Supra Oscar Wood Stove User Manual

1. ആമുഖം

This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Supra Oscar wood stove. Please read this manual thoroughly before installing or operating the appliance. Retain this manual for future reference.

2 സുരക്ഷാ വിവരങ്ങൾ

മുന്നറിയിപ്പ്: അനുചിതമായ ഇൻസ്റ്റാളേഷൻ, ക്രമീകരണം, മാറ്റം, സേവനം, അല്ലെങ്കിൽ അറ്റകുറ്റപ്പണികൾ എന്നിവ വസ്തുവകകൾക്ക് കേടുപാടുകൾക്കോ ​​പരിക്കുകൾക്കോ ​​മരണത്തിനോ കാരണമാകും. ഈ ഉപകരണം ഇൻസ്റ്റാൾ ചെയ്യുന്നതിനോ അല്ലെങ്കിൽ സർവീസ് ചെയ്യുന്നതിനോ മുമ്പ് ഇൻസ്റ്റാളേഷൻ, ഓപ്പറേറ്റിംഗ്, മെയിന്റനൻസ് നിർദ്ദേശങ്ങൾ നന്നായി വായിക്കുക.

• കാർബൺ മോണോക്സൈഡ് വിഷബാധ തടയാൻ എല്ലായ്പ്പോഴും മതിയായ വായുസഞ്ചാരം ഉറപ്പാക്കുക.
• Maintain required clearances to combustible materials as specified by local building codes and the stove's installation instructions.
• Only burn approved dry, seasoned wood. Do not burn trash, plastics, treated wood, or flammable liquids.
• Keep children and pets away from the hot surfaces of the stove.
• Install smoke detectors and carbon monoxide detectors in your home.
• Never leave the stove unattended during operation.

3. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

Installation of your Supra Oscar wood stove must be performed by a qualified professional in accordance with all local and national building and fire codes. Failure to comply with these regulations can result in fire, property damage, or personal injury.

3.1 സൈറ്റ് തിരഞ്ഞെടുക്കൽ

Choose a location that allows for proper chimney connection and maintains required clearances from combustible walls, furniture, and other materials. The floor beneath the stove must be constructed of non-combustible material or protected by an approved floor protector.

3.2 Chimney and Flue Pipe

Ensure the chimney system is correctly sized, in good condition, and regularly inspected. Use only approved flue pipes and connectors. All connections must be sealed properly to prevent smoke leakage.

ചിത്രം 1: മുൻഭാഗം view of the Supra Oscar wood stove, showcasing the firebox door and air vents. This image illustrates the primary access point for loading fuel and managing the fire.

4. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

4.1 First Use (Curing the Paint)

During the first few fires, the stove's paint will cure, emitting an odor and possibly some smoke. Ensure good ventilation during this period. Start with small fires and gradually increase the heat over several days to allow the paint to cure properly and prevent damage to the finish.

4.2 Loading Fuel

1. Open the primary air control fully.
2. Place crumpled newspaper or firelighters at the bottom of the firebox.
3. Stack small pieces of kindling on top of the newspaper/firelighters.
4. Light the newspaper/firelighters.
5. Once the kindling is burning well, gradually add larger pieces of seasoned wood.
6. Close the door securely once the fire is established.

4.3 എയർ കൺട്രോൾ

The Supra Oscar wood stove features primary and secondary air controls to regulate combustion. The primary air control (usually located at the bottom of the door) is used for starting fires and for rapid heat output. The secondary air control (often located above the door or on the sides) introduces preheated air for more complete combustion, reducing emissions and increasing efficiency. Adjust these controls to achieve the desired burn rate and heat output.

4.4 ഇന്ധനം നിറയ്ക്കൽ

When refueling, open the primary air control fully for a few minutes before opening the stove door to prevent smoke spillage. Open the door slowly, add new fuel, and then close the door securely. Adjust air controls as needed.

5. പരിപാലനം

Regular maintenance ensures the safe and efficient operation of your wood stove.

5.1 ആഷ് നീക്കം

Remove ash regularly, typically when the ash bed is 2-3 cm deep. Use a metal shovel and place ashes in a metal container with a tight-fitting lid, away from combustible materials. Ensure ashes are completely cold before disposal.

5.2 Cleaning the Glass

If the glass becomes dirty, allow the stove to cool completely. Use a damp cloth dipped in fine wood ash or a specialized glass cleaner for wood stoves. Avoid abrasive cleaners that can scratch the glass.

5.3 Chimney Cleaning

The chimney and flue pipe should be inspected and cleaned at least once a year, or more frequently if burning resinous wood or experiencing heavy creosote buildup. This should be performed by a certified chimney sweep.

5.4 വാർഷിക പരിശോധന

Have your stove and chimney system inspected annually by a qualified professional. They can check for wear and tear, proper seals, and overall safety.

6. പ്രശ്‌നപരിഹാരം

• Smoke Spillage: Ensure the chimney is clear, the flue damper is open, and the door is not opened too quickly. Check for downdrafts.
• Poor Draft: May indicate a blocked chimney, cold chimney, or insufficient air supply to the room.
• കുറഞ്ഞ താപ ഔട്ട്പുട്ട്: Ensure you are burning dry, seasoned wood. Check air control settings and chimney draft.
• Excessive Creosote Buildup: Often caused by burning wet wood or operating the stove at too low a temperature. Increase burn temperature and ensure wood is dry.

7 സ്പെസിഫിക്കേഷനുകൾ

8. വാറൻ്റിയും പിന്തുണയും

For warranty information and technical support, please refer to the documentation provided at the time of purchase or contact your authorized Supra dealer. Keep your proof of purchase for warranty claims.

Figure 2: The Supra Oscar wood stove installed in a living space, demonstrating its compact design and integration into a modern interior. This image provides a visual context for the stove's appearance in a home environment.