1. ആമുഖം
This manual provides detailed instructions for the installation, operation, and maintenance of your new Paddle Switch Lift Chair or Power Recliner Hand Control, Model HC-6601 FR2. Please read this manual thoroughly before use to ensure proper function and longevity of the product.
2. ഉൽപ്പന്ന സവിശേഷതകൾ
The HC-6601 FR2 hand control is designed for use with lift chairs and power recliners, offering intuitive control over chair movements. Key features include:
- മോഡൽ: HC-6601 FR2
- കണക്റ്റർ: 5-Pin Quick Disconnect Cord with 90-Degree Angle
- ഡിസൈൻ: Black Pear Shape with Toggle Switch
- പ്രവർത്തനക്ഷമത: Controls lift and recline functions of compatible chairs.
Image 1: The HC-6601 FR2 Paddle Switch Hand Control. This image displays the black pear-shaped control unit with its toggle switch, connected to a coiled cord that terminates in a 5-pin, 90-degree angle quick disconnect plug.
3. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
Before installing the hand control, ensure your lift chair or power recliner is unplugged from the power outlet to prevent accidental operation or electrical hazards.
- നിലവിലുള്ള കണക്ഷൻ കണ്ടെത്തുക: Identify the current hand control's connection point on your lift chair or power recliner. This is typically a 5-pin port located near the motor or control box under the chair.
- Disconnect Old Control (if applicable): If replacing an existing control, carefully disconnect its 5-pin plug from the chair's port. Gently pull on the plug, not the cord.
- Connect New Control: Align the 5-pin quick disconnect plug of the HC-6601 FR2 hand control with the corresponding port on your chair. The 90-degree angle of the plug is designed for specific orientations; ensure it is inserted correctly. Push firmly until it clicks into place, ensuring a secure connection.
- ചരട് റൂട്ട്: Carefully route the control cord to a convenient location, ensuring it does not interfere with the chair's moving parts or pose a tripping hazard.
- പവർ പുന ore സ്ഥാപിക്കുക: Once the hand control is securely connected and the cord is routed, plug your lift chair or power recliner back into the power outlet.
മുന്നറിയിപ്പ്: Do not force the plug into the port. Incorrect insertion can damage the pins or the port.
4. ഓപ്പറേഷൻ
The HC-6601 FR2 hand control features a simple toggle switch for operating your lift chair or power recliner.
- റീക്ലൈൻ ഫംഗ്ഷൻ: To recline the chair, press and hold the താഴേക്കുള്ള അമ്പടയാളം (▼) on the toggle switch. Release the switch when the desired recline position is reached.
- Lift/Upright Function: To bring the chair to an upright or lift position, press and hold the മുകളിലേക്കുള്ള അമ്പടയാളം (▲) on the toggle switch. Release the switch when the desired position is reached. For lift chairs, continue holding until the chair reaches its full lift position, assisting the user to stand.
പ്രധാനപ്പെട്ടത്: Always ensure there are no obstructions around the chair before operating. Keep children and pets away from moving parts.
5. പരിപാലനം
Proper care will extend the life of your hand control. The HC-6601 FR2 requires minimal maintenance.
- വൃത്തിയാക്കൽ: ഒരു സോഫ്റ്റ് ഉപയോഗിച്ച് തുടച്ചു വൃത്തിയാക്കുക, ഡിamp cloth. Do not use abrasive cleaners, solvents, or excessive moisture, as this can damage the electrical components.
- ചരട് പരിശോധന: Periodically inspect the cord for any signs of wear, fraying, or damage. If damage is observed, discontinue use immediately and replace the hand control.
- സംഭരണം: When not in use for extended periods, store the hand control in a dry, cool place, away from direct sunlight and extreme temperatures.
6. പ്രശ്നപരിഹാരം
If your hand control is not functioning as expected, refer to the following common issues and solutions:
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| Chair does not respond to control. | Chair not plugged in. അയഞ്ഞ കണക്ഷൻ. പവർ യൂtage. Damaged hand control. | Ensure chair is securely plugged into a working outlet. Check that the 5-pin connector is fully inserted. Verify power is available to the outlet. Inspect the hand control and cord for visible damage. If damaged, replacement may be necessary. |
| Chair moves intermittently. | അയഞ്ഞ കണക്ഷൻ. Frayed cord. | Ensure the 5-pin connector is fully inserted and secure. Inspect the cord for any breaks or fraying. Replace if damaged. |
| Toggle switch feels sticky or unresponsive. | Debris or liquid ingress. Internal mechanism wear. | Ensure the switch area is clean. Do not attempt to disassemble. If cleaning does not resolve the issue, the control may need replacement. |
If troubleshooting steps do not resolve the issue, contact a qualified technician or the product supplier for assistance. Do not attempt to repair electrical components yourself.
7 സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | വിശദാംശങ്ങൾ |
|---|---|
| മോഡൽ നമ്പർ | HC-6601 FR2 |
| യുമായി പൊരുത്തപ്പെടുന്നു | Lift Chairs, Power Recliners |
| കണക്റ്റർ തരം | 5-Pin Quick Disconnect, 90-Degree Angle |
| നിയന്ത്രണ തരം | Toggle Switch (Up/Down Arrows) |
| നിറം | കറുപ്പ് |
| ഫോം ഫാക്ടർ | Pear Shape Hand Control |
| ഉൽപ്പന്ന അളവുകൾ (ഏകദേശം) | 1"D x 2"W x 4"H (Control Unit) |
| മെറ്റീരിയൽ | പ്ലാസ്റ്റിക് |
| ജിടിഐഎൻ (യുപിസി) | 00817931022731 |
8. വാറൻ്റിയും പിന്തുണയും
For information regarding warranty coverage, returns, or technical support for your HC-6601 FR2 hand control, please refer to the purchase documentation or contact the seller directly. Keep your proof of purchase for any warranty claims.
വിൽപ്പനക്കാരൻ: Medical Center Supply-Same Day Shipping!!!
തിരികെ നൽകൽ നയം: 30-day refund/replacement policy from the seller.
Note: Warranty terms may vary based on the retailer and region.
