Full House Caregiver Pager Wireless Call Button System Instruction Manual

ആമുഖം

The Full House Caregiver Pager System is designed to provide a simple and efficient way for individuals requiring assistance, such as the elderly, disabled, or sick, to alert their caregivers. This system eliminates the need for shouting and offers peace of mind for both parties. It is suitable for various environments including private homes, hospitals, and nursing homes.

പ്രധാന സവിശേഷതകളിൽ ഇവ ഉൾപ്പെടുന്നു:

• വിപുലീകരിച്ച വയർലെസ് ശ്രേണി: Up to 1000 feet in open areas, or approximately 500 feet with walls, ensuring reliable communication throughout a home or facility.
• ഇഷ്ടാനുസൃതമാക്കാവുന്ന അലേർട്ടുകൾ: Choose from 52 melodies and 5 volume levels (0dB to 110dB), including a silent mode with only an LED flash.
• മോടിയുള്ള ഡിസൈൻ: The call button is IP55 splash-proof, making it suitable for bathroom use (though not for immersion).
• ബഹുമുഖ പ്ലെയ്‌സ്‌മെന്റ്: The call button can be worn as a necklace, placed in a pocket, or affixed to a wall or wheelchair.

Figure 1: Illustration of the wireless range, demonstrating signal coverage across various distances and through walls.

സജ്ജമാക്കുക

1. ഘടകങ്ങൾ കഴിഞ്ഞുview

The Full House Caregiver Pager System typically includes one plug-in receiver and one or more call buttons (transmitters). Each call button comes with a lanyard for portability.

Figure 2: The plug-in receiver and call button.

2. Powering the Receiver

Plug the receiver into any standard electrical outlet. The receiver will power on automatically.

Figure 3: Receiver plugged into an electrical outlet.

3. Pairing Call Buttons (if necessary)

The call buttons and receiver are typically pre-paired from the factory. If re-pairing is needed or if adding new call buttons, follow these steps:

1. റിസീവർ പ്ലഗ് ഇൻ ചെയ്യുക.
2. Press and hold the volume button on the receiver until its LED light illuminates.
3. While the receiver's LED is lit, press the call button you wish to pair. The receiver will chime, indicating successful pairing.

4. Mounting the Call Button

The call button can be placed in a pocket, worn around the neck using the included lanyard, or mounted to a surface using the provided adhesive stickers or screws.

Figure 4: Various applications and placement options for the call button.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

1. ഒരു കോൾ ചെയ്യുന്നു

To alert the caregiver, simply press the large button on the call button (transmitter). The receiver will then activate with the selected melody and LED flash.

2. വോളിയം ക്രമീകരിക്കുന്നു

The receiver offers 5 levels of volume adjustment, ranging from 0dB (silent with LED flash) to 110dB. To adjust the volume, press the dedicated volume button on the side of the receiver. Each press cycles through the available volume levels.

Figure 5: Volume levels and their suitability for different environments.

3. മാറ്റുന്ന ഈണങ്ങൾ

The receiver has 52 different tunes to choose from. To change the melody, press the music note button on the side of the receiver. Continue pressing until you find your preferred tune.

4. Using Multiple Call Buttons with Different Tones

If you have multiple call buttons, you can assign a unique tone to each one to distinguish the source of the call. This is useful for identifying which room or person is requesting assistance.

മെയിൻ്റനൻസ്

1. കോൾ ബട്ടൺ ബാറ്ററി മാറ്റിസ്ഥാപിക്കൽ

The call button uses one CR2032 battery. When the button no longer lights up or the signal range decreases, it may be time to replace the battery. To replace the battery:

1. Carefully open the call button casing using a small screwdriver or similar tool.
2. പഴയ CR2032 ബാറ്ററി നീക്കം ചെയ്യുക.
3. ശരിയായ ധ്രുവീകരണം ഉറപ്പാക്കിക്കൊണ്ട് ഒരു പുതിയ CR2032 ബാറ്ററി ചേർക്കുക.
4. സി അടയ്ക്കുകasinഗ്രാം സുരക്ഷിതമായി.

Figure 6: Steps for replacing the CR2032 battery in the call button.

2. ജല പ്രതിരോധം

The call button is IP55 splash-proof, meaning it can withstand splashes of water and is suitable for use in environments like bathrooms. However, it is not designed to be immersed in water. Please remove the call button before bathing or showering to prevent damage.

Figure 7: The call button's IP55 waterproof rating.

ട്രബിൾഷൂട്ടിംഗ്

• റിസീവറിൽ നിന്ന് ശബ്ദമില്ല: Check the volume setting on the receiver. Ensure it is not set to 0dB (silent mode).
• Call Button Not Activating Receiver:
  1. Verify the call button's battery. Replace if necessary.
  2. Ensure the call button is within the operational range of the receiver. Obstacles like thick walls can reduce range.
  3. Re-pair the call button with the receiver following the 'Pairing Call Buttons' instructions in the Setup section.
• ഇടപെടൽ: If experiencing inconsistent performance, try relocating the receiver to a different outlet, away from large metal objects or other wireless devices that might cause interference.

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റിയും പിന്തുണയും

For warranty information or technical support, please refer to the product packaging or contact Full House customer service directly. Keep your purchase receipt for any warranty claims.