Shutao STC-3028
STC-3028 24V Temperature & Humidity Controller User Manual
Model: STC-3028 (13443ST-1)
Brand: Shutao
ഉൽപ്പന്നം കഴിഞ്ഞുview
The STC-3028 is a versatile 24V temperature and humidity controller designed for precise environmental management. It features a dual digital display for simultaneous monitoring of temperature and humidity, making it ideal for applications such as incubators, terrariums, and other controlled environments. This device supports both heating/cooling and humidifying/dehumidifying functions.
Image: The STC-3028 controller unit with its integrated temperature and humidity sensor. The controller features a dual digital display showing temperature in red and humidity in blue.
സാങ്കേതിക സവിശേഷതകൾ
| സ്പെസിഫിക്കേഷൻ | മൂല്യം |
|---|---|
| ഇൻപുട്ട് വോളിയംtage | എസി 24 വി |
| താപനില പരിധി അളക്കുന്നു | -50°C മുതൽ +110°C വരെ |
| ഈർപ്പം പരിധി അളക്കുന്നു | 00%RH to +100%RH |
| താപനില കൃത്യത | ±1°C |
| ഈർപ്പം കൃത്യത | ± 0.1% RH |
| റിലേ ഔട്ട്പുട്ട് കോൺടാക്റ്റ് ശേഷി | 10A/240VAC |
| ഡിസ്പ്ലേ തരം | ഡിജിറ്റൽ |
| മെറ്റീരിയൽ | പ്ലാസ്റ്റിക് |
| അളവുകൾ (L x W x H) | 75mm x 85mm x 27mm (ഏകദേശം 2.95in x 3.34in x 1.06in) |
| ഇനത്തിൻ്റെ ഭാരം | 0.48 ഔൺസ് (ഏകദേശം 0.03 പൗണ്ട്) |
Image: Diagram showing the dimensions of the STC-3028 controller: 75mm (2.95 inches) length, 85mm (3.34 inches) width, and 27mm (1.06 inches) height.
പാക്കേജ് ഉള്ളടക്കം
പാക്കേജിൽ ഇനിപ്പറയുന്ന ഇനങ്ങൾ ഉൾപ്പെടുന്നു:
- 1 x STC-3028 Temperature and Humidity Controller
- 1 x Integrated Sensor (for temperature and humidity measurement)
സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
വയറിംഗ് ഡയഗ്രം
Proper wiring is crucial for the safe and correct operation of the STC-3028 controller. Refer to the diagram below for connection details.
Image: A visual representation of the STC-3028 wiring diagram. It shows terminals for power supply (1-2), humidity sensor (3-5), and output relays for temperature (6-7) and humidity (8-9). The diagram also indicates voltage options (110-220VAC, 12V, 24V) and important notes regarding distinguishing interfaces and maintaining proper wire distance.
പ്രധാന കുറിപ്പുകൾ:
- Strictly distinguish the interface of the relay, sensor, and power supply.
- Strictly distinguish the connection of the sensor and power supply.
- The sensor down-lead and power wire should be kept a proper distance apart to avoid interference.
- ശരിയായ വോളിയം ഉറപ്പാക്കുകtage (24V) is supplied as indicated on the unit.
മൗണ്ടിംഗ്
The STC-3028 is designed for panel mounting. Ensure adequate space for ventilation, especially around the heat dissipation grids on the sides of the unit.
Image: The STC-3028 controller with a visual representation of air flowing through its side vents, indicating effective heat dissipation. The image highlights the cooling grid design for efficient cooling.
പ്രവർത്തന നിർദ്ദേശങ്ങൾ
Setting Startup Temperature/Humidity
- അമർത്തുക "up" button once to display the current starting temperature or humidity setting.
- ദീർഘനേരം അമർത്തുക "up" button for approximately 3 seconds until the display flashes.
- ഉപയോഗിക്കുക "up" ഒപ്പം "down" keys to adjust the desired starting temperature or humidity value.
- The setting will automatically save after a few seconds of inactivity or by pressing another button.
Setting Stop Temperature/Humidity
- അമർത്തുക "down" button once to display the current stop temperature or humidity setting.
- ദീർഘനേരം അമർത്തുക "down" button for approximately 3 seconds until the display flashes.
- ഉപയോഗിക്കുക "up" ഒപ്പം "down" keys to adjust the desired stop temperature or humidity value.
- The setting will automatically save after a few seconds of inactivity or by pressing another button.
Temperature/Humidity Correction (Calibration)
To correct or calibrate the temperature and humidity readings:
- അമർത്തുക "up" ഒപ്പം "down" ഒരേസമയം ബട്ടണുകൾ.
- Follow the on-screen prompts to adjust the offset for temperature or humidity. Refer to the product's advanced settings for detailed calibration procedures if available.
മെയിൻ്റനൻസ്
- വൃത്തിയാക്കൽ: Regularly wipe the unit with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- സെൻസർ പരിചരണം: Keep the integrated sensor clean and free from dust or debris to ensure accurate readings. Avoid exposing the sensor to extreme physical shock or moisture beyond its operating range.
- വെൻ്റിലേഷൻ: Ensure the ventilation grids on the sides of the unit are not obstructed to allow for proper heat dissipation.
- വൈദ്യുതി വിച്ഛേദിക്കൽ: Always disconnect power before performing any maintenance or wiring adjustments.
ട്രബിൾഷൂട്ടിംഗ്
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| Display shows "LLL" or "HHH" | Sensor error, sensor disconnected, or reading out of range. | Check sensor connection. Ensure sensor is within operating temperature/humidity range. Replace sensor if damaged. |
| യൂണിറ്റ് പവർ ഓണാക്കുന്നില്ല | വൈദ്യുതി ഇല്ല, തെറ്റായ വോളിയംtage, or faulty wiring. | Verify power connection and ensure 24V AC supply. Check wiring according to the diagram. |
| Output relay not activating | Settings incorrect, or relay faulty. | Review startup and stop settings. Ensure the measured value is outside the set range to trigger the relay. Check relay wiring. |
| കൃത്യമല്ലാത്ത വായനകൾ | Sensor dirty, sensor interference, or needs calibration. | Clean the sensor. Ensure sensor wires are kept separate from power wires. Perform temperature/humidity correction. |
വാറൻ്റിയും പിന്തുണയും
For warranty information and technical support, please contact Shutao customer service. Keep your purchase receipt as proof of purchase.
Contact information may be available on the product packaging or the manufacturer's official webസൈറ്റ്.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.