1. ആമുഖം
The CERAKOTE MC-156 PRO High Gloss Ceramic Clear is a high-performance, air-cured ceramic clear coating designed to restore and protect various surfaces. This product offers industry-leading hardness, chemical resistance, wear performance, and UV stability. It is formulated for easy application and can be used as a top coat over metals, paints, composites, plastics, PVD, and more, providing exceptional gloss and durability.
2 സുരക്ഷാ വിവരങ്ങൾ
മുന്നറിയിപ്പ്: Statements regarding this product have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition. This product is intended for automotive and industrial coatings. Always use in a well-ventilated area. Wear appropriate personal protective equipment, including gloves and eye protection, when handling and applying the product. Keep out of reach of children. Refer to the product's Safety Data Sheet (SDS) for detailed safety information.
3. ഉൽപ്പന്നം കഴിഞ്ഞുview
The CERAKOTE MC-156 PRO High Gloss Ceramic Clear is a lower viscosity version of MC-160, allowing for application at lower film thicknesses (0.25 mil) where tolerance is critical. It provides a high-gloss finish with color stability up to 300°F. This air-cured ceramic clear coating is ideal for paint protection, removing scratches, water spots, grease, and oxidation.
Figure 1: CERAKOTE MC-156 PRO High Gloss Ceramic Clear Product Bottle.
ചിത്രം 2: ഓവർview of CERAKOTE MC-Series, highlighting its air-cure properties and versatility across various materials.
4. തയ്യാറാക്കൽ
Proper surface preparation is crucial for optimal adhesion and performance of the ceramic coating. Ensure the application is performed in a clean environment, out of direct sunlight.
- Surface Correction: The vehicle's paint should already be corrected. This typically includes steps like clay barring to remove contaminants and paint correction (polishing) to eliminate swirls and imperfections.
- ഫൈനൽ വൈപ്പ്: Finish the preparation by wiping the paint with isopropyl alcohol. This step removes any residue from the paint correction process, ensuring a clean surface for coating application.
Video 1: Professional Ceramic Paint Coating Application Video. This video demonstrates the preparation and application process for CERAKOTE ceramic paint coatings.
5. അപേക്ഷാ നിർദ്ദേശങ്ങൾ
Follow these steps for applying the CERAKOTE MC-156 PRO High Gloss Ceramic Clear:
- Shake Bottle: Shake the product bottle for approximately 30 seconds to ensure proper mixing.
- അപേക്ഷകനെ തയ്യാറാക്കുക: Use a microfiber application pad. Generously wet the surface of the pad with the ceramic clear coating. The pad should feel slick and glide across the surface.
- വിഭാഗങ്ങളിൽ പ്രയോഗിക്കുക: Work in manageable sections, typically 3-foot areas. Apply the coating using a cross-hatch application method, ensuring even coverage.
- Finish Edges: After covering the main area of the section, carefully finish off the edges.
- പരിശോധിക്കുക: Inspect the section to ensure there are no missed areas and touch up as needed.
- ബഫിംഗ്: Start a timer for 5 minutes. After 5 minutes, begin buffing the surface using new, high-quality microfiber cloths. A two-towel buffing method is recommended: one towel to level and remove excess coating, and a second towel to buff to a deep shine.
- Rewet Applicator: For each new section, rewet your application pad with additional coating to maintain proper saturation.
6. Curing & Post-Application
Adhere to the following curing guidelines for best results:
- Ready to Return: Allow the coating to cure for a minimum of 2 hours at 65°F (18°C) or higher before returning the vehicle to the customer or exposing it to moisture.
- Ready to Wash: Allow the coating to cure for a full 24 hours at 65°F (18°C) or higher before washing the vehicle.
7 സ്പെസിഫിക്കേഷനുകൾ
- ഇനത്തിൻ്റെ ഭാരം: 4 ഔൺസ്
- ഇനം മോഡൽ നമ്പർ: MC-156 PRO High Gloss Ceramic Clear
- ബ്രാൻഡ്: സെറാക്കോട്ട്
- ഇനത്തിൻ്റെ ഫോം: ദ്രാവകം
- ഉൽപ്പന്നത്തിൻ്റെ പ്രത്യേക ഉപയോഗങ്ങൾ: Automotive and industrial coatings
- ഉൽപ്പന്നത്തിനായി ശുപാർശ ചെയ്യുന്ന ഉപയോഗങ്ങൾ: For Paint Protection, Removes Scratches, Removes Water Spots, Removes Grease, Removes Oxidation
- പ്രധാന സവിശേഷതകൾ: Industry-leading hardness, chemical resistance, wear performance, UV stability, color stability to 300°F, easy application.
8. പിന്തുണ
For any questions or comments regarding your CERAKOTE product, please contact our customer service or technical support team:
- കസ്റ്റമർ സർവീസ്: 1-866-774-7628
- ഇമെയിൽ: TECHNICALSUPPORT@CERAKOTE.COM