YESWELDER LYG-9600A-B Auto-Darkening Welding Helmet

1. ആമുഖം

This manual provides essential information for the safe and effective use of your YESWELDER LYG-9600A-B Auto-Darkening Welding Helmet. Please read these instructions thoroughly before operation to ensure proper function and personal safety. This helmet is designed to protect your eyes and face from sparks, spatter, and harmful radiation under normal welding conditions.

2 സുരക്ഷാ വിവരങ്ങൾ

WARNING: Welding and cutting processes can cause serious injury or death. Always follow safety precautions.

• നേത്ര സംരക്ഷണം: Always wear appropriate eye protection under the welding helmet, such as safety glasses with side shields, to protect against impact and stray UV/IR radiation.
• വെൻ്റിലേഷൻ: Ensure adequate ventilation in your work area to avoid inhaling hazardous fumes and gases.
• അഗ്നി അപകടങ്ങൾ: Be aware of fire hazards. Welding sparks and hot metal can cause fires. Keep a fire extinguisher nearby.
• ഇലക്ട്രിക്കൽ സുരക്ഷ: Ensure all welding equipment is properly grounded and maintained. Avoid contact with live electrical parts.
• UV/IR Radiation: The auto-darkening filter provides continuous UV/IR protection, even in the light state. However, direct exposure to welding arc without proper protection can cause severe eye damage.
• ഹെൽമറ്റ് പരിശോധന: Inspect the helmet and lens regularly for damage. Replace any cracked or scratched parts immediately.

3. ഉൽപ്പന്ന ഘടകങ്ങൾ

The YESWELDER LYG-9600A-B Auto-Darkening Welding Helmet includes the following main components:

• Welding Helmet Shell (PP Material)
• Auto-Darkening Filter (ADF) Lens
• Adjustable Headgear with Comfort Cushion
• Outer and Inner Protective Lenses
• CR2450 Lithium Battery (pre-installed or included)

ചിത്രം 3.1: കഴിഞ്ഞുview of the YESWELDER LYG-9600A-B Welding Helmet and its key features.

4. സജ്ജീകരണം

4.1 Battery Installation/Check

The helmet is solar-powered and uses a replaceable CR2450 lithium battery as a backup. The battery is typically pre-installed.

1. Locate the battery compartment on the auto-darkening filter (ADF) lens.
2. If replacing, remove the old CR2450 battery.
3. പോസിറ്റീവ് (+) വശം മുകളിലേക്ക് അഭിമുഖീകരിക്കുന്ന ഒരു പുതിയ CR2450 ബാറ്ററി ഇടുക.
4. ബാറ്ററി കമ്പാർട്ട്മെൻ്റ് സുരക്ഷിതമായി അടയ്ക്കുക.

Image 4.1: Replaceable CR2450 Battery.

Image 4.2: Solar Powered feature of the lens.

4.2 Headgear Adjustment

Adjust the headgear for a comfortable and secure fit. Proper adjustment ensures the helmet stays in place and the lens is positioned correctly for optimal viewing.

1. ദൃഢത: Use the knob at the back of the headgear to adjust the circumference for a snug fit.
2. Headgear Top: Adjust the top strap to position the helmet vertically on your head.
3. ആംഗിൾ അഡ്ജസ്റ്റ്മെൻ്റ്: Use the side knobs to set the viewing angle of the helmet.
4. ദൂര ക്രമീകരണം: Adjust the distance between your face and the lens for clear vision and comfort.

Image 4.3: Headgear adjustments for optimal fit and comfort.

4.3 Protective Film Removal

Remove any protective films from both sides of the inner and outer protective lenses before use to ensure clear visibility.

5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

5.1 പവർ ഓൺ/ഓഫ്

The helmet is solar-powered and automatically turns on when exposed to light. It will automatically turn off after a period of inactivity to conserve battery life.

5.2 ടെസ്റ്റ് ബട്ടൺ

അമർത്തുക ടെസ്റ്റ് button on the ADF lens to verify that the auto-darkening function is working correctly. The lens should momentarily darken and then return to its light state.

Image 5.1: Test button and low battery indicator on the lens.

5.3 സംവേദനക്ഷമത നിയന്ത്രണം

ദി സെൻസിറ്റിവിറ്റി knob adjusts how easily the lens reacts to welding arc light. Turn the knob to increase or decrease sensitivity based on ambient light conditions and welding process.

Image 5.2: Controls for Delay, Shade, and Sensitivity.

5.4 Delay Control

ദി കാലതാമസം knob controls the time it takes for the lens to return from dark to light state after the welding arc stops. This can be adjusted from 0.1 to 0.8 seconds to prevent eye fatigue from afterglow.

5.5 Shade Control

ദി തണൽ knob allows you to select the desired shade level from DIN 9 to DIN 13, suitable for various welding processes and current levels. Refer to welding safety standards for appropriate shade levels.

5.6 Grind Mode

സജീവമാക്കുക GRIND MODE when performing grinding operations. In this mode, the auto-darkening function is deactivated, and the lens remains in its light state (shade DIN 4) to provide clear visibility while still offering UV/IR protection.

Image 5.3: Wide application for GRIND, STICK, MIG, and TIG modes.

5.7 Welding Modes (MIG, ARC, TIG)

The helmet is suitable for MIG, ARC (MMA), and TIG welding processes. Adjust the shade level, sensitivity, and delay according to the specific welding application and current being used.

Image 5.4: Visual representation of Grind, Stick, MIG, and TIG modes through the lens.

6. പരിപാലനം

6.1 വൃത്തിയാക്കൽ

• Clean the helmet shell with a mild soap and water solution. Avoid harsh chemicals.
• Clean the protective lenses and the ADF lens with a soft, clean cloth and a non-abrasive lens cleaning solution. Do not use solvents.
• Regularly check and clean the arc sensors on the front of the ADF lens to ensure proper function.

6.2 ബാറ്ററി മാറ്റിസ്ഥാപിക്കൽ

When the low battery indicator lights up (typically 2-3 days before full depletion), replace the CR2450 lithium battery as described in Section 4.1.

6.3 സംഭരണം

Store the helmet in a dry, clean place away from direct sunlight and extreme temperatures. Protect the lens from scratches and impact.

7. പ്രശ്‌നപരിഹാരം

8 സ്പെസിഫിക്കേഷനുകൾ

Image 8.1: Key specifications and compliance standards.

9. വാറൻ്റിയും പിന്തുണയും

This YESWELDER product is covered by the manufacturer's standard warranty. For specific warranty details, claims, or technical support, please refer to the warranty card included with your product or visit the official YESWELDER webസൈറ്റ്. വാങ്ങിയതിന്റെ തെളിവായി നിങ്ങളുടെ വാങ്ങൽ രസീത് സൂക്ഷിക്കുക.