എല്ലാ ഘടകങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കുക.

Image: All components included in the box, such as the faucet body, handles, supply hoses, pop-up drain, and installation guide.

1. ബാത്ത്റൂം ഫ്യൂസറ്റ് അസംബ്ലി
2. Hot & Cold Handles
3. Water Supply Hoses (pre-installed)
4. ഓവർഫ്ലോ ഉള്ള പോപ്പ്-അപ്പ് ഡ്രെയിൻ
5. Aerator (1.2 GPM and 2.2 GPM replacement)
6. Mounting Hardware (gaskets, nuts, screws)
7. ഇൻസ്റ്റലേഷൻ ഗൈഡ്
8. ടെഫ്ലോൺ ടേപ്പ്
9. ജോടി കയ്യുറകൾ

ഉൽപ്പന്ന അളവുകൾ:

Image: Diagram showing the dimensions of the faucet components, including spout height (3.3 inches), spout reach (5 inches), handle height (2.6 inches), and pop-up drain dimensions.

The faucet is designed for 3-hole installations with a mounting hole size of 1.1-1.5 inches and a maximum deck thickness of 1.4 inches. The widespread design accommodates 6-16 inch spacing between handle centers.

സ്പെസിഫിക്കേഷനുകൾ

സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

നിങ്ങൾ ആരംഭിക്കുന്നതിന് മുമ്പ്:

• Turn off the main water supply before starting any work.
• എളുപ്പത്തിൽ ആക്‌സസ് ചെയ്യുന്നതിനായി സിങ്കിനു കീഴിലുള്ള ഭാഗം വൃത്തിയാക്കുക.
• Ensure your sink has 3 holes and the dimensions match the faucet specifications.
• Gather all necessary tools: adjustable wrench, screwdriver, plumber's putty or silicone sealant, flashlight.

ഫ്യൂസറ്റ് ഇൻസ്റ്റാളേഷൻ:

1. Insert the faucet body and handles into the corresponding mounting holes on the sink deck. Ensure the hot (red dot) and cold (blue dot) handles are correctly positioned.
2. From underneath the sink, secure the faucet body and handles using the provided gaskets, metal plates, and mounting nuts. Tighten securely but do not overtighten.
3. Connect the pre-installed water supply hoses from the handles to the central faucet body using the "Y" hose connector. This is a "Fast Click" connection and does not require Teflon tape or additional gaskets.
4. Connect the hot and cold water supply lines from your angle stops to the corresponding hot (red) and cold (blue) marked hoses extending from the handles. Use Teflon tape on threaded connections if necessary, but typically not needed for braided supply lines with rubber washers.

Image: Illustration of the quick connect design for easy installation of the faucet and its water supply lines without complex plumbing.

Pop-Up Drain Installation:

1. Ensure the sink has an overflow hole for proper function of the included pop-up drain.
2. Slide the top washer up to the underside of the drain flange.
3. Insert the drain flange and washer into the sink drain hole from above.
4. From underneath the sink, secure the drain with the black gasket washer and nut. Hand-tighten first, then use a wrench for a snug fit. Do not overtighten.
5. Connect the P-trap to the bottom of the pop-up drain assembly.

Image: Close-up of the pop-up drain mechanism, illustrating its design for quick drainage and anti-clogging properties, suitable for sinks with overflow holes.

അവസാന ഘട്ടങ്ങൾ:

• Once all connections are made, slowly turn on the main water supply.
• Check for any leaks at all connection points. Tighten connections if necessary.
• Remove the aerator from the spout and turn on both hot and cold water to flush out any debris from the lines. Run water for a few minutes.
• Turn off the water, re-install the aerator, and test the faucet for proper operation.

ഓപ്പറേഷൻ

ജലപ്രവാഹവും താപനിലയും നിയന്ത്രിക്കൽ:

Your ALEASHA widespread faucet features two lever handles for precise control over water flow and temperature.

• തണുത്ത വെള്ളം: The handle marked with a blue dot controls the cold water. Turn the handle counter-clockwise to increase cold water flow.
• ചൂടുവെള്ളം: The handle marked with a red dot controls the hot water. Turn the handle counter-clockwise to increase hot water flow.
• Temperature Mixing: Adjust both handles simultaneously to achieve your desired water temperature.
• ജലപ്രവാഹം: The further you turn the handles, the greater the water flow.

Image: Visual guide showing the 90-degree rotation of the hot and cold handles for precise temperature control.

മെയിൻ്റനൻസ്

പൈപ്പ് വൃത്തിയാക്കൽ:

To maintain the matte black finish and prevent water spots, clean your faucet regularly.

• ഒരു സോഫ്റ്റ് ഉപയോഗിക്കുക, ഡിamp തുണിയും വീര്യം കുറഞ്ഞ സോപ്പും.
• അബ്രാസീവ് ക്ലീനറുകൾ, കഠിനമായ രാസവസ്തുക്കൾ, അല്ലെങ്കിൽ സ്‌കോറിംഗ് പാഡുകൾ എന്നിവ ഒഴിവാക്കുക, കാരണം ഇവ ഫിനിഷിന് കേടുവരുത്തും.
• Wipe the faucet dry after each use to prevent water spots.

Image: Highlights the corrosion-resistant finish and the integrated water-saving aerator, emphasizing the faucet's quality components.

എയറേറ്റർ പരിപാലനം:

Periodically clean the aerator to remove mineral buildup and maintain optimal water flow.

1. സ്പൗട്ടിന്റെ അഗ്രത്തിൽ നിന്ന് എയറേറ്റർ അഴിച്ചുമാറ്റുക.
2. Disassemble the aerator components and rinse them under running water.
3. Use a soft brush or toothpick to remove any stubborn mineral deposits.
4. എയറേറ്റർ വീണ്ടും കൂട്ടിച്ചേർക്കുക, അത് സ്പൗട്ടിലേക്ക് തിരികെ സ്ക്രൂ ചെയ്യുക.

ചിത്രം: പൊട്ടിത്തെറിച്ച ഒരു view demonstrating the removable Neoperl aerator, configured with both 1.2 GPM and 2.2 GPM options, for easy cleaning and flow adjustment.

ട്രബിൾഷൂട്ടിംഗ്

If you encounter any issues with your faucet, refer to the table below for common problems and their solutions.

വാറൻ്റി & പിന്തുണ

ALEASHA stands behind the quality of its products. This faucet comes with a 5 വർഷത്തെ വാറൻ്റി against manufacturing defects. We also offer a 30 ദിവസത്തെ സൗജന്യ റിട്ടേൺ പോളിസി.

For any questions, technical assistance, or warranty claims, please contact ALEASHA customer service:

• ഇമെയിൽ: support@aleasha.com (ഉദാampലെ)
• ഫോൺ: 1-800-XXX-XXXX (ഉദാ.ampലെ)
• Webസൈറ്റ്: www.aleasha.com (ഉദാampലെ)

Please have your model number (2323100B-US-C) and purchase date ready when contacting support.