VEDINDUST HDMI Extender Splitter 1 in 8 Out User Manual

ആമുഖം

The VEDINDUST HDMI Extender Splitter is designed to extend HDMI audio/video signals up to 1080p@60Hz to eight simultaneous video outputs. It utilizes Cat6/7 Ethernet cables for long-distance transmission and includes one HDMI loop output. This device is suitable for various applications such as education, digital signage, conference rooms, and home theater systems.

പാക്കേജ് ഉള്ളടക്കം

താഴെ ലിസ്റ്റ് ചെയ്തിരിക്കുന്ന എല്ലാ ഇനങ്ങളും നിങ്ങളുടെ പാക്കേജിൽ ഉൾപ്പെടുത്തിയിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക:

• 1x HDMI Extender Splitter (Transmitter)
• 8x HDMI Extender Receivers
• 1x DC12V Power Adapter
• 2x Fixed Brackets
• 1x ഉപയോക്തൃ മാനുവൽ

Image: The package includes the main transmitter unit, eight receiver units, a DC12V power adapter, two fixed brackets, and a user manual.

ഉൽപ്പന്നം കഴിഞ്ഞുview

The VEDINDUST HDMI Extender Splitter system consists of a Transmitter (TX) unit and eight Receiver (RX) units. Familiarize yourself with the ports and indicators on both units.

ട്രാൻസ്മിറ്റർ (TX) യൂണിറ്റ്

• വൈദ്യുതി സ്വിച്ച്: ഉപകരണം ഓണാക്കുകയോ ഓഫാക്കുകയോ ചെയ്യുന്നു.
• RJ45 CAT6/7 Output Ports (CAT1-CAT8): Connect to the Receiver units via Cat6/7 Ethernet cables.
• എച്ച്ഡി‌എം‌ഐ IN: Connects to the HDMI source device.
• HDMI ലൂപ്പ് ഔട്ട്: Provides a local HDMI output for monitoring or connecting an additional display.
• DC12V: പവർ ഇൻപുട്ട് പോർട്ട്.
• LED സൂചകം: Displays power and signal status.
• EDID ക്രമീകരണം: DIP switches for EDID management.

റിസീവർ (RX) യൂണിറ്റ്

• എച്ച്ഡിഎംഐ പുറത്ത്: Connects to the display device.
• RJ45 CAT6/7 Input Port: Connects to the Transmitter unit via a Cat6/7 Ethernet cable.
• LED സൂചകം: Displays power and signal status.

ചിത്രം: വിശദമായത് view of the Transmitter (TX) unit's front and back panels, highlighting the power switch, RJ45 output ports, HDMI input/loop out, DC12V power, LED indicators, and EDID settings. Also shows the Receiver (RX) unit with its HDMI output, RJ45 input, and LED indicator.

സജ്ജീകരണ നിർദ്ദേശങ്ങൾ

Follow these steps to set up your HDMI Extender Splitter system:

1. HDMI ഉറവിടം ബന്ധിപ്പിക്കുക: Connect your HDMI source device (e.g., Blu-ray player, PC, game console) to the HDMI-IN port on the Transmitter (TX) unit using an HDMI cable.
2. Connect Local Display (Optional): If desired, connect a local HDMI display to the HDMI ലൂപ്പ് ഔട്ട് port on the Transmitter (TX) unit using an HDMI cable.
3. Connect Receivers: Connect each of the eight Receiver (RX) units to the RJ45 CAT6/7 Output Ports (CAT1-CAT8) on the Transmitter (TX) unit using individual Cat6 or Cat7 Ethernet cables. Ensure the cabling method is 568B for optimal performance, especially for distances up to 50 meters (165 feet).
4. ഡിസ്പ്ലേകൾ ബന്ധിപ്പിക്കുക: Connect each Receiver (RX) unit to its respective display device (e.g., TV, monitor, projector) using an HDMI cable.
5. പവർ ഓൺ: Connect the provided DC12V power adapter to the DC12V port on the Transmitter (TX) unit. Plug the adapter into a power outlet.
6. സജീവമാക്കുക: Turn on the Power Switch on the Transmitter (TX) unit. The LED indicators on both the Transmitter and Receiver units should illuminate, indicating power and signal presence.

Note on Power Over Cable (POC): The system utilizes POC technology, meaning only the Transmitter (TX) unit requires external power. The Receiver (RX) units receive power through the Ethernet cable from the Transmitter.

Image: A schematic diagram illustrating the complete setup, from the HDMI input source to the Transmitter, then distributing the signal via Cat6/7 cables to eight Receiver units, each connected to an HDMI output display. An additional HDMI loop out from the Transmitter is also depicted.

Image: This image highlights the Power Over Cable (POC) feature, showing the DC12V power connection to the Transmitter and an RX unit receiving power directly through the network cable, eliminating the need for a separate power supply for the receivers.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Once the system is set up, ensure all devices are powered on. The HDMI Extender Splitter will automatically detect and transmit the HDMI signal.

EDID മാനേജുമെന്റ്

The Transmitter unit features EDID (Extended Display Identification Data) management via DIP switches. EDID allows the source device to recognize the display's capabilities (resolution, audio formats). Adjusting these settings can improve compatibility and optimize video/audio output.

Refer to the table below for EDID mode specifications:

Image: This image displays the EDID DIP switch configuration on the Transmitter unit, along with a table that specifies different EDID modes (e.g., 1080P 2CH, 1080P 7.1CH, 3D 2CH, 3D 5.1CH, 3D 7.1CH, 1920x1200 2CH, Copy HDMI OUT) and their corresponding switch positions (000 to 111).

ശുപാർശ: If using the EDID COPY mode (111), connect the HDMI OUT port to the display with the lowest resolution to ensure compatibility across all connected displays.

മെയിൻ്റനൻസ്

To ensure the longevity and optimal performance of your VEDINDUST HDMI Extender Splitter, follow these maintenance guidelines:

• വൃത്തിയാക്കൽ: ഉപകരണം വൃത്തിയാക്കാൻ മൃദുവായതും ഉണങ്ങിയതുമായ തുണി ഉപയോഗിക്കുക. ലിക്വിഡ് അല്ലെങ്കിൽ എയറോസോൾ ക്ലീനറുകൾ ഉപയോഗിക്കരുത്.
• വെൻ്റിലേഷൻ: Ensure the device is placed in a well-ventilated area. The metal casing with cooling holes is designed for heat dissipation. Do not block ventilation openings.
• ശക്തി: Always use the provided DC12V power adapter. Disconnect power during lightning storms or when unused for long periods.
• പരിസ്ഥിതി: Avoid exposing the device to excessive moisture, extreme temperatures, or direct sunlight.

ട്രബിൾഷൂട്ടിംഗ്

If you encounter issues with your HDMI Extender Splitter, refer to the following common problems and solutions:

പവർ ഇല്ല

• പവർ അഡാപ്റ്റർ പരിശോധിക്കുക: Verify that the power adapter is securely plugged into a working power outlet and into the DC12V port on the Transmitter unit.
• വൈദ്യുതി സ്വിച്ച്: Ensure the power switch on the Transmitter unit is in the "ON" position.
• പവർ സൂചകം: Check if the power LED indicator on the Transmitter unit is illuminated.

No Image or Incorrect Image Display

• സിഗ്നൽ സൂചകം: Verify that the green signal indicator LED on both the Transmitter and Receiver units is illuminated.
• കേബിൾ നീളം: Ensure that the Cat6/7 network cables used for extension are less than 50 meters (165 feet) in length.
• Cable Type and Wiring: Use high-quality Cat6 or Cat7 oxygen-free copper cables with 568B wiring for optimal performance.
• HDMI Cables: Check all HDMI cable connections between source, Transmitter, Receivers, and displays. Ensure they are securely connected and not damaged.
• EDID ക്രമീകരണങ്ങൾ: Adjust the EDID DIP switches on the Transmitter unit to match the capabilities of your displays. If using multiple displays, try setting the EDID to "Copy HDMI OUT" (111) and connect the HDMI OUT port to the display with the lowest resolution.
• ഡിസ്പ്ലേ ഇൻപുട്ട്: Confirm that your display devices are set to the correct HDMI input source.
• റെസല്യൂഷൻ അനുയോജ്യത: Ensure your source device's output resolution is compatible with your displays and the extender's capabilities (up to 1080p@60Hz).

സ്പെസിഫിക്കേഷനുകൾ