Sealy B0CXDNH3XM

Sealy Heated Mattress Pad User Manual

Model: B0CXDNH3XM (Queen Size)

1 പ്രധാനപ്പെട്ട സുരക്ഷാ വിവരങ്ങൾ

Please read all instructions carefully before using your Sealy Heated Mattress Pad. Retain this manual for future reference.

  • ETL സാക്ഷ്യപ്പെടുത്തിയത്: ഈ ഉൽപ്പന്നം ETL സർട്ടിഫൈഡ് ആണ്, ഇത് അംഗീകൃത സുരക്ഷാ മാനദണ്ഡങ്ങൾ പാലിക്കുന്നുണ്ടെന്ന് ഉറപ്പാക്കുന്നു.
  • ശിശുക്കൾ, കുട്ടികൾ, വികലാംഗ വ്യക്തികൾ, അല്ലെങ്കിൽ ചൂടിനോട് സംവേദനക്ഷമതയില്ലാത്ത വ്യക്തികൾ എന്നിവർക്കൊപ്പം ഉപയോഗിക്കരുത്.
  • Do not use with damaged cords or plugs. If the cord is damaged, it must be replaced by the manufacturer or a qualified service agent.
  • Avoid pinching the heating wires. Do not use if the mattress pad is folded, bunched, or creased.
  • ഡ്രൈ ക്ലീനിംഗ് ഉപയോഗിക്കരുത്. ഡ്രൈ ക്ലീനിംഗ് ലായകങ്ങൾ ചൂടാക്കൽ മൂലകത്തിന്റെ ഇൻസുലേഷനെ തകരാറിലാക്കാം.
  • വൃത്തിയാക്കുന്നതിനോ സൂക്ഷിക്കുന്നതിനോ മുമ്പ് എല്ലായ്പ്പോഴും പവർ ഔട്ട്‌ലെറ്റിൽ നിന്ന് മെത്ത പാഡ് അഴിക്കുക.
  • Do not use pins or other metallic objects with this product.
  • Ensure the controller is not covered or placed under bedding during use to prevent overheating.

2. ഉൽപ്പന്നം കഴിഞ്ഞുview

The Sealy Heated Mattress Pad provides customizable warmth and comfort. It features dual-zone heating for Queen and larger sizes, allowing independent temperature control for each side of the bed. The pad is designed with a soft, quilted fabric and includes safety features such as automatic shut-off and overheat protection.

പ്രധാന സവിശേഷതകൾ:

  • Dual Zone Heating: Independent temperature control for left and right sides (Queen and larger sizes).
  • 9 ചൂട് ക്രമീകരണങ്ങൾ: Customize your warmth level from 87°F to 115°F.
  • 1-9 Hour Auto Shut-Off: Set a timer for automatic power off.
  • ETL സാക്ഷ്യപ്പെടുത്തിയത്: Ensures product safety and reliability.
  • മൃദുവായ, പുതച്ച തുണി: Provides comfort and even heat distribution.
  • മെഷീൻ കഴുകാവുന്നവ: വൃത്തിയാക്കാനും പരിപാലിക്കാനും എളുപ്പമാണ്.
  • Deep Pocket Design: Fits mattresses up to 17 inches deep.

3. സജ്ജീകരണ നിർദ്ദേശങ്ങൾ

Follow these steps to properly install your heated mattress pad:

  1. അൺപാക്ക്: Carefully remove the mattress pad from its packaging. Allow it to lie flat for a few minutes to remove any creases.
  2. സ്ഥാനം: Place the heated mattress pad directly on your mattress, ensuring it lies flat without any folds or wrinkles. The connector for the control unit should be positioned at the foot of the bed.
  3. സുരക്ഷിതം: The mattress pad features an elastic deep pocket design. Stretch the elasticized skirt over the corners of your mattress to ensure a snug and secure fit.
Sealy Heated Mattress Pad with deep elastic pockets fitting over a mattress

Image: The deep elastic pockets ensure a secure fit on mattresses up to 17 inches.

  1. കൺട്രോളർ ബന്ധിപ്പിക്കുക: Plug the controller cord into the connector located on the mattress pad. Ensure the connection is firm.
  2. പവർ കണക്ഷൻ: കൺട്രോളറിൽ നിന്ന് പവർ കോർഡ് ഒരു സ്റ്റാൻഡേർഡ് 120V AC ഇലക്ട്രിക്കൽ ഔട്ട്‌ലെറ്റിലേക്ക് പ്ലഗ് ചെയ്യുക. എക്സ്റ്റൻഷൻ കോഡുകളോ പവർ സ്ട്രിപ്പുകളോ ഉപയോഗിച്ച് ഉപയോഗിക്കരുത്.
  3. കവർ: ചൂടാക്കിയ മെത്ത പാഡിന് മുകളിൽ നിങ്ങളുടെ ഫിറ്റ് ചെയ്ത ഷീറ്റും മറ്റ് കിടക്കകളും വയ്ക്കുക.

4. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Your Sealy Heated Mattress Pad is operated via a single control unit for Queen and larger sizes, allowing individual adjustment of two zones.

കൺട്രോളർ പ്രവർത്തനങ്ങൾ:

Sealy Heated Mattress Pad controller with labels for ON/OFF, Heat Level, Left/Right, and Auto-Off Hours

ചിത്രം: വിശദമായത് view of the single control unit for the heated mattress pad.

  • പവർ ഓൺ/ഓഫ്: Press the 'ON/OFF' button to turn the mattress pad on or off. The digital display will illuminate when on.
  • Select Zone (Left/Right): For Queen and larger sizes, press the 'LEFT/RIGHT' button to toggle between controlling the left or right heating zone. The selected zone will be indicated on the display.
  • ഹീറ്റ് ലെവൽ ക്രമീകരിക്കുക: Use the 'HEAT LEVEL' buttons (up/down arrows) to select your desired heat setting from 1 to 9. Setting 1 is the lowest, and 9 is the highest. The temperature range is approximately 87°F to 115°F.
  • ഓട്ടോ-ഓഫ് ടൈമർ സജ്ജമാക്കുക: Use the 'AUTO-OFF HOURS' buttons (up/down arrows) to set the automatic shut-off timer from 1 to 9 hours. The pad will automatically turn off after the selected time.
  • മെമ്മറി പ്രവർത്തനം: The controller retains the last used heat and timer settings for convenience upon next use.

Video: Sealy Electric Mattress Pad with One Controller

Video: This video demonstrates the features and operation of the Sealy Electric Mattress Pad, highlighting the single controller for dual-zone heating.

5. പരിചരണവും പരിപാലനവും

ശരിയായ പരിചരണം നിങ്ങളുടെ ചൂടാക്കിയ മെത്ത പാഡിന്റെ ദീർഘായുസ്സും പ്രകടനവും ഉറപ്പാക്കുന്നു.

കഴുകുന്നതിനുള്ള നിർദ്ദേശങ്ങൾ:

A washing machine with the Sealy Heated Mattress Pad inside, illustrating it is machine washable

Image: The heated mattress pad is machine washable for easy cleaning.

  1. വിച്ഛേദിക്കുക: Always unplug the power cord from the wall outlet and then detach the control unit(s) from the mattress pad before washing.
  2. മുൻകൂട്ടി കുതിർക്കുക (ഓപ്ഷണൽ): For best results, pre-soak the mattress pad for 15 minutes in cold water with a mild detergent.
  3. മെഷീൻ വാഷ്: Wash on a gentle or delicate cycle in a washing machine with water temperature below 30°C (86°F). Use a small amount of mild, non-bleach detergent.
  4. കഴുകുക: Rinse thoroughly on a slow spin cycle.
  5. ഉണക്കൽ: Line dry or tumble dry on a low heat setting. Ensure the mattress pad is completely dry before plugging it back in or storing. Do not use until it is completely dry.

ജാഗ്രത:

  • ഡ്രൈ ക്ലീൻ ചെയ്യരുത്.
  • ബ്ലീച്ച് ചെയ്യരുത്.
  • ഇസ്തിരിയിടരുത്.
  • DO NOT PLUG IN AND POWER UP YOUR HEATED PRODUCT WHILE DAMP.

6. പ്രശ്‌നപരിഹാരം

If you experience issues with your heated mattress pad, please refer to the following common problems and solutions:

പ്രശ്നംസാധ്യമായ കാരണംപരിഹാരം
Mattress pad does not heat.Not plugged in correctly; power outage; controller malfunction.Ensure all cords are securely plugged into the pad, controller, and wall outlet. Check household circuit breaker. Try a different outlet.
Pad heats unevenly or only one side heats.Zone selection incorrect; internal wiring issue.For dual-zone models, ensure the correct zone (LEFT/RIGHT) is selected on the controller. If issue persists, contact customer support.
കൺട്രോളർ ഡിസ്പ്ലേ ഓഫാണ് അല്ലെങ്കിൽ മിന്നുന്നു.Overheat protection activated; loose connection.Unplug the unit for 30 minutes, then plug back in. Ensure all connections are secure. If flashing persists, contact customer support.
Pad is too hot or not warm enough.ഹീറ്റ് ക്രമീകരണം വളരെ കൂടുതലാണ്/താഴ്ന്നതാണ്.Adjust the heat level using the 'HEAT LEVEL' buttons on the controller. Allow 15-30 minutes for the pad to reach the desired temperature.

7 സ്പെസിഫിക്കേഷനുകൾ

ഫീച്ചർവിശദാംശങ്ങൾ
ബ്രാൻഡ്Sealy
മോഡൽB0CXDNH3XM
വലിപ്പംQueen Size (60" x 80")
ഫാബ്രിക് തരംപോളിസ്റ്റർ
ചൂട് ക്രമീകരണങ്ങൾ9 ലെവലുകൾ (87°F - 115°F)
ഓട്ടോ ഷട്ട്-ഓഫ്1-9 മണിക്കൂർ
നിയന്ത്രണ തരംSingle controller for dual zones
പ്രത്യേക സവിശേഷതകൾDeep Pocket, Quilted, Temperature Control, Washable
സുരക്ഷാ സർട്ടിഫിക്കേഷൻETL/FCC സർട്ടിഫൈഡ്
ഉൽപ്പന്ന അളവുകൾ79.92 x 59.84 x 17 ഇഞ്ച്
ഇനത്തിൻ്റെ ഭാരം7.21 പൗണ്ട്
Diagram showing various mattress sizes: Twin, Full, Queen, King, California King with their dimensions

Image: Size dimensions for various mattress pads. This manual specifically covers the Queen size.

8. വാറണ്ടിയും ഉപഭോക്തൃ പിന്തുണയും

For warranty information, technical support, or any questions regarding your Sealy Heated Mattress Pad, please refer to the product packaging or contact Sealy customer service directly. Contact details are typically provided with your purchase or can be found on the official Sealy webസൈറ്റ്.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.