ഉപയോക്തൃ മാനുവൽ

ആമുഖം

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Earthquake XT 1/2 in. Composite Air Impact Wrench. Please read this manual thoroughly before use and retain it for future reference.

The Earthquake XT 1/2 in. Composite Air Impact Wrench is designed for demanding tasks, offering powerful performance with reduced vibration. Key features include:

• 1200 ft. lbs. of bolt breakaway torque for lightning fast removal.
• Powerful twin-hammer impact mechanism for extreme torque with less vibration.
• One handed push-button FWD/REV with 3-speed rear dial regulator.
• Ultra-rugged rubber overmold and lightweight composite housing.
• Ultra-silent through-handle exhaust keeps debris away from operator.
• Includes protective rubber jacket to keep tool clean and protected.

സുരക്ഷാ വിവരങ്ങൾ

Always wear appropriate personal protective equipment (PPE) including safety glasses, hearing protection, and gloves when operating this tool. Ensure your work area is well-lit and clear of obstructions. Disconnect the air supply before performing any adjustments or maintenance.

സജ്ജമാക്കുക

1. എയർ സപ്ലൈ കണക്ഷൻ: Connect the air impact wrench to a clean, dry, regulated air supply capable of delivering the required air pressure and volume. Use an air hose with a minimum inner diameter of 3/8 inch.
2. ലൂബ്രിക്കേഷൻ: Before initial use, and regularly thereafter, add a few drops of pneumatic tool oil into the air inlet.
3. സോക്കറ്റ് ഇൻസ്റ്റാളേഷൻ: Select the appropriate impact-grade socket for your application. Push the socket firmly onto the square drive anvil until it locks into place.

ചിത്രം: മുൻഭാഗം view of the Earthquake XT 1/2 inch Composite Air Impact Wrench, showcasing its yellow and black composite housing and square drive anvil.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

1. Connecting to Fastener: Place the socket squarely onto the fastener.
2. Direction Control (FWD/REV): Use the push-button FWD/REV selector located near the trigger to choose the desired rotation direction. "FWD" is for tightening, "REV" is for loosening.
3. Speed/Torque Regulation: The 3-speed rear dial regulator allows adjustment of the output torque. Select the appropriate setting for your task. Start with a lower setting and increase if more torque is needed.
4. പ്രവർത്തനം: Squeeze the trigger to activate the tool. Apply steady pressure to the tool to prevent kickback. Release the trigger to stop operation.

ചിത്രം: വശം view of the Earthquake XT 1/2 inch Composite Air Impact Wrench, highlighting the ergonomic grip and control buttons.

മെയിൻ്റനൻസ്

• ദിവസേനയുള്ള ലൂബ്രിക്കേഷൻ: Add 5-10 drops of pneumatic tool oil into the air inlet before each use or every few hours of continuous operation.
• എയർ ഫിൽട്ടർ: Regularly check and clean the air filter in your air compressor system to ensure clean air supply to the tool.
• Hose and Fittings: Inspect air hoses and fittings for wear, leaks, or damage. Replace as necessary.
• വൃത്തിയാക്കൽ: Keep the tool clean and free of debris. Wipe down the composite housing with a damp തുണി. കഠിനമായ ലായകങ്ങൾ ഉപയോഗിക്കരുത്.
• സംഭരണം: Store the tool in a clean, dry environment when not in use.

ട്രബിൾഷൂട്ടിംഗ്

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റി

The manufacturer guarantees this product to be free from defects in materials and workmanship for 90 days from the date of purchase. Limitations apply. Please retain your proof of purchase for warranty claims.

പിന്തുണ

For technical assistance, parts, or service, please contact the manufacturer's customer support. Refer to the product packaging or manufacturer's webബന്ധപ്പെടാനുള്ള വിവരങ്ങൾക്കുള്ള സൈറ്റ്.