OKPRO O-168XBJ

OKPRO O-168XBJ Solar Outdoor Lights User Manual

Model: O-168XBJ

ആമുഖം

Thank you for choosing the OKPRO O-168XBJ Solar Outdoor Lights. This manual provides essential information for the proper setup, operation, and maintenance of your new solar lights. Please read these instructions carefully before installation and retain them for future reference.

ഉൽപ്പന്നം കഴിഞ്ഞുview

The OKPRO O-168XBJ Solar Outdoor Lights are designed to provide efficient and reliable outdoor illumination. Featuring an octagonal design with 168 super bright LED beads, these lights offer 360° wide-angle lighting without blind spots. Equipped with an intelligent radar motion sensor and a 180° adjustable bracket, they are ideal for various outdoor applications such as yards, pools, and pathways. The IP66 waterproof rating ensures durability against diverse weather conditions.

OKPRO Solar Street Outdoor Lights highlighting features like Dusk to Dawn, PIR Sensor, Remote Control, 0 electricity bill, High Conversion, and 10+ Hours Endurance.

Image: Key features of the OKPRO Solar Street Outdoor Lights.

ബോക്സിൽ എന്താണുള്ളത്

  • Lamp body (x4 for 4-pack)
  • Lamp post (x4 for 4-pack)
  • Screw accessories (for installation)
  • വിദൂര നിയന്ത്രണം (x1)
  • ഇൻസ്ട്രക്ഷൻ മാനുവൽ (x1)

സ്പെസിഫിക്കേഷനുകൾ

ബ്രാൻഡ്OKPRO
മോഡൽ നമ്പർO-168XBJ
മെറ്റീരിയൽഅക്രിലോണിട്രൈൽ ബ്യൂട്ടാഡീൻ സ്റ്റൈറൈൻ (എബിഎസ്)
പ്രകാശ സ്രോതസ്സ്എൽഇഡി
LED- കളുടെ എണ്ണം168
ഇളം നിറം6500K (വെള്ള)
തെളിച്ചം24000 ല്യൂമെൻ
വാല്യംtage6 വോൾട്ട്
പവർ ഉറവിടംസൗരോർജ്ജം
ജല പ്രതിരോധ നിലIP66 വാട്ടർപ്രൂഫ്
പ്രത്യേക സവിശേഷതകൾEnergy Efficient, Motion Sensor, Timer, Adjustable Bracket
മൗണ്ടിംഗ് തരംമതിൽ മൗണ്ട്
ഇനത്തിന്റെ അളവുകൾ (L x W x H)7.87"L x 1.18"W x 9.1"H
ഇനത്തിൻ്റെ ഭാരം1.1 പൗണ്ട്

സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

The OKPRO Solar Outdoor Lights are designed for easy, wire-free installation. Ensure the solar panel receives direct sunlight for optimal charging.

ഒരു ഇൻസ്റ്റലേഷൻ ലൊക്കേഷൻ തിരഞ്ഞെടുക്കുന്നു

  • Select a location where the solar panel can receive at least 6-8 hours of direct sunlight daily.
  • Avoid areas under eaves, trees, or other obstructions that may block sunlight.
  • Consider the desired illumination area and the motion sensor's range when positioning.

അസംബ്ലി ഘട്ടങ്ങൾ

  1. എൽ അറ്റാച്ചുചെയ്യുകamp പോസ്റ്റ്: എൽ സുരക്ഷിതമാക്കുകamp post to the back of the lamp body using the provided screws. Ensure it is firmly attached.
  2. ബ്രാക്കറ്റ് മൌണ്ട് ചെയ്യുക: Use the screw accessories to securely mount the adjustable bracket to your desired surface (e.g., wall, fence post).
  3. ലൈറ്റ് അറ്റാച്ചുചെയ്യുക: എൽ സ്ലൈഡ് ചെയ്യുകamp post with the attached light body onto the mounted bracket. Tighten any securing screws to prevent movement.
  4. ആംഗിൾ ക്രമീകരിക്കുക: Utilize the 180° adjustable bracket to angle the solar panel for maximum sun exposure and direct the light towards the desired area.
Diagram showing the upgraded solar panel and its efficiency.

Image: Illustration of the upgraded solar panel and its features.

Diagram showing the 180 degree free adjustment feature of the solar light.

Image: The 180° adjustable bracket allows for flexible positioning.

Video: This video demonstrates the unboxing and basic assembly of the OKPRO Solar Lights, including attaching the bracket and light body.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The OKPRO Solar Outdoor Lights feature an intelligent radar sensor chip with three distinct lighting modes, controllable via the included remote.

വിദൂര നിയന്ത്രണ പ്രവർത്തനങ്ങൾ

  • ഓൺ/ഓഫ്: Turns the light on or off. When turned off, it will remain off until manually turned on again or until the next dusk-to-dawn cycle if in a sensor mode.
  • Sensor 1 (Mode 1): 100% brightness when motion is detected. Automatically turns off when no motion is detected at night.
  • Sensor 2 (Mode 2): 100% brightness when motion is detected. After 30 seconds of no motion, it switches to 30% brightness.
  • Sensor 3 (Mode 3): Lights automatically turn on at night at 50% brightness, remaining constant.
  • Timer Functions (1H/2H/3H/5H to Sensor): After the set time (1, 2, 3, or 5 hours) expires, the light will switch to motion sensor Mode 1.
  • 4H: The light will turn on at high brightness for 4 hours, then automatically turn off.
  • സ്വയമേവ: Activates the dusk-to-dawn sensor, automatically turning the light on at dusk and off at dawn.
  • പുന SE സജ്ജമാക്കുക: Resets the light to its default settings.
Diagram showing the remote control and its various buttons for different lighting modes and timer functions.

Image: Remote control and its functions for setting lighting modes.

മെയിൻ്റനൻസ്

To ensure optimal performance and longevity of your OKPRO Solar Outdoor Lights, follow these maintenance guidelines:

  • വൃത്തിയുള്ള സോളാർ പാനൽ: പതിവായി സോഫ്റ്റ്, ഡി ക്ലീനർ ഉപയോഗിച്ച് സോളാർ പാനൽ തുടയ്ക്കുക.amp പൊടി, അഴുക്ക്, അവശിഷ്ടങ്ങൾ എന്നിവ നീക്കം ചെയ്യാൻ തുണി ഉപയോഗിക്കുക. വൃത്തിയുള്ള പാനൽ കാര്യക്ഷമമായ ചാർജിംഗ് ഉറപ്പാക്കുന്നു.
  • കേടുപാടുകൾക്കായി പരിശോധിക്കുക: Periodically check the light body, bracket, and wiring (if any) for signs of wear, damage, or loose connections.
  • തടസ്സങ്ങൾ മായ്‌ക്കുക: പുതിയ തടസ്സങ്ങളൊന്നും (ഉദാ: വളരുന്ന ശാഖകൾ, പുതിയ ഘടനകൾ) സൂര്യപ്രകാശം സോളാർ പാനലിൽ എത്തുന്നത് തടയുന്നില്ലെന്ന് ഉറപ്പാക്കുക.
  • ബാറ്ററി കെയർ: The integrated battery is designed for long-term use. Avoid disassembling the unit to access the battery unless performed by a qualified technician.
Diagram illustrating how to keep water out to protect LED beads versus water damaging LEDs.

Image: Proper care helps protect the LED beads from water damage.

ട്രബിൾഷൂട്ടിംഗ്

നിങ്ങളുടെ സോളാർ ലൈറ്റ് പ്രതീക്ഷിച്ചതുപോലെ പ്രവർത്തിക്കുന്നില്ലെങ്കിൽ, താഴെപ്പറയുന്ന പൊതുവായ പ്രശ്നങ്ങളും പരിഹാരങ്ങളും പരിശോധിക്കുക:

പ്രശ്നംസാധ്യമായ കാരണംപരിഹാരം
രാത്രി വെളിച്ചം തെളിയുന്നില്ല.സോളാർ ചാർജ് അപര്യാപ്തമാണ്.Ensure the solar panel is in direct sunlight for 6-8 hours daily. Clean the solar panel surface.
വെളിച്ചം മങ്ങുന്നു അല്ലെങ്കിൽ മിന്നിമറയുന്നു.കുറഞ്ഞ ബാറ്ററി ചാർജ് അല്ലെങ്കിൽ വൃത്തികെട്ട സോളാർ പാനൽ.Allow several days of full sunlight charging. Clean the solar panel.
മോഷൻ സെൻസർ പ്രവർത്തിക്കുന്നില്ല.Sensor obstructed or incorrect mode selected.Ensure the sensor is clear of obstructions. Verify the light is set to a motion sensor mode (Mode 1 or Mode 2) using the remote control.
റിമോട്ട് കൺട്രോൾ പ്രതികരിക്കുന്നില്ല.Remote battery depleted or line of sight issue.Replace the remote control battery. Ensure direct line of sight between the remote and the light's IR receiver.

വാറൻ്റി & പിന്തുണ

OKPRO provides a 2 വർഷത്തെ വാറൻ്റി for its street lights. Our products are FCC, CE, and RoHS certified, ensuring quality and safety. If you encounter any issues or have questions regarding your LED solar street lights, please do not hesitate to contact us. Our customer support team is available to assist you.

പിന്തുണയ്ക്ക്, ദയവായി സന്ദർശിക്കുക OKPRO Store on Amazon അല്ലെങ്കിൽ നിങ്ങളുടെ ഉൽപ്പന്ന പാക്കേജിംഗിൽ നൽകിയിരിക്കുന്ന ബന്ധപ്പെടാനുള്ള വിവരങ്ങൾ പരിശോധിക്കുക.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.