ShockFlo Type 2 EV Charging Cable (Schuko, 32A, 7kW, 6m) User Manual

1. ആമുഖം

Thank you for choosing the ShockFlo Type 2 EV Charging Cable. This manual provides essential information for the safe and efficient operation, installation, and maintenance of your EV charger. Please read this manual thoroughly before using the product and retain it for future reference.

This portable EV charging cable is designed to provide a convenient and reliable charging solution for your electric vehicle, offering adjustable current settings and a delayed start function to optimize your charging experience.

2. സുരക്ഷാ നിർദ്ദേശങ്ങൾ

Always adhere to the following safety guidelines to prevent injury, damage, or malfunction:

• Ensure the charging cable and connectors are free from damage before each use. Do not use if any part is damaged.
• Connect the charger only to a properly grounded CEE 1-phase socket that meets local electrical codes.
• Do not immerse the control box or connectors in water. While the unit is IP67 waterproof, it is not designed for submersion.
• Keep children and pets away from the charging area during operation.
• Avoid touching the charging pins directly.
• Do not attempt to open, disassemble, or modify the charger. This will void the warranty and may cause safety hazards.
• The charger is equipped with 10 safety protections, including lightning protection, current leakage protection, ground fault protection, undervoltagഇ സംരക്ഷണം, overvoltage protection, overload protection, overheating protection, and overcurrent protection.
• In case of any abnormal operation or error, immediately disconnect the charger from the power source and the vehicle.

3. ഉൽപ്പന്നം കഴിഞ്ഞുview

3.1 ഘടകങ്ങൾ

• ShockFlo Type 2 EV Charging Cable with CEE 1-phase plug (32A, 7kW, 6m)
• Control Box with LCD Display
• Type 2 Vehicle Connector
• Detachable Controller Holder (for wall mounting)
• സ്റ്റോറേജ് ബാഗ്

3.2 പ്രധാന സവിശേഷതകൾ

• ഫാസ്റ്റ് ചാർജിംഗ്: Delivers up to 7kW power, providing approximately 40 km of range per hour at 230V, 32A.
• ക്രമീകരിക്കാവുന്ന കറന്റ്: Selectable current settings (10A, 16A, 20A, 24A, 32A) to match your electrical circuit capacity.
• വൈകിയ ആരംഭ പ്രവർത്തനം: Schedule charging to begin at a later time, allowing you to take advantagഓഫ്-പീക്ക് വൈദ്യുതി നിരക്കുകളുടെ ഇ.
• 2-ഇൻ-1 ഡിസൈൻ: Functions as both a portable charger and a wall-mounted charging station with the included detachable holder.
• 6-Meter Cable: നൽകുന്നു ampസൗകര്യപ്രദമായ ചാർജിംഗിനായി എത്തുക.
• വിശാലമായ അനുയോജ്യത: Compatible with all Type 2/CCS charging ports, suitable for most electric vehicles including Volkswagen, Tesla, Renault, Hyundai, SMART, Opel, Skoda, and BMW.
• HD LCD ഡിസ്പ്ലേ: Clearly shows real-time charging data such as current, charging rate, and voltage.
• കരുത്തുറ്റ നിർമ്മാണം: Made from high-quality, shock-resistant, and drop-proof materials.

4. സജ്ജീകരണം

4.1 Wall-Mounted Installation (Optional)

If you prefer a fixed charging station, use the detachable controller holder to mount the control box to a suitable wall. Ensure the mounting location is secure, protected from direct sunlight and heavy rain, and within reach of your vehicle and a CEE 1-phase power outlet.

1. Select a sturdy wall surface capable of supporting the charger's weight.
2. Mark the drilling points using the detachable holder as a template.
3. ദ്വാരങ്ങൾ തുരന്ന് ഉചിതമായ വാൾ ആങ്കറുകൾ സ്ഥാപിക്കുക.
4. Secure the detachable holder to the wall using screws.
5. Slide the control box onto the mounted holder.

4.2 പോർട്ടബിൾ ഉപയോഗം

For portable use, simply place the control box on a stable, dry surface near your vehicle and the power outlet. Ensure the cable is not stretched or kinked.

5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

5.1 അടിസ്ഥാന ചാർജിംഗ് നടപടിക്രമം

1. നിങ്ങളുടെ വാഹനം പാർക്ക് ചെയ്‌തിട്ടുണ്ടെന്നും ഓഫാക്കിയിട്ടുണ്ടെന്നും ഉറപ്പാക്കുക.
2. Plug the CEE 1-phase power plug into a suitable wall socket. The control box LCD will illuminate.
3. നിങ്ങളുടെ വാഹനത്തിന്റെ ചാർജിംഗ് പോർട്ട് കവർ തുറക്കുക.
4. Insert the Type 2 vehicle connector firmly into your vehicle's charging port. Ensure it clicks into place.
5. The charger will initiate a self-check, and then charging will begin automatically with the last set current. The green indicator light will flash.
6. To stop charging, first disconnect the Type 2 connector from the vehicle, then unplug the CEE power plug from the wall socket.

5.2 കറന്റ് ക്രമീകരിക്കൽ

Before connecting the Type 2 connector to your vehicle, you can adjust the charging current:

1. With the CEE plug connected to the wall socket but the Type 2 connector not yet connected to the vehicle, press the 'CURRENT' button on the control box.
2. Cycle through the available current options: 10A, 16A, 20A, 24A, 32A.
3. Select the desired current based on your vehicle's requirements and your electrical circuit's capacity.
4. Once the current is set, connect the Type 2 connector to your vehicle to begin charging.

5.3 Setting Delayed Start

To schedule charging for a later time:

1. With the CEE plug connected to the wall socket but the Type 2 connector not yet connected to the vehicle, press the 'DELAY' button on the control box.
2. Each press will increase the delay time in hourly increments (e.g., 1 hour, 2 hours, up to 12 hours).
3. Once the desired delay is set, connect the Type 2 connector to your vehicle. The charger will display the countdown and begin charging after the set delay.

5.4 ഇൻഡിക്കേറ്റർ ലൈറ്റുകൾ

• ഗ്രീൻ ലൈറ്റ് ഓൺ: ഫുൾ ചാർജായി.
• ഗ്രീൻ ലൈറ്റ് മിന്നുന്നു: ചാർജിംഗ് പുരോഗമിക്കുന്നു.
• റെഡ് ലൈറ്റ് ഓൺ: സ്റ്റാൻഡ്‌ബൈ മോഡ്.
• ചുവന്ന ലൈറ്റ് മിന്നുന്നു: Error detected. Refer to the Troubleshooting section.

6. പരിപാലനം

• വൃത്തിയാക്കൽ: Disconnect the charger from all power sources and the vehicle before cleaning. Use a soft, dry cloth to wipe the control box and cables. Do not use harsh chemicals or abrasive cleaners.
• സംഭരണം: When not in use, store the charging cable neatly in the provided storage bag. Avoid kinking or bending the cable sharply. Store in a dry, cool place away from direct sunlight and extreme temperatures.
• പരിശോധന: Regularly inspect the cable, connectors, and control box for any signs of wear, damage, or corrosion. If any damage is found, discontinue use and contact customer support.

7. പ്രശ്‌നപരിഹാരം

If you encounter issues, refer to the following table. If the problem persists, contact customer support.

8 സ്പെസിഫിക്കേഷനുകൾ

9. വാറൻ്റിയും പിന്തുണയും

ShockFlo products are manufactured to high-quality standards. For warranty information, technical support, or any questions regarding your EV charging cable, please contact ShockFlo customer service through the retailer where you purchased the product or visit the official ShockFlo webബന്ധപ്പെടാനുള്ള വിശദാംശങ്ങൾക്കുള്ള സൈറ്റ്.

Please have your product model number (Type 2 EV Charger) and purchase date available when contacting support.