Yamazaki Tower Wall-Mounted Hair Dryer Holder, White, Model 4508

1. ഉൽപ്പന്നം കഴിഞ്ഞുview

The Yamazaki Tower Wall-Mounted Hair Dryer Holder is designed to provide a convenient and space-saving storage solution for your hair dryer in the washroom. It can be easily installed on various wall types, including plasterboard, using the provided hardware.

The Yamazaki Tower Wall-Mounted Hair Dryer Holder, shown in white, is designed for easy installation on washroom walls using plasterboard pins.

2. സവിശേഷതകൾ

• എളുപ്പമുള്ള ഇൻസ്റ്റാളേഷൻ: Can be installed using either plasterboard pins (for minimal wall damage, suitable for rental properties) or wood screws for a more secure mount.
• സ്പേസ് സേവിംഗ് ഡിസൈൻ: Mounts your hair dryer on the wall, freeing up counter space.
• Versatile Orientation: The holder allows the hair dryer to be stored facing either left or right, adapting to your preference and installation location.
• Accommodates Various Sizes: Designed to hold a range of hair dryer sizes, including smaller models.
• Integrated Cord Management: Features a hook at the bottom to neatly wrap and store the power cord.
• Protective Cushions: Includes cushions to prevent scratches and rattling when placing or removing the hair dryer.

3. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

3.1 ഉൾപ്പെടുത്തിയ ഘടകങ്ങൾ

ഇൻസ്റ്റാൾ ചെയ്യുന്നതിനുമുമ്പ്, എല്ലാ ഘടകങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കുക:

• Hair Dryer Holder x 1
• Plasterboard Pin Set x 2
• വുഡ് സ്ക്രൂ x 2
• Cushion (Large) x 4
• Cushion (Small) x 4

The product comes with two types of installation hardware: plasterboard pins for minimal wall damage and wood screws for more secure mounting on wooden surfaces.

3.2 ഒരു മൗണ്ടിംഗ് ലൊക്കേഷൻ തിരഞ്ഞെടുക്കുന്നു

Select a flat, stable wall surface in your washroom or desired area. Ensure there is enough space for your hair dryer and its cord.

3.3 Installation Steps (Plasterboard Pins)

1. Position the holder against the wall at the desired height.
2. Mark the locations for the two pin holes.
3. Insert the plasterboard pins into the marked spots. Use a coin to gently push the pins fully into the wall until secure.
4. Align the holder with the inserted pins and attach it.

Installation is made simple with plasterboard pins, which create minimal holes in the wall, making this holder ideal for rental properties or temporary setups.

3.4 Installation Steps (Wood Screws)

1. Position the holder against a wooden stud or solid wood surface at the desired height.
2. Mark the locations for the two screw holes.
3. Using a screwdriver, securely fasten the holder to the wall with the provided wood screws.

3.5 Applying Cushions

Attach the included cushions to the inner surfaces of the holder where your hair dryer will rest. This prevents direct contact between the dryer and the holder, minimizing scratches and reducing noise from vibrations.

Included cushions can be attached to the holder to prevent scratches and rattling when placing or removing the hair dryer.

4. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

4.1 Storing Your Hair Dryer

Gently place your hair dryer into the holder. The design allows for storage with the dryer facing either left or right, depending on your preference and the layout of your space.

The flexible design allows the hair dryer to be stored facing either left or right, adapting to your preference and installation location.

4.2 Cord Management

After placing the hair dryer, wrap its power cord neatly around the hook located at the bottom of the holder. This keeps the cord tidy and prevents tangling.

This image demonstrates how to neatly store the hair dryer's power cord by wrapping it around the integrated hook located at the bottom of the holder.

5. പരിപാലനം

To clean the hair dryer holder, wipe it with a soft, damp cloth. Avoid using abrasive cleaners or harsh chemicals, as these may damage the finish. Ensure the holder is dry before placing the hair dryer back into it.

6. പ്രശ്‌നപരിഹാരം

6.1 Holder Feels Loose

If the holder feels loose after installation, gently re-tighten the wood screws or re-insert the plasterboard pins to ensure a secure fit. Do not overload the holder beyond its maximum weight capacity.

6.2 Hair Dryer Does Not Fit

Check the dimensions of your hair dryer's handle against the holder's specifications. The holder is designed for handles that are approximately 5 cm wide and have a clearance of at least 1 cm from the dryer body. Hair dryers with handles that are too wide or too close to the body may not fit.

This diagram shows the specific handle dimensions that are not compatible with the holder. Hair dryers with handles less than 1cm from the body or wider than 5cm may not fit properly.

7 സ്പെസിഫിക്കേഷനുകൾ

This diagram provides the precise measurements of the hair dryer holder, including its width (approximately 16 cm), depth (approximately 9.3 cm), and height (approximately 11.8 cm).

8. വാറൻ്റിയും പിന്തുണയും

Specific warranty information for this product is not available in the provided data. For any product inquiries, support, or warranty claims, please contact Yamazaki customer service directly or refer to the product packaging for detailed information.