LadyCent Car Rear View Mirror Cap Installation Manual

1. ആമുഖം

This manual provides detailed instructions for the installation and care of your LadyCent Car Rear View Mirror Caps. These mirror caps are designed to enhance the appearance and provide protection for the side mirrors of compatible Toyota Innova AN140 Kijang models manufactured between 2015 and 2018. Please read all instructions carefully before proceeding with installation.

2. ഉൽപ്പന്ന സവിശേഷതകൾ

• മോടിയുള്ള മെറ്റീരിയൽ: Constructed from high-quality ABS material, ensuring longevity and resistance to aging and wear in various weather conditions.
• സംരക്ഷണ രൂപകൽപ്പന: Effectively shields the rearview mirror from scratches, stains, and other accidental damage.
• മെച്ചപ്പെടുത്തിയ സൗന്ദര്യശാസ്ത്രം: Features a stylish, smooth-edged design with a fresh and shiny appearance, adding a luxurious touch to your vehicle.
• സംയോജിത ലൈറ്റിംഗ്: Includes built-in lights for improved visibility and safety.
• എളുപ്പമുള്ള ഇൻസ്റ്റാളേഷൻ: Designed for direct add-on installation without the need for cutting, drilling, or causing damage to the vehicle.

3. പാക്കേജ് ഉള്ളടക്കം

നിങ്ങളുടെ പാക്കേജിൽ ഇനിപ്പറയുന്ന ഇനങ്ങൾ അടങ്ങിയിരിക്കണം:

• One (1) pair of LadyCent Car Rear View Mirror Caps (Left and Right) OR One (1) single mirror cover, depending on your order.
• Integrated wiring for LED lights.

Note: Please inspect all components upon receipt. If any items are missing or damaged, contact customer support immediately.

4 അനുയോജ്യത

These mirror caps are specifically designed for:

• വാഹന മോഡൽ: Toyota Innova AN140 Kijang
• മോഡൽ വർഷങ്ങൾ: 2015, 2016, 2017, 2018

Before installation, confirm that this product matches your vehicle's make and model year to ensure proper fitment and function.

5 സുരക്ഷാ വിവരങ്ങൾ

• Ensure the vehicle is turned off and the ignition key is removed before beginning installation.
• If you are unsure about any step of the installation process, it is recommended to seek professional assistance.
• Handle the mirror caps carefully to avoid scratching the finish or damaging the integrated lights.

6. ഇൻസ്റ്റാളേഷൻ ഗൈഡ്

Follow these steps for a direct add-on installation of your LadyCent Car Rear View Mirror Caps. No cutting or drilling is required.

ഘട്ടം 1: ഇൻസ്റ്റലേഷൻ ഏരിയ തയ്യാറാക്കുക

Clean the surface of your existing side mirrors thoroughly. Ensure the area is free from dust, dirt, wax, or grease. Use an alcohol wipe or a mild cleaning solution and allow it to dry completely. A clean surface is crucial for proper adhesion.

ചിത്രം 1: മുൻഭാഗം view of the LadyCent Car Rear View Mirror Caps.

Step 2: Test Fit the Mirror Cap

Before removing any adhesive backing, carefully place each mirror cap over your existing side mirror housing to ensure a correct fit. Identify the left and right caps. This step helps you understand how the cap will align and where the wiring needs to be routed.

ചിത്രം 2: വശം view of the mirror caps, showing their contoured shape.

Step 3: Prepare for Wiring (If Applicable)

The mirror caps include integrated lights. Carefully route the red wires from the back of the mirror cap. These wires will need to be connected to your vehicle's turn signal or daytime running light circuit. Consult your vehicle's wiring diagram or a professional auto electrician if you are unsure about connecting the electrical components.

ചിത്രം 3: പിൻഭാഗം view of a mirror cap, highlighting the adhesive strips and electrical wiring.

Step 4: Apply the Mirror Cap

Once the wiring is prepared and routed, remove the protective backing from the adhesive strips on the back of the mirror cap. Carefully align the cap with your existing side mirror housing. Press firmly along the entire surface of the cap to ensure strong adhesion. Apply pressure for at least 30 seconds to allow the adhesive to bond properly.

Step 5: Secure Wiring and Test Lights

Secure any loose wiring to prevent interference or damage. Once the adhesive has set (typically 24 hours for full strength), test the integrated lights to ensure they function correctly with your vehicle's electrical system.

ചിത്രം 4: മുകളിൽ നിന്ന് താഴേക്ക് view of the mirror caps, showing the integrated LED strip.

7. പരിപാലനവും പരിചരണവും

• വൃത്തിയാക്കൽ: Clean the mirror caps regularly with a soft cloth and mild automotive soap. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
• പരിശോധന: Periodically check the adhesion of the mirror caps, especially after extreme weather conditions, to ensure they remain securely attached.
• വയറിംഗ്: എല്ലാ വയറിംഗ് കണക്ഷനുകളും സുരക്ഷിതമായും നാശത്തിൽ നിന്നും മുക്തമായും തുടരുന്നു എന്ന് ഉറപ്പാക്കുക.

8. പ്രശ്‌നപരിഹാരം

• Mirror Cap Not Adhering Properly: Ensure the surface was thoroughly cleaned and dry before installation. Apply firm, even pressure for an extended period. Cold temperatures can affect adhesive performance; consider installing in a warm environment or using a heat gun on a low setting to warm the adhesive (carefully).
• Lights Not Functioning: Check all electrical connections. Ensure the wires are correctly connected to the vehicle's power source (e.g., turn signal or DRL circuit). Verify that the vehicle's corresponding lights are working.
• അയഞ്ഞ ഫിറ്റ്: Re-check compatibility with your vehicle model and year. If the fit is loose, ensure the adhesive is making full contact.

9 സ്പെസിഫിക്കേഷനുകൾ

10. വാറൻ്റിയും പിന്തുണയും

LadyCent is committed to providing a better shopping experience. If you have any questions or require assistance with your product, our customer service team offers 24-hour online support. Please contact us through the platform where you purchased the product for prompt assistance.