Instruction Manual for Red Visual Signal Indicator

ആമുഖം

Welcome to the instruction manual for your new Red Visual Signal Indicator (Model: LEDS100-03-02). This device is designed to provide clear visual signaling for various applications, offering both continuous and flashing light modes. Please read this manual thoroughly before installation and operation to ensure safe, correct, and efficient usage of the product.

സുരക്ഷാ വിവരങ്ങൾ

പൊതു സുരക്ഷാ മുൻകരുതലുകൾ

• Always disconnect power before attempting any installation, maintenance, or repair procedures.
• വൈദ്യുതി വിതരണം വോളിയം ഉറപ്പാക്കുകtage matches the device's specifications (85V). Incorrect voltage can damage the unit and pose a safety risk.
• Do not expose the device to extreme temperatures, direct sunlight for prolonged periods, or excessive moisture. This product is not designed for submersible use.
• Consult a qualified electrician if you are unsure about any wiring or installation steps.
• കുട്ടികൾക്ക് ലഭ്യമാകാതെ സൂക്ഷിക്കുക.

പാക്കേജ് ഉള്ളടക്കം

താഴെ ലിസ്റ്റ് ചെയ്തിരിക്കുന്ന എല്ലാ ഇനങ്ങളും നിങ്ങളുടെ പാക്കേജിൽ ഉൾപ്പെടുത്തിയിട്ടുണ്ടെന്ന് ദയവായി പരിശോധിക്കുക:

• 1 x Red Visual Signal Indicator (LEDS100-03-02)
• 1 x ഇൻസ്ട്രക്ഷൻ മാനുവൽ (ഈ ഡോക്യുമെന്റ്)

സജ്ജമാക്കുക

ഇൻഡിക്കേറ്റർ മൗണ്ട് ചെയ്യുന്നു

1. Choose a stable, flat, and visible location for mounting the indicator. Ensure the surface can support the weight of the unit.
2. Allow adequate space around the unit for proper ventilation and access for wiring.
3. Secure the indicator firmly to the chosen surface using appropriate fasteners (not included). Ensure it is stable and will not vibrate loose.

വയറിംഗ് ഡയഗ്രം

The device operates on an 85V power supply. Follow the steps below for correct wiring:

1. Ensure the power source is disconnected before beginning any wiring.
2. Identify the power input terminals on the indicator.
3. Connect the 85V power supply wires to the designated terminals. For AC power, polarity is generally not critical, but ensure connections are secure.
4. If the unit has a mode selection switch for continuous or flashing operation, set it to your desired mode before applying power. Refer to any labels on the unit for specific switch positions.

This image shows the red visual signal indicator, featuring a translucent red dome atop a black cylindrical base. The dome has vertical ridges designed for light diffusion, enhancing visibility. This is the main unit that requires mounting and electrical wiring for operation.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

പവർ ചെയ്യുന്നു

Once the indicator is securely mounted and correctly wired, apply the 85V power to the circuit. The unit will immediately begin operating in its selected mode (continuous or flashing).

ഓപ്പറേഷൻ മോഡുകൾ

The LEDS100-03-02 supports two primary operation modes:

• തുടർച്ചയായ മോഡ്: The red light will remain steadily illuminated as long as power is supplied.
• ഫ്ലാഷിംഗ് മോഡ്: The red light will flash at a regular interval, providing an intermittent visual signal.

The selection between these modes is typically done via an internal switch or specific wiring configuration as detailed in the 'Setup' section. Ensure the desired mode is set before applying power.

മെയിൻ്റനൻസ്

വൃത്തിയാക്കൽ

To clean the exterior of the indicator, gently wipe it with a soft, dry, or slightly damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the plastic housing and lens.

പരിശോധന

Periodically inspect the unit for any signs of physical damage, such as cracks in the housing or lens. Check all wiring connections to ensure they remain secure and free from corrosion or fraying. Ensure the mounting remains stable and secure.

ട്രബിൾഷൂട്ടിംഗ്

If you encounter issues with your Red Visual Signal Indicator, please refer to the following troubleshooting guide:

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റിയും പിന്തുണയും

For information regarding product warranty, returns, or technical support, please refer to the terms and conditions provided by your retailer or contact the manufacturer directly. It is recommended to keep your purchase receipt or proof of purchase for any warranty claims.