TONOR T40LP Low Profile Mic Arm Desk Mount Instruction Manual

ആമുഖം

This manual provides comprehensive instructions for the setup, operation, and maintenance of your TONOR T40LP Low Profile Mic Arm Desk Mount. Please read these instructions carefully before use to ensure proper functionality and longevity of the product.

പാക്കേജ് ഉള്ളടക്കം

പാക്കേജിൽ എല്ലാ ഘടകങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കുക:

• മൈക്രോഫോൺ ബൂം ആം
• ഡെസ്ക് മൗണ്ട് Clamp
• 3/8'' to 5/8'' Screw Adapter
• Four Cable Ties

സജ്ജീകരണ നിർദ്ദേശങ്ങൾ

1. Attach the Desk Mount Clamp: Securely fasten the desk mount clamp to the edge of your desk. Ensure the clamp is tightened firmly to prevent movement. The clamp supports desks up to 2.76 inches (7cm) thick.



2. Insert the Boom Arm: Insert the base of the microphone boom arm into the hole on the desk mount clampcl-ലെ നോബ് മുറുക്കുക.amp to secure the arm in place.
3. Attach Your Microphone:
   • The boom arm features a standard 3/8'' screw.
   • If your microphone requires a 5/8'' screw, use the included 3/8'' to 5/8'' screw adapter.
   • Screw your microphone or microphone shock mount onto the boom arm's screw or adapter.



4. കേബിൾ മാനേജുമെന്റ്: Use the provided cable ties to secure your microphone cable along the boom arm. This helps maintain a tidy workspace and prevents cable interference.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The TONOR T40LP mic arm offers flexible adjustment for optimal microphone positioning.

• തിരശ്ചീന ഭ്രമണം: The arm can rotate 360 degrees horizontally at its base, allowing you to swing the microphone into position or out of the way.
• ലംബ ക്രമീകരണം: The arm features 90-degree vertical adjustment, enabling you to raise or lower the microphone to your desired height.
• Reach Adjustment: The arm extends up to 30.3 inches (77cm) in width and 19.1 inches (48.5cm) in height, accommodating various desk sizes and user preferences.
• ലോഡ് കപ്പാസിറ്റി: The sturdy metal construction supports microphones weighing up to 1.5kg (3.3lbs).

Video Guide: TONOR Microphone Boom Arm Overview

മെയിൻ്റനൻസ്

• വൃത്തിയാക്കൽ: Wipe the mic arm with a soft, dry cloth to remove dust and debris. Avoid using abrasive cleaners or solvents.
• സംയുക്ത പരിശോധന: Periodically check all joints and knobs to ensure they are securely tightened. This maintains stability and prevents unwanted movement.
• Spring Mechanism: The T40LP features a hidden spring design. Avoid disassembling the arm to access internal springs, as this may damage the product and void the warranty.

ട്രബിൾഷൂട്ടിംഗ്

• Arm not holding position: Ensure all adjustment knobs and the desk clamp are tightened securely. Over time, heavy microphones may require re-tightening.
• Noise during adjustment: The T40LP's hidden spring design minimizes noise. If you experience unusual noise, check for any loose components or obstructions.
• Microphone not fitting: Verify that your microphone's screw thread size is either 3/8'' or 5/8''. Use the provided adapter if necessary.

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റി വിവരങ്ങൾ

ഈ ഉൽപ്പന്നം എ 2 വർഷത്തെ വാറൻ്റി. Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, refer to the official TONOR webസൈറ്റ് അല്ലെങ്കിൽ ഉപഭോക്തൃ പിന്തുണയുമായി ബന്ധപ്പെടുക.

ഉപഭോക്തൃ പിന്തുണ

For further assistance, technical support, or inquiries regarding your TONOR T40LP Mic Arm, please visit the official TONOR store or contact their customer service department.

Official TONOR Store: TONOR Amazon Store