OKPRO O-168XBJ

OKPRO Solar Lights Outdoor (2 Pack) - 168LED 6500K Flood Light Instruction Manual

1. ആമുഖം

Thank you for choosing the OKPRO Solar Lights Outdoor. This product is designed to provide efficient and reliable outdoor illumination using solar power, featuring motion sensing capabilities and multiple lighting modes. This manual will guide you through the installation, operation, and maintenance of your new solar lights.

OKPRO Solar Light, front view

ചിത്രം 1: മുൻഭാഗം view of the OKPRO Solar Light, showcasinജി അതിന്റെ ഒസിtagonal design and LED arrangement.

2. ബോക്സിൽ എന്താണുള്ളത്?

എല്ലാ ഇനങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കാൻ പാക്കേജ് ഉള്ളടക്കങ്ങൾ പരിശോധിക്കുക:

  • Lamp body (2 units)
  • Lamp post/Mounting bracket (2 units)
  • Screw accessories (for installation)
  • Remote Control (2 units)
  • നിർദ്ദേശ മാനുവൽ (ഈ പ്രമാണം)

വീഡിയോ 1: ഒരു ഓവർview of the OKPRO Solar Light, demonstrating its features and components.

3 പ്രധാന സവിശേഷതകൾ

  • Upgraded Octagonal Design: Equipped with 168 super LED beads for 360° wide-angle illumination without blind spots.
  • ഉയർന്ന കാര്യക്ഷമതയുള്ള സോളാർ പാനൽ: Features polycrystalline silicon photovoltaic panels with a 20% increased photoelectricity conversion rate.
  • 180° ക്രമീകരിക്കാവുന്ന ബ്രാക്കറ്റ്: Allows for optimal positioning of the solar panel to maximize daylight charging.
  • ഡ്യൂറബിൾ & വാട്ടർപ്രൂഫ്: Constructed from high-impact resistant ABS material with an IP66 waterproof rating, suitable for various outdoor environments.
  • Intelligent Radar Motion Sensor: Offers three distinct lighting modes for customizable operation.
  • റിമോട്ട് കൺട്രോൾ: Conveniently adjust settings and modes from a distance.
Eight Sides Full 360 Degree Lighting

Figure 2: Illustration of the light's octagonal design providing 360-degree illumination.

Super Bright 168 LED Lamp മുത്തുകൾ

ചിത്രം 3: ക്ലോസപ്പ് view of the 168 super bright LED lamp മുത്തുകൾ.

New Upgraded Solar Panel

Figure 4: Depiction of the upgraded solar panel with improved efficiency.

IP66 വാട്ടർപ്രൂഫ് റേറ്റിംഗ്

Figure 5: Visual representation of the IP66 waterproof rating, ensuring durability in various weather conditions.

4. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

Follow these steps to properly set up and install your OKPRO Solar Lights:

  1. പ്രാരംഭ ചാർജ്: Before first use, ensure the solar panel is exposed to direct sunlight for 8-12 hours to fully charge the internal batteries. This allows the light to function normally.
  2. ഒരു ലൊക്കേഷൻ തിരഞ്ഞെടുക്കുക: Select an outdoor location where the solar panel can receive direct sunlight for most of the day. Avoid areas with overhead obstructions like trees or buildings that might reduce charging efficiency.
  3. Assemble the Bracket: എൽ അറ്റാച്ചുചെയ്യുകamp body to the mounting bracket using the provided screws. The bracket allows for 180° adjustment to optimize solar panel angle and light direction.
  4. വെളിച്ചം മൌണ്ട് ചെയ്യുക: Use the included screw accessories to securely mount the light to a wall or lamp post. Ensure the mounting surface is stable.
  5. ആംഗിൾ ക്രമീകരിക്കുക: Once mounted, adjust the angle of the solar panel to face the sun for maximum exposure. Adjust the light head to illuminate the desired area.
Solar light with adjustable bracket

Figure 6: The solar light with its adjustable mounting bracket, ready for installation.

Remote control for solar light

Figure 7: The remote control for adjusting light modes and settings.

5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Your OKPRO Solar Light features an intelligent radar motion sensor and can be controlled via the included remote. It offers three distinct lighting modes:

  • Mode 1 (Motion Activated Full Brightness, then OFF): The light remains off until motion is detected. When motion is detected, the light turns on at 100% brightness. It automatically turns off when no motion is detected for a period.
  • Mode 2 (Motion Activated Full Brightness, then Dim): The light stays at 30% brightness at night. When motion is detected, it brightens to 100%. After 30 seconds of no motion, it returns to 30% brightness.
  • Mode 3 (Constant 50% Brightness): The light automatically turns on at night at a constant 50% brightness and stays on until dawn or battery depletion.

Use the remote control to select your desired mode (Mode 1, Mode 2, Mode 3 buttons). The remote also has ON/OFF buttons and timer settings (e.g., 3hrs/5hrs to sensor, 4hrs constant light).

Diagram of the three control modes

Figure 8: Visual explanation of the three available lighting control modes.

6. പരിപാലനം

To ensure optimal performance and longevity of your solar lights, consider the following maintenance tips:

  • വൃത്തിയുള്ള സോളാർ പാനൽ: പതിവായി സോഫ്റ്റ്, ഡി ക്ലീനർ ഉപയോഗിച്ച് സോളാർ പാനൽ തുടയ്ക്കുക.amp പൊടി, അഴുക്ക് അല്ലെങ്കിൽ അവശിഷ്ടങ്ങൾ നീക്കം ചെയ്യാൻ തുണി ഉപയോഗിക്കുക. വൃത്തിയുള്ള പാനൽ പരമാവധി സൂര്യപ്രകാശം ആഗിരണം ചെയ്യുന്നതും ചാർജിംഗ് കാര്യക്ഷമതയും ഉറപ്പാക്കുന്നു.
  • തടസ്സങ്ങൾ മായ്‌ക്കുക: Periodically check for any new obstructions (e.g., growing branches, new structures) that might block sunlight from reaching the solar panel.
  • ബാറ്ററി കെയർ: The integrated lithium-ion batteries are designed for long-term use. Avoid fully discharging the batteries frequently to prolong their lifespan.

7. പ്രശ്‌നപരിഹാരം

If your solar light is not functioning as expected, try the following:

  • രാത്രിയിൽ ലൈറ്റ് കത്തുന്നില്ല:
    • Ensure the light has received sufficient direct sunlight for charging (8-12 hours recommended for initial use).
    • Verify that the solar panel is not obstructed by dirt, leaves, or shadows.
    • Check if the light is set to the correct operating mode using the remote control.
  • മോഷൻ സെൻസർ പ്രവർത്തിക്കുന്നില്ല:
    • Confirm the light is in Mode 1 or Mode 2, which utilize the motion sensor.
    • സെൻസർ വൃത്തിയുള്ളതും തടസ്സമില്ലാത്തതുമാണെന്ന് ഉറപ്പാക്കുക.
    • Test the sensor by moving within its detection range after dark.
  • Light is Dim or Short-Lived:
    • The solar panel may not be receiving enough direct sunlight. Relocate the light or clear any obstructions.
    • The battery may not be fully charged. Allow for several days of full sun exposure.
    • ഉയർന്ന താപനില ബാറ്ററി പ്രകടനത്തെ ബാധിച്ചേക്കാം.

8 സ്പെസിഫിക്കേഷനുകൾ

ആട്രിബ്യൂട്ട്വിശദാംശങ്ങൾ
ബ്രാൻഡ്OKPRO
മോഡലിൻ്റെ പേര്solar street light
ഇനം മോഡൽ നമ്പർO-168XBJ
നിറംകറുപ്പ്
മെറ്റീരിയൽഅക്രിലോണിട്രൈൽ ബ്യൂട്ടാഡൈൻ സ്റ്റൈറൈൻ
ശൈലിആധുനികം
ലൈറ്റ് ഫിക്‌ചർ ഫോംഫ്ലഡ്ലൈറ്റ്
മുറിയുടെ തരംഔട്ട്ഡോർ
ഉൽപ്പന്ന അളവുകൾ7.87"L x 1.18"W x 13.58"H
ഉൽപ്പന്നത്തിൻ്റെ പ്രത്യേക ഉപയോഗങ്ങൾഔട്ട്ഡോർ ഉപയോഗം മാത്രം
പവർ ഉറവിടംസൗരോർജ്ജം
ഇൻസ്റ്റലേഷൻ തരംമതിൽ മൗണ്ട്
പ്രത്യേക സവിശേഷതകൾEnergy Efficient, Motion Sensor, Timer, Waterproof
നിയന്ത്രണ രീതിറിമോട്ട്
പ്രകാശ സ്രോതസ്സ് തരംഎൽഇഡി
പ്രകാശ സ്രോതസ്സുകളുടെ എണ്ണം168
വാല്യംtage6 വോൾട്ട്
ഇളം നിറംവെള്ള (6500 കെൽവിൻ)
ഇനത്തിൻ്റെ ഭാരം2.1 പൗണ്ട്
ഇനങ്ങളുടെ എണ്ണം2
വാട്ട്tage300 വാട്ട്സ്
തെളിച്ചം1200 Lumen (advertised) / 30000 Lumens (max output)
ജല പ്രതിരോധ നിലവാട്ടർപ്രൂഫ് (IP66)
ബാറ്ററികൾ2 ലിഥിയം അയോൺ ബാറ്ററികൾ ആവശ്യമാണ് (ഉൾപ്പെടുത്തിയിരിക്കുന്നു)

9. വാറണ്ടിയും പിന്തുണയും

OKPRO street lights are warranted for 2 years. This is a limited warranty. Our solar street lights are FCC, CE, and RoHS certified, ensuring product quality and safety.

If you have any questions or require support regarding your LED solar street lights, please feel free to contact us.

© 2026 OKPRO. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.