Flysky FS-SR12 12CH 2.4Ghz ANT Protocol Receiver User Manual

1. ആമുഖം

The Flysky FS-SR12 is a high-performance 12-channel receiver designed for various remote-controlled models. It operates on the 2.4GHz ISM band using the advanced ANT protocol, ensuring reliable and stable communication. This receiver supports 12 PWM channel outputs, two-way transmission, transfer-back functionality, and Battery Voltage Detection (BVD).

ബോക്സിൽ എന്താണുള്ളത്

• Flysky FS-SR12 Receiver

The Flysky FS-SR12 receiver, a compact unit with two antennas and multiple ports for connection.

2 സ്പെസിഫിക്കേഷനുകൾ

റിസീവർ കഴിഞ്ഞുview ഡയഗ്രം

Detailed diagram of the FS-SR12 receiver's pinout and interfaces, including channel assignments and power connections.

ഡയഗ്രം കീ:

• [1] CH1/PPM
• [10] CH10
• [2] CH2
• [11] CH11
• [3] CH3
• [12] CH12
• [4] CH4
• [13] BIND/VCC interface
• [5] CH5
• [14] BVD/VCC interface
• [6] CH6
• [15] SENS ഇന്റർഫേസ്
• [7] CH7
• [16] SERVO/S.BUS ഇന്റർഫേസ്
• [8] CH8
• [17] - (Power cathode)
• [9] CH9
• [18] + (പവർ ആനോഡ്)
• [19] സിഗ്നൽ പിൻ
• [20] എൽഇഡി
• [21] ആൻ്റിനകൾ
• [22] ബൈൻഡ് ബട്ടൺ
• [23] BVD ഹാർനെസ്
• [24] To connect battery anode
• [25] To connect battery cathode

ബിവിഡി വാല്യംtagഇ കണ്ടെത്തൽ ശ്രേണി: 0~70V

3. സജ്ജീകരണ ഗൈഡ്

റിസീവർ ബൈൻഡിംഗ്

The FS-SR12 receiver needs to be bound to a compatible transmitter (e.g., FS-ST8) that supports the ANT protocol. Follow these steps:

1. ട്രാൻസ്മിറ്ററും റിസീവറും ഓഫ് ചെയ്തിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക.
2. Connect the BIND cable (or a bind plug) to the BIND/VCC interface on the receiver.
3. Power on the receiver. The LED indicator should flash rapidly, indicating it is in binding mode.
4. Put your transmitter into binding mode (refer to your transmitter's manual for specific instructions).
5. Once the binding is successful, the LED on the receiver will turn solid.
6. Power off both the receiver and transmitter, then power them back on to confirm the connection.

The Flysky FS-SR12 receiver with a bind plug inserted into the BVD/VCC port, illustrating the binding process.

പെരിഫറലുകൾ ബന്ധിപ്പിക്കുന്നു

The FS-SR12 supports 12 PWM channels, as well as PPM, i-BUS, and S.BUS data outputs. Connect your servos, ESCs, and other peripherals to the corresponding channels.

• PWM ചാനലുകൾ (1-12): Connect servos or Electronic Speed Controllers (ESCs) to these ports.
• PPM/i-BUS/S.BUS: Use the designated port for digital signal output to compatible flight controllers or other devices.
• BVD (Battery Voltage Detection): Connect the BVD harness to the BVD/VCC interface to monitor battery voltage.

The Flysky FS-SR12 receiver with its two antennas and various connection ports clearly visible, demonstrating its compact design.

4. ഓപ്പറേഷൻ

അടിസ്ഥാന പ്രവർത്തനം

Once the receiver is successfully bound to your transmitter and all peripherals are connected, power on your model. The receiver will establish a connection with the transmitter, allowing you to control your model.

Two-Way Transmission and Telemetry

The FS-SR12 supports two-way transmission, enabling the receiver to send data back to the transmitter. This includes telemetry data such as battery voltage (via BVD function) and signal strength, providing real-time feedback during operation.

BVD Function

ബാറ്ററി വോളിയംtage Detection (BVD) function allows you to monitor the voltage of your model's battery directly from your compatible Flysky transmitter. Ensure the BVD harness is correctly connected to the BVD/VCC interface on the receiver and the battery.

5. പരിപാലനം

To ensure the longevity and optimal performance of your FS-SR12 receiver, follow these maintenance guidelines:

• റിസീവർ വൃത്തിയായും പൊടി, അഴുക്ക്, ഈർപ്പം എന്നിവയിൽ നിന്ന് മുക്തമായും സൂക്ഷിക്കുക.
• Avoid exposing the receiver to extreme temperatures outside its specified range (-10°C to +60°C).
• Ensure the humidity range (20% ~ 95%) is respected to prevent condensation or moisture damage.
• Regularly inspect the antennas for any damage or kinks. Ensure they are positioned correctly for optimal signal reception.
• Check all wire connections for secure fitment and signs of wear.
• ഉപയോഗത്തിലില്ലാത്തപ്പോൾ, റിസീവർ വരണ്ടതും തണുത്തതുമായ സ്ഥലത്ത് സൂക്ഷിക്കുക.

6. പ്രശ്‌നപരിഹാരം

No Signal / Loss of Control

• ബൈൻഡിംഗ് പരിശോധിക്കുക: Ensure the receiver is correctly bound to your transmitter. Re-bind if necessary.
• വൈദ്യുതി വിതരണം: Verify that the receiver is receiving adequate power (3.5~9V/DC) and that the power source is stable.
• ആൻ്റിന പ്ലേസ്മെൻ്റ്: Ensure antennas are not obstructed by carbon fiber or metal parts and are positioned at a 90-degree angle to each other for best reception.
• ദൂരം: Operate within the specified distance (> 1500m air distance without interference).
• ഇടപെടൽ: Avoid operating near strong sources of 2.4GHz interference (e.g., Wi-Fi routers, other RC systems).

LED ഇൻഡിക്കേറ്റർ പെരുമാറ്റം

• ദ്രുത മിന്നൽ: Receiver is in binding mode.
• സോളിഡ് ഓൺ: Receiver is successfully bound and receiving signal.
• മന്ദഗതിയിലുള്ള മിന്നൽ: Signal loss or no connection with transmitter.

Incorrect Channel Output

• ട്രാൻസ്മിറ്റർ സജ്ജീകരണം: Verify channel assignments and mixing settings on your transmitter.
• റിസീവർ മോഡ്: Ensure the receiver is outputting the correct signal type (PWM/PPM/i-BUS/S.BUS) for your connected device.

7. വാറൻ്റിയും പിന്തുണയും

For warranty information, technical support, or further inquiries regarding your Flysky FS-SR12 receiver, please visit the official Flysky webസൈറ്റ് അല്ലെങ്കിൽ നിങ്ങളുടെ പ്രാദേശിക ഡീലറെ ബന്ധപ്പെടുക.

ഉദ്യോഗസ്ഥൻ Webസൈറ്റ്: http://www.flysky-cn.com