1. ആമുഖവും ഉൽപ്പന്നവും കഴിഞ്ഞുview
The SUNLU PLA Matte 3D Printer Filament is designed to produce prints with a beautiful matte, low-gloss, and smooth finish, effectively concealing layer lines for a frosted texture. This filament is engineered for high precision and consistency, ensuring reliable and high-quality 3D printing.
- Smooth Matte Finish: Achieves a frosted texture that hides layer lines.
- Neatly Wound: Advanced winding technology prevents knots and tangles, improving printing efficiency.
- Dimensional Accuracy & Consistency: Features a dimensional accuracy of +/- 0.02mm, with minimum tolerance and low warping for stable prints and good layer bonding.
- No Clogging & No Bubble: Manufactured in a dry, dust-free environment and vacuum-sealed to prevent moisture absorption, reducing clogging and bubbling problems.
ഉൽപ്പന്നം കഴിഞ്ഞുview വീഡിയോ
വീഡിയോ 1: ഒരു ഓവർview of SUNLU 3D Filament, highlighting its features and benefits.
2. സജ്ജീകരണം
2.1 പായ്ക്ക് ചെയ്യലും തയ്യാറാക്കലും
Upon receiving your SUNLU PLA Matte filament, ensure the vacuum-sealed packaging is intact. Open the package carefully and remove the filament spool. It is recommended to store unused filament in its sealed bag with desiccant to prevent moisture absorption.
2.2 Spool Installation (Reusable Spool)
Some SUNLU filaments come with a reusable spool design. To install, find the 'Line 1', 'unlock', and 'lock' marks on the spool. Align the marks to unlock, install the filament, and then turn 'Line 1' to 'lock' to secure it.
2.3 Printer Compatibility
SUNLU PLA Matte filament is designed to be compatible with most FDM 3D printers. Ensure your printer's filament holder can accommodate a spool diameter of 8.00 inches, a spool width of 2.50 inches, and a spool hub hole diameter of 2.20 inches.
3. പ്രവർത്തന നിർദ്ദേശങ്ങൾ
3.1 ശുപാർശ ചെയ്യുന്ന പ്രിന്റ് ക്രമീകരണങ്ങൾ
For optimal results with SUNLU PLA Matte filament, the following settings are recommended:
- നോസൽ താപനില: 200-230 ഡിഗ്രി സെൽഷ്യസ്
- കിടക്ക താപനില: 50-65 ഡിഗ്രി സെൽഷ്യസ്
- പ്രിൻ്റിംഗ് വേഗത: 50-100mm/s
3.2 Filament Loading and Unloading
Follow your 3D printer's specific instructions for loading and unloading filament. Ensure the filament is fed smoothly into the extruder without kinks or excessive force. When unloading, heat the nozzle to the recommended temperature before carefully pulling the filament out.
3.3 Print Quality and Characteristics
SUNLU PLA Matte filament is known for its smooth matte finish, excellent layer adhesion, and minimal stringing. The precise dimensional accuracy contributes to stable and consistent prints.
Print Quality Exampലെസ്
Video 2: Demonstrates the matte finish and print quality of SUNLU PLA Matte Pink filament.
Video 3: Shows the smooth finish and print quality of SUNLU PLA Matte Blue filament.
Video 4: Highlights the matte finish and print quality of SUNLU PLA Matte Olive Green filament.
4. പരിപാലനം
4.1 ഫിലമെന്റ് സംഭരണം
To maintain filament quality and prevent moisture absorption, always store unused filament in its original vacuum-sealed bag with the included desiccant. Keep in a cool, dry place away from direct sunlight.
4.2 Dealing with Knotted Filament
In rare cases, filament may become knotted. If you encounter a knot, carefully unspool the affected section and smooth out any twists or tangles before re-spooling. Always ensure the filament end is secured in the spool's wire hole when not in use to prevent tangling.
Video 5: Instructions on how to deal with knotted filament and re-spool correctly.
5. പ്രശ്നപരിഹാരം
5.1 സാധാരണ അച്ചടി പ്രശ്നങ്ങൾ
| ഇഷ്യൂ | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| ക്ലോഗ്ഗിംഗ് | Incorrect temperature, dust/debris, moisture absorption. | Adjust nozzle temperature, clean nozzle, dry filament. |
| സ്ട്രിംഗ് | High nozzle temperature, incorrect retraction settings. | Lower nozzle temperature, optimize retraction distance/speed. |
| Poor Adhesion | Dirty print bed, incorrect bed temperature, improper bed leveling. | Clean print bed, adjust bed temperature (50-65°C), re-level bed. |
| വാർപ്പിംഗ് | Insufficient bed temperature, drafts, large prints. | Increase bed temperature, use enclosure, add brim/raft. |
6 സ്പെസിഫിക്കേഷനുകൾ
- ബ്രാൻഡ്: സുൻലു
- മെറ്റീരിയൽ: പോളിലാക്റ്റിക് ആസിഡ് (പിഎൽഎ)
- നിറം: 1000g Pla Black (Current Product)
- ഇനത്തിൻ്റെ ഭാരം: 2.2 പൗണ്ട് (1 കിലോഗ്രാം)
- ഉൽപ്പന്ന അളവുകൾ: 7.87 x 2.56 x 7.87 ഇഞ്ച്
- ഇനം വ്യാസം: 1.75 മില്ലിമീറ്റർ
- Dimensional Accuracy: +/- 0.02 മി.മീ
- Spool Diameter: 8.00 ഇഞ്ച്
- Spool Width: 2.50 ഇഞ്ച്
- Spool Hub Hole Diameter: 2.20 ഇഞ്ച്
- നിർമ്മാതാവിൻ്റെ ഭാഗം നമ്പർ: FR-PLAYG-BK-1KG
- ആദ്യം ലഭ്യമായ തീയതി: സെപ്റ്റംബർ 16, 2022
7. വാറൻ്റിയും പിന്തുണയും
This product is covered by a 30-day return policy for refund or replacement. For further support, please visit the official SUNLU Store on Amazon or contact their customer service.
Official SUNLU Store: SUNLU Store