JIARUIXIN DR01 V2.6 390MYK 12V Electric Ride-On Car Remote Control and Receiver Kit

ആമുഖം

This manual provides detailed instructions for the installation, operation, and maintenance of your JIARUIXIN DR01 V2.6 390MYK 12V 2.4G Bluetooth Remote Control and Receiver Kit. This kit is designed as a replacement part for specific children's electric ride-on cars. Please read this manual thoroughly before installation and use to ensure proper function and safety.

സുരക്ഷാ വിവരങ്ങൾ

• Always disconnect power to the ride-on car before installing or replacing any components.
• Ensure all connections are secure and correctly polarized to prevent damage to the control box or the vehicle.
• This product is intended for use by adults for installation and maintenance. Keep small parts away from children.
• Do not expose the control box or remote control to water or excessive moisture.
• Use only with compatible 12V electric ride-on cars as specified.

പാക്കേജ് ഉള്ളടക്കം

നിങ്ങളുടെ പാക്കേജിൽ എല്ലാ ഇനങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കുക:

• 1 x Control Box (DR01 V2.6 390MYK 12V)
• 1 x Remote Control (2.4G Bluetooth)

അനുയോജ്യത പരിശോധന

Before installation, it is crucial to confirm that this control box is compatible with your electric ride-on car. Open your vehicle and compare the appearance and model number of your existing control box with the one provided in this kit.

ചിത്ര വിവരണം: This image displays two control boxes side-by-side. The left box is labeled "390MYK" and the right box is labeled "390BLE". A large equals sign (=) is positioned between them, indicating that "390MYK" is equivalent to "390BLE" for compatibility purposes. Both boxes are labeled "DR01 V2.6 +12V". This visual comparison helps users identify if their existing control box matches the replacement.

The model numbers DR01 V2.6 390MYK 12V and DR01 V2.6 390BLE 12V are interchangeable. If your original control box has a similar appearance and one of these model numbers, this replacement part should be compatible.

സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

1. പവർ വിച്ഛേദിക്കുക: Before beginning any installation, ensure the electric ride-on car's battery is disconnected to prevent electrical shock or damage.
2. Locate Original Control Box: Open the ride-on car's chassis to access the existing control box. Note the wiring connections.
3. Remove Original Control Box: Carefully disconnect all wires from the old control box and remove it from the vehicle.
4. Install New Control Box: Connect the wires from the ride-on car to the new DR01 V2.6 390MYK 12V control box. Ensure all connections are firm and correctly matched (e.g., motor wires, power input, steering).
5. സുരക്ഷിത നിയന്ത്രണ ബോക്സ്: Mount the new control box securely within the vehicle's chassis.
6. പവർ വീണ്ടും ബന്ധിപ്പിക്കുക: Reconnect the ride-on car's battery.

ചിത്ര വിവരണം: ഈ ചിത്രം വിശദമായ ഒരു വിവരണം നൽകുന്നു view of the DR01 V2.6 390MYK 12V control box. The label "DR01 V2.6 390MYK +12V" is clearly visible. Various connection ports and circuit board components are shown, illustrating the physical layout for installation reference.

Operating Instructions: Remote Control Pairing

After installing the new control box, you must pair the 2.4G Bluetooth remote control with the ride-on car. This process is also necessary if you replace the remote control's batteries.

1. പവർ ഓൺ കാർ: Turn on the electric ride-on car.
2. Activate Remote Pairing: On the remote control, press and hold the pairing button (often indicated by a small antenna icon or a specific symbol, refer to your remote's specific markings if different).
3. Observe Indicator: While holding the pairing button, the indicator light on the remote control should start flashing.
4. റിലീസ് ബട്ടൺ: Once the indicator light on the remote control stops flashing and remains solid, or if the car responds, the pairing is successful. Release the pairing button.
5. ടെസ്റ്റ് പ്രവർത്തനം: Test all functions of the remote control (forward, backward, left, right, speed settings) to ensure proper operation.

ചിത്ര വിവരണം: This image shows the red 2.4G Bluetooth remote control. It features directional buttons (up, down, left, right), speed/mode buttons, and a central pairing indicator light, which is typically a small triangular LED. This helps users identify the remote and its controls.

കുറിപ്പ്: The exact location and symbol for the pairing button may vary slightly between remote control models. If you encounter difficulties, consult the original ride-on car's manual for specific pairing instructions, or try pressing and holding the "M" or "Code" button if present on your remote.

മെയിൻ്റനൻസ്

• വൃത്തിയാക്കൽ: Use a dry, soft cloth to clean the control box and remote control. Do not use harsh chemicals or abrasive cleaners.
• സംഭരണം: Store the components in a dry place, away from direct sunlight and extreme temperatures.
• ബാറ്ററി മാറ്റിസ്ഥാപിക്കൽ (റിമോട്ട്): When the remote control's range decreases or it becomes unresponsive, replace its batteries. Always re-sync the remote control with the car after changing batteries.
• കണക്ഷൻ പരിശോധനകൾ: Periodically check all wiring connections to the control box to ensure they remain secure.

ട്രബിൾഷൂട്ടിംഗ്

സ്പെസിഫിക്കേഷനുകൾ

• മോഡൽ നമ്പർ: DR01 V2.6 390MYK 12V (also compatible with DR01 V2.6 390BLE 12V)
• വാല്യംtage: 12V
• നിയന്ത്രണ രീതി: 2.4G ബ്ലൂടൂത്ത്
• മെറ്റീരിയൽ: പ്ലാസ്റ്റിക്
• ഇനത്തിൻ്റെ അളവുകൾ: ഏകദേശം 4.8 x 3.8 x 1.8 ഇഞ്ച്
• അസംബ്ലി ആവശ്യമാണ്: Yes (installation into ride-on car)

വാറൻ്റിയും പിന്തുണയും

For any questions, technical support, or warranty inquiries regarding your JIARUIXIN DR01 V2.6 390MYK 12V Remote Control and Receiver Kit, please contact the seller or manufacturer directly through your purchase platform. Please have your order number and product model information ready when contacting support.

Manufacturer: JIARUIXIN