Gemini GMU-M200 Dual Handheld UHF Wireless Microphone System User Manual

1. ഉൽപ്പന്നം കഴിഞ്ഞുview

The Gemini GMU-M200 is a dual-person handheld UHF wireless microphone system designed for various audio applications. It features two handheld microphones and a compact plug-in receiver, providing wireless audio transmission up to 164 feet (50 meters). This system is suitable for performances, karaoke, weddings, conferences, meetings, and lectures.

Each microphone is equipped with a dynamic mic capsule and a cardioid pickup pattern, which helps to focus on the speaker's voice and minimize background noise and feedback. The dual-channel receiver connects to audio equipment via a standard 1/4" TS plug. Both microphones and the receiver are powered by rechargeable lithium batteries, with convenient USB charging capability.

Image 1.1: Gemini GMU-M200 Wireless Microphone System components, including two handheld microphones and a plug-in receiver.

2. ബോക്സിൽ എന്താണുള്ളത്?

Verify that all components are present before setup.

• 2x Handheld Wireless Microphones (Gemini MT10)
• 1x Plug-in Wireless Receiver (Gemini R10)
• 2x Rechargeable 18650 1200mAh Lithium Batteries (pre-installed in microphones)
• 1x മൈക്രോ-യുഎസ്ബി ചാർജിംഗ് കേബിൾ
• 2x Auray MS-5230F Tripod Microphone Stands with Fixed Boom (Note: These are included as part of the bundle.)
• ഉപയോക്തൃ മാനുവൽ (ഈ പ്രമാണം)

Image 2.1: Included Micro-USB charging cable.

Image 2.2: Two Auray MS-5230F Tripod Microphone Stands included in the bundle.

3. സജ്ജീകരണ നിർദ്ദേശങ്ങൾ

3.1. Microphone Battery Installation and Charging

1. Unscrew the bottom cap of each handheld microphone.
2. Ensure the 18650 1200mAh rechargeable lithium battery is correctly inserted according to polarity markings. The batteries are typically pre-installed.
3. To charge the microphones, connect the micro-USB charging cable to the DC-5V port located at the bottom of each microphone. Connect the other end to a USB power source (e.g., computer USB port, USB wall adapter).
4. The LED display on the microphone will indicate charging status. A full charge provides several hours of use.

Image 3.1: Handheld microphone with the battery compartment open, showing the rechargeable 18650 battery.

ചിത്രം 3.2: ക്ലോസ്-അപ്പ് view of the micro-USB charging port (DC-5V) at the base of the microphone.

3.2. Receiver Charging and Connection

1. The plug-in receiver also contains a rechargeable lithium battery. Charge it using the provided micro-USB cable and a USB power source.
2. Once charged, plug the receiver's 1/4" TS connector directly into the microphone input of your audio device (e.g., PA speaker, amplifier, mixer, karaoke machine).
3. Ensure the audio device's input volume is set to a low level before powering on the receiver.

4. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

4.1. Powering On and Automatic Pairing

1. Press and hold the power button on each handheld microphone to turn them on. The LED display will illuminate.
2. Press and hold the power button on the plug-in receiver to turn it on.
3. The microphones and receiver will automatically pair. A successful connection is indicated by a stable signal indicator on the microphone's LED display.

4.2. വോളിയം ക്രമീകരിക്കുന്നു

• Volume can be controlled directly from the handheld microphones. Refer to the microphone's controls for volume adjustment buttons.
• Additionally, adjust the input volume on your connected audio device (PA speaker, amplifier, mixer) to achieve the desired sound level.

4.3. ഫ്രീക്വൻസികൾ മാറ്റുന്നു

If you experience interference or signal dropouts, you can change the operating frequency:

1. On the handheld microphone, locate the "SET" button.
2. Press the "SET" button to cycle through available UHF frequencies. The LED display will show the current frequency.
3. The receiver will automatically sync to the new frequency selected on the microphone.
4. Select a frequency that provides clear, interference-free audio. The system operates within the 512-541.7 MHz range in the United States.

Image 4.1: Two Gemini MT10 handheld microphones, showing their LED displays and control buttons.

5. പരിപാലനം

5.1. വൃത്തിയാക്കൽ

• മൃദുവായതും ഉണങ്ങിയതുമായ തുണി ഉപയോഗിച്ച് മൈക്രോഫോണുകളും റിസീവറും തുടയ്ക്കുക.
• അബ്രാസീവ് ക്ലീനറുകൾ, ലായകങ്ങൾ, കഠിനമായ രാസവസ്തുക്കൾ എന്നിവ ഉപയോഗിക്കരുത്.
• ഇലക്ട്രോണിക് ഘടകങ്ങളുമായി ഈർപ്പം സമ്പർക്കം ഒഴിവാക്കുക.

5.2. ബാറ്ററി പരിചരണം

• Recharge batteries regularly, even if the system is not in frequent use, to maintain battery health.
• If storing the system for an extended period, charge the batteries to approximately 50% before storage.
• Replace batteries if their performance significantly degrades. Use only approved 18650 rechargeable lithium batteries for the microphones.

6. പ്രശ്‌നപരിഹാരം

• ശബ്ദമില്ല:
  • Ensure microphones and receiver are powered on.
  • Check battery levels on both microphones and receiver. Recharge if necessary.
  • Verify the receiver is securely plugged into the audio device's input.
  • Increase the volume on the microphones and the connected audio device.
  • Confirm that the microphones and receiver are paired (stable signal indicator).
• Interference/Static:
  • Press the "SET" button on the microphone to change to a different operating frequency.
  • Ensure there are no other wireless devices operating on similar frequencies nearby.
  • മൈക്രോഫോണുകളും റിസീവറും തമ്മിലുള്ള ദൂരം കുറയ്ക്കുക.
  • ട്രാൻസ്മിറ്ററിനും റിസീവറിനും ഇടയിലുള്ള ഭൗതിക തടസ്സങ്ങൾ ഒഴിവാക്കുക.
• Short Wireless Range:
  • Ensure line of sight between microphones and receiver for optimal performance.
  • വലിയ ലോഹ വസ്തുക്കൾക്കോ ​​മറ്റ് ഇലക്ട്രോണിക് ഉപകരണങ്ങൾക്കോ ​​സമീപം റിസീവർ വയ്ക്കുന്നത് ഒഴിവാക്കുക, കാരണം അവ തടസ്സമാകാം.
  • Check battery levels. Low batteries can affect range.

7 സ്പെസിഫിക്കേഷനുകൾ

8. വാറൻ്റിയും പിന്തുണയും

For warranty information or technical support, please refer to the official Gemini webസൈറ്റിൽ ബന്ധപ്പെടുകയോ അവരുടെ ഉപഭോക്തൃ സേവന വിഭാഗവുമായി ബന്ധപ്പെടുകയോ ചെയ്യുക. ഏതെങ്കിലും വാറന്റി ക്ലെയിമുകൾക്ക് വാങ്ങിയതിന്റെ തെളിവായി നിങ്ങളുടെ വാങ്ങൽ രസീത് സൂക്ഷിക്കുക.

Gemini Official Webസൈറ്റ്: www.geminisound.com (കുറിപ്പ്: ഇതൊരു പ്ലെയ്‌സ്‌ഹോൾഡറാണ് URL, please verify the actual support webസൈറ്റ്.)