ARREGUI P180070

ARREGUI സേഫ് സപ്പോർട്ട് P180070 ഇൻസ്ട്രക്ഷൻ മാനുവൽ

1. ആമുഖം

This manual provides comprehensive instructions for the proper installation, usage, and maintenance of the ARREGUI Safe Support, model P180070. This support is designed to elevate compatible ARREGUI Plus C safes, enhancing accessibility and ensuring stable placement. Please read these instructions carefully before installation to ensure correct setup and optimal performance.

2. ഉൽപ്പന്നം കഴിഞ്ഞുview

The ARREGUI Safe Support P180070 is a robust base designed to integrate seamlessly with specific ARREGUI Plus C safe models. Its primary function is to raise the safe to a more convenient height for user access and to provide a stable foundation.

2.1 പ്രധാന സവിശേഷതകൾ

  • Elevated Positioning: Raises the safe to a comfortable height for easier access.
  • മുൻകൂട്ടി തുരന്ന ദ്വാരങ്ങൾ: Includes pre-drilled holes for secure attachment of the safe to the support.
  • സ്ഥിരതയുള്ള അടിത്തറ: Equipped with feet to ensure the stability of the safe.
  • പൊരുത്തപ്പെടുന്ന ഡിസൈൻ: Features a black finish, consistent with ARREGUI Plus C safes.

2.2 അനുയോജ്യത

This support is exclusively compatible with the following ARREGUI Plus C safe models:

  • ARREGUI Plus C 180040
  • ARREGUI Plus C 180050
  • ARREGUI Plus C 180070
  • ARREGUI Plus C 180140
  • ARREGUI Plus C 180150
  • ARREGUI Plus C 180170
  • ARREGUI Plus C 180340
  • ARREGUI Plus C 180350
  • ARREGUI Plus C 180370
ARREGUI Safe Support P180070

Figure 1: The ARREGUI Safe Support P180070. This image displays the black metal base with its structural design and pre-drilled holes for safe attachment.

3. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

Follow these steps to correctly install your ARREGUI Safe Support P180070 and secure your compatible ARREGUI Plus C safe.

  1. ഘടകങ്ങൾ അൺപാക്ക് ചെയ്യുക: Carefully remove the safe support from its packaging. Inspect for any damage.
  2. ലൊക്കേഷൻ തിരഞ്ഞെടുക്കുക: Select a flat, stable, and level surface for the safe and its support. Ensure the chosen location can bear the combined weight of the safe, its contents, and the support.
  3. Position the Support: Place the ARREGUI Safe Support P180070 in the desired location.
  4. സുരക്ഷിതമായി സ്ഥാപിക്കുക: Carefully lift your compatible ARREGUI Plus C safe and align its base with the top surface of the support. Ensure the safe's pre-drilled holes align with the corresponding holes on the support.
  5. സേഫ് സുരക്ഷിതമാക്കുക: Using appropriate fasteners (not included, typically supplied with the safe or purchased separately), secure the safe to the support through the aligned holes. Tighten all fasteners firmly but do not overtighten.
  6. സ്ഥിരത പരിശോധിക്കുക: Gently test the stability of the assembled safe and support. It should not wobble or shift. If instability is detected, re-check the alignment and tightness of fasteners, and ensure the floor surface is level.

പ്രധാനപ്പെട്ടത്: Always ensure the safe is empty before attempting to lift or move it. Seek assistance if the safe is too heavy to handle safely.

4. ഉപയോഗവും പ്രവർത്തനവും

Once installed, the ARREGUI Safe Support P180070 operates passively by providing an elevated and stable platform for your safe. No active operation is required from the support itself.

  • പ്രവേശനക്ഷമത: The elevated position allows for easier access to the safe's contents without excessive bending.
  • സ്ഥിരത: The support's design, combined with proper installation, ensures the safe remains stable during opening, closing, and access.

5. പരിപാലനം

The ARREGUI Safe Support P180070 requires minimal maintenance to ensure its longevity and continued performance.

  • വൃത്തിയാക്കൽ: മൃദുവായ, d തുണി ഉപയോഗിച്ച് സപ്പോർട്ട് തുടയ്ക്കുക.amp cloth to remove dust and dirt. Avoid abrasive cleaners or solvents that could damage the finish.
  • ആനുകാലിക പരിശോധന: Periodically check the fasteners connecting the safe to the support to ensure they remain tight. Re-tighten if necessary.
  • സ്ഥിരത പരിശോധന: Occasionally verify the overall stability of the safe and support assembly.

6. പ്രശ്‌നപരിഹാരം

If you encounter issues with the stability or placement of your safe on the support, refer to the following:

പ്രശ്നംസാധ്യമായ കാരണംപരിഹാരം
Safe wobbles or is unstable.
  • Fasteners are loose.
  • ഉപരിതലം അസമമാണ്.
  • Safe not properly aligned on support.
  • എല്ലാ ഫാസ്റ്റനറുകളും സുരക്ഷിതമായി മുറുക്കുക.
  • Move the assembly to a level surface or use shims to level the support's feet.
  • Re-position the safe to ensure proper alignment with the support's holes.
Difficulty aligning safe with support holes.
  • Incorrect safe model.
  • Safe or support is not level.
  • Verify your safe is one of the compatible ARREGUI Plus C models listed in Section 2.2.
  • Ensure both the safe and the support are on a level surface before attempting to align.

7 സ്പെസിഫിക്കേഷനുകൾ

ആട്രിബ്യൂട്ട്വിശദാംശങ്ങൾ
ബ്രാൻഡ്ARREGUI
മോഡൽ നമ്പർP180070
ഉൽപ്പന്ന അളവുകൾ (L x W x H)37.5 x 35.5 x 10 സെ.മീ
നിറംകറുപ്പ്
Type of FixationFloor mounting (for safe to support)
Compatible Safe ModelsARREGUI Plus C 180040, 180050, 180070, 180140, 180150, 180170, 180340, 180350, 180370

8. വാറൻ്റിയും പിന്തുണയും

Information regarding the specific warranty terms for the ARREGUI Safe Support P180070 is not available in this document. For warranty details, technical support, or further assistance, please contact ARREGUI customer service directly or refer to the official ARREGUI webസൈറ്റ്.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.