Spigen OneTap 3 (MagFit) Car Mount Instruction Manual

1. ഉൽപ്പന്നം കഴിഞ്ഞുview

The Spigen OneTap 3 (MagFit) is a magnetic car mount designed for secure phone placement in Tesla vehicles. It features OneTap Technology for easy attachment and a robust magnetic hold.

അനുയോജ്യത

This car mount is compatible with:

• Tesla Model 3, Model Y, Model S (2021+), and Model X (2021+).
• iPhone 16, 15, 14, 13, and 12 series.
• MagSafe compatible cases are required for optimal magnetic attachment.

ചിത്രം 1: അനുയോജ്യത അവസാനിച്ചുview for Tesla models and iPhone series.

The mount's sleek design integrates seamlessly with your Tesla's interior, providing a discreet and functional phone holder.

ചിത്രം 2: Spigen OneTap 3 mount installed in a Tesla, showcasing its subtle design and integrated cable organizer.

2. ഇൻസ്റ്റാളേഷൻ ഗൈഡ്

Follow these steps for a secure and lasting installation of your Spigen OneTap 3 car mount.

തയ്യാറാക്കൽ:

1. Identify the desired mounting location behind the corner of your Tesla's display screen.
2. Clean the surface thoroughly with isopropyl alcohol and ensure it is completely dry before proceeding. This removes any dust or oils that could compromise adhesion.
3. Ensure the car interior is not excessively hot during installation to allow for proper adhesive curing.

മൗണ്ടിംഗ് ഘട്ടങ്ങൾ:

1. Remove the protective film from the pre-applied adhesive on the back of the mount.
2. Carefully position the mount behind the corner of your Tesla's screen.
3. Press firmly on the mount for at least 30 seconds to ensure strong initial adhesion.
4. പ്രധാനപ്പെട്ടത്: Allow a curing time of at least 8 hours for optimal adhesion. For full strength, wait 24 hours before attaching your phone or adjusting the mount.

ചിത്രം 3: Visual guide for secure installation, showing adhesive placement and recommended curing times.

ചിത്രം 4: Step-by-step installation process for the Spigen OneTap 3 car mount.

An extra adhesive pad is included for future re-installation if needed.

3. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

നിങ്ങളുടെ ഫോൺ അറ്റാച്ചുചെയ്യുന്നു:

The Spigen OneTap 3 utilizes MagFit technology for a strong magnetic connection with your iPhone (12 series or newer) or MagSafe compatible case.

1. Ensure your iPhone or case is MagSafe compatible.
2. Simply bring your iPhone close to the magnetic head of the mount. It will snap securely into place.

ചിത്രം 5: Magnetic attachment of an iPhone to the OneTap 3 mount.

ക്രമീകരിക്കുന്നു Viewഇൻ ആംഗിൾ:

The mount features an adjustable swing arm and swivel head for optimized viewകോണുകൾ.

• സ്വിംഗ് ആം: Press the button on the side of the arm to adjust its position. It locks into 0-degree, 45-degree, and 90-degree angles, allowing for both horizontal and vertical phone orientation.
• Swivel Head: The magnetic head can be rotated 360 degrees to fine-tune your phone's orientation.

ചിത്രം 6: ക്രമീകരിക്കാവുന്ന viewing angles, showing horizontal and vertical phone positions.

ചിത്രം 7: Detail of the adjustable arm mechanism and cable organizer.

കേബിൾ മാനേജുമെന്റ്:

The mount includes two cable head organizing tapes to keep your charging cables tidy and accessible.

4. വീഡിയോ ഇൻസ്റ്റലേഷൻ ഗൈഡ്

For a visual demonstration of the product and installation, please watch the official video below.

5. പരിചരണവും പരിപാലനവും

To ensure the longevity and optimal performance of your Spigen OneTap 3 car mount:

• Clean the mount periodically with a soft, damp തുണി. കഠിനമായ രാസവസ്തുക്കളോ ഉരച്ചിലുകളുള്ള ക്ലീനറുകളോ ഒഴിവാക്കുക.
• Ensure the adhesive area remains clean and free from debris. If re-installation is necessary, use the provided extra adhesive pad.
• Avoid exposing the mount to extreme temperatures for prolonged periods, as this may affect the adhesive.

6. പ്രശ്‌നപരിഹാരം

If you encounter issues with your Spigen OneTap 3 car mount, consider the following:

• Mount not adhering properly: Ensure the installation surface was clean and dry, and that sufficient curing time (at least 8 hours, ideally 24 hours) was allowed after initial application. Re-apply with the extra adhesive pad if necessary.
• Phone not holding magnetically: Verify that your iPhone is a 12 series or newer, or that your phone case is MagSafe compatible. Ensure no foreign objects are between the phone/case and the mount's magnetic surface.
• Arm not adjusting smoothly: Check for any obstructions in the hinge mechanism. If the issue persists, contact customer support.

7. ഉൽപ്പന്ന സവിശേഷതകൾ

8. വാറൻ്റിയും പിന്തുണയും

വാറൻ്റി വിവരങ്ങൾ:

ഈ ഉൽപ്പന്നം എ 24 മാസത്തെ ആശങ്ക രഹിത വാറന്റിവാറന്റി ക്ലെയിമുകൾക്കായി നിങ്ങളുടെ വാങ്ങിയതിന്റെ തെളിവ് സൂക്ഷിക്കുക.

ഉപഭോക്തൃ പിന്തുണ:

For any questions, technical assistance, or warranty claims, please visit the official Spigen website or contact their customer support directly. Refer to the product packaging for specific contact details.